I was reading through this relation-chain and the only thing that looked not 
quite right is the inconsistent commit message style: some of these commits 
have it in indicative mood, sometimes in imperative, sometimes plural and 
sometimes singular.  Frankly this is rather distracting.  I was hoping that 
somewhere on the "Contributing" page the standard what the commit message 
should look like would be spelled out.  For example in the Eclipse project we 
say this on the "Contributing" page: "The first line describes the change made. 
It is written in the imperative mood, and should say what happens when the 
patch is applied. ..."  
(https://github.com/eclipse-openj9/openj9/blob/master/CONTRIBUTING.md)  To my 
surprise, gem5's "Contributing" page is silent on this matter -- although (at 
least on the few first pages of the commit log) all other commits but the ones 
in this relation-chain are consistent.

What is the procedure for PRs to the Contributing Guide?


-----"Bobby Bruce via gem5-dev" <[email protected]> wrote: -----
To: "gem5 Developer List" <[email protected]>
From: "Bobby Bruce via gem5-dev" <[email protected]>
Date: 12/03/2021 09:43PM
Cc: "Melissa Jost" <[email protected]>, [email protected], "Joël 
Porquet-Lupine" <[email protected]>, "Bobby Bruce" <[email protected]>
Subject: [gem5-dev] LupIO: Friendly IO Devices for gem5 (reviews appreciated!)

Dear all,

Here at UC Davis two undergraduate students, Melissa Jost and Laura Hinman, 
have been working on incorporating LupIO devices into gem5.

For those unaware, LupIO devices were developed by Prof. Joel Porquet-Lupine as 
a set of open-source I/O devices to be used for teaching. They were designed to 
model a complete set of I/O devices that are neither too complex to teach in a 
classroom setting, or too simple to translate to understanding real-world 
devices. Our collection consists of a real-time clock, random number generator, 
terminal device, block device, system controller, timer device, programmable 
interrupt controller, as well as an inter-processor interrupt controller. A 
more detailed outline of LupIO can be found here: 
https://luplab.cs.ucdavis.edu/assets/lupio/wcae21-porquet-lupio-paper.pdf . 
Within gem5, these devices offer the capability to run simulations with a 
complete set of I/O devices that are both easy to understand and manipulate.

Prior to Melissa and Laura's work these devices were only available for use 
with QEMU. They have worked diligently over the past term to incorporate these 
into gem5 for the RISCV ISA. They have incrementally added each device into 
gem5, and into a LupV gem5 Board (LupvBoard) which, when using gem5 alongside 
the correct device drivers in Linux, provides the capability of booting a 
RISC-V Linux system with SMP support.

At present this work exists as a relation-chain in Gerrit: 
https://gem5-review.googlesource.com/c/public/gem5/+/53040. We would appreciate 
feedback on this relation-chain by those interested in this work. We hope we 
can get this chain submitted into the develop branch soon so it can be part of 
the gem5 v21.2 release.

For those interested in setting up and running the LupvBoard, an example 
configuration script has been included at the top of the relation chain: 
https://gem5-review.googlesource.com/c/public/gem5/+/53046.

Kind regards,
Bobby

--
Dr. Bobby R. Bruce
Room 3050,
Kemper Hall, UC Davis
Davis,
CA, 95616

web: https://www.bobbybruce.net 
_______________________________________________
gem5-dev mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________
gem5-dev mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Reply via email to