Hi all,
I am having an issue with the instruction type attributed to the
microcoded jump of x86, "br". In particular, it is considered as a
NoOp_class instruction, while for my case, I need it to be of the IntAlu
type.
Following what has been done for other insts (e.g. multiplication), I
set op_class = "IntAluOp" in the definition of "br"
(src/arch/x86/isa/microops/seqop.isa).
I then recompiled, and gem5 seemed to acknowledge that I made some
changes in the ISA definition. However, at runtime, nothing has changed,
br is still of type NoOp_class.
I also tried clearing the whole gem5/build folder and compiling again,
without success.
This is strange as mul1s (the multiplication uop) is considered as an
IntMult uop, and this is defined by putting op_class = "IntMultOp" in
the definition of mul1s (src/arch/x86/isa/microops/regop.isa).
Am I looking in the wrong place here?
Thanks in advance,
--
Arthur Perais
INRIA Bretagne Atlantique
Bâtiment 12E, Bureau E303, Campus de Beaulieu
35042 Rennes, France
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users