Dan McMahill wrote: > Philipp Klaus Krause wrote: >> Philipp Klaus Krause wrote: >> >>> I have created some custom pcb footprints, but their soldermask >>> clearance is way too big: The pads onb my PLCC32 and smd resonator are >>> free from soldermask, but everything in between them, too. >>> >>> I already tried >>> “changeclearsize(selectedobjects, thickness/2+0.1mm >>> and >>> changeclearsize(selectedobjects, 0.35, mm) >>> (I don't know, how they're supposed to work, I just saw them at >>> http://geda.seul.org/dokuwiki/doku.php?id=geda:pcb_tips, but they didn't >>> do anything as far as I can see; I used ":", then entered the commands >>> in the window that appeared). >>> >>> Philipp >>> >> >> >> It seems you have to" enable view soldermask" for the clearance command >> to work. >> >> Philipp >> > > from > http://pcb.sourceforge.net/pcb-20060321.html/Actions.html#index-ChangeClearSize_0028_0029-547 > > > > ChangeClearSize(Object, value[, unit]) > ChangeClearSize(SelectedPins|SelectedVias, value[, unit]) > The effect of this action depends on if the soldermask display is > presently turned on or off. If soldermask is displayed, then the > soldermask relief size will be changed. If soldermask display is turned > off, then the clearance to polygons will be changed. unit is "mil" or > "mm". If not specified the units will default to the internal unit of > 0.01 mil. > > Yeah, we know the manual isn't great, but it is improving! > -Dan >
It seems I should pay more attention to the manual "where there's nice short instructions for creating footprints, which doesn't cover things like soldermasks though" (and less to the wiki, where there is an obscure 36-step instruction to create footprints, but it doesn't say that you should "enable view soldermask as step 14.5"). Philipp
