The mirror is the current development repository not the stable
repository. There was just a change in the development repository to
switch to using PCI devices for the boot disk. Unfortunately there isn't
really a good way to support both at once, but a new set of kernels is
available on the gem5 download page that support PCI device and coupled
with the config changes in gem5-dev the system will boot. If you want to
use the old kernel for some reason -- you really shouldn't -- you can
replace this line self.realview.ide.disks = [self.cf0] in FSConfig.py
with self.realview.cf_ctrl.disks = [self.cf0]. 

Thanks, 

Ali 

On 28.10.2014 10:27, Erfan Azarkhish via gem5-users wrote: 

> Dear All, 
> 
> I ha 
> ve a problem with booting linux on ARMv8 on gem5-mirror 
> (https://github.com/uart/gem5-mirror [2]): 
> (I need gem5-mirror because of the recent support for XBAR, interleaved 
> addressing, and the new DRAM controller) 
> 
> When I try to boot linux on ARMv8 in the GEM5-STABLE, there is no problem and 
> here is the message I get: 
> [ 2.542771] VFS: Mounted root (ext2 filesystem) on device 8:1. 
> 
> However, when I do the same with GEM5-MIRROR, I get the following message 
> 
> [ 2.542570] VFS: Cannot open root device "sda1" or unknown-block(0,0): error 
> -6 
> [ 2.542571] Please append a correct "root=" boot option; here are the 
> available partitions: 
> [ 2.542572] Kernel panic - not syncing: VFS: Unable to mount root fs on 
> unknown-block(0,0) 
> [ 2.542573] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc2+ #1 
> [ 2.542574] Call trace: 
> [ 2.542575] [<ffffffc000087d5c>] dump_backtrace+0x0/0x12c 
> [ 2.542576] [<ffffffc000087e9c>] show_stack+0x14/0x1c 
> [ 2.542577] [<ffffffc0004943a0>] dump_stack+0x78/0xc4 
> [ 2.542578] [<ffffffc0004912dc>] panic+0xe8/0x208 
> [ 2.542579] [<ffffffc000645d68>] mount_block_root+0x1d8/0x278 
> [ 2.542580] [<ffffffc000645f20>] mount_root+0x118/0x134 
> [ 2.542582] [<ffffffc00064607c>] prepare_namespace+0x140/0x188 
> [ 2.542583] [<ffffffc0006459bc>] kernel_init_freeable+0x1b8/0x1d8 
> [ 2.542584] [<ffffffc00048f5b4>] kernel_init+0x10/0xd4 
> 
> Could someone please help me? 
> 
> Thanks a lot 
> Best, -- 
> 
> Erfan Azarkhish
> Micrel Lab - Viale Carlo Pepoli 3/2 - 40123, Bologna
> DEI - University of Bologna, Italy
> 
> _______________________________________________
> gem5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users [1]

 

Links:
------
[1] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
[2] https://github.com/uart/gem5-mirror
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to