thanks Musharaf,
I use the file which updated by "Fernando A. Endo, PhD student and researcher"
, and i got the output exact same with command used in Tutorial.
The command you write also working good.
thanks again for your kind help (Your emailed was junk , I saw today)
regards
Mir
--- On Tue, 27/11/12, Musharaf Hussain <[email protected]> wrote:
From: Musharaf Hussain <[email protected]>
Subject: Re: [gem5-users] simulation doesn't end with Queens benchmark
To: "gem5 users mailing list" <[email protected]>
Date: Tuesday, 27 November, 2012, 2:38 AM
Hi Mir
You just follow my instructions. At first will take less number input instead
of 16 like 8 or 10. You can input cpu name also.
May be you instruction will be like below.
talpur@talpur-OptiPlex-380:~/gem5$ ./build/ARM/gem5.opt configs/example/se.py
-c queens1 -o 10 --cpu-type=arm_detailed --caches --l2cache
with best
---
Musharaf
--- On Fri, 11/16/12, Fernando Endo <[email protected]> wrote:
From: Fernando Endo <[email protected]>
Subject: Re: [gem5-users] simulation doesn't end with Queens benchmark
To: "gem5 users mailing list"
<[email protected]>
Date: Friday, November 16, 2012, 5:30 AM
Hello,
Have you tried first running it in your PC?
As I can remember, there was a stuff to fix in the code, let me check for you.
Regards,
--Fernando A. Endo, PhD student and researcher
Université de Grenoble, UJF
France
2012/11/16 mir shan <[email protected]>
Hi CommunityMy simulation couldn't complete even after 5 hours, I left the
system and after 5 hour its on same position, Below is the snip of my prompt.
talpur@talpur-OptiPlex-380:~/gem5$ ./build/ARM/gem5.opt configs/example/se.py
-c queens1 -o 16
gem5 Simulator System. http://gem5.orggem5 is copyrighted software; use the
--copyright option for details.
gem5 compiled Nov 2 2012
16:48:11gem5 started Nov 16 2012 14:52:59gem5 executing on talpur-OptiPlex-380
command line: ./build/ARM/gem5.opt configs/example/se.py -c queens1 -o 16
Global frequency set at 1000000000000 ticks per second0:
system.remote_gdb.listener: listening for remote gdb #0 on port 7000
**** REAL SIMULATION ****info: Entering event queue @ 0. Starting
simulation...16 queens on a 16x16 board...
regardsMir
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
-----Inline Attachment Follows-----
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
-----Inline Attachment Follows-----
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
