Hi Anteneh,

I am not sure I understand. The data in a normal packet will be 64 bytes (a 
cache line). You can check if a packet has payload through hasData, and then 
use get() along with getSize to memcpy it into a ProtoMessage field of variable 
length.

Andreas

From: Anteneh Bogale Gebregiorgis 
<[email protected]<mailto:[email protected]>>
Date: Tuesday, November 18, 2014 at 9:16 AM
To: Andreas Hansson <[email protected]<mailto:[email protected]>>, 
"[email protected]<mailto:[email protected]>" 
<[email protected]<mailto:[email protected]>>
Subject: Re: [gem5-users] Cache trace using communication monitor (commMonitor)

Hi Andreas,

I managed to get the actual data using commMonitor. However, instead of 32-bit 
it gives me 8-bit data. Since the data is 32-bit instruction this 8-bit am 
getting is not sufficient enough. do you have any idea how I can extract the 
full 32-bit data. is it multi-cycle or I can extract them in a single cycle.

Thanks,
Anteneh

On Sun, Nov 16, 2014 at 12:15 PM, Anteneh Bogale Gebregiorgis 
<[email protected]<mailto:[email protected]>> wrote:
Hi Andreas,

As per your recommendation I analyze the packet.proto and I found that 
commMonitor is tracing the address, size, tick and flags but not the data. I 
tried to add a data field to the trace but packet doesn't have a getdata() 
method that allows access to its private pointer data. can you give me some 
clue on adding a pointer filed to trace?

Anteneh


On Fri, Nov 14, 2014 at 3:41 PM, Andreas Hansson 
<[email protected]<mailto:[email protected]>> wrote:
Hi Anteneh,

The ASCII converted only outputs a small subset of the information stored in 
the trace. Have a look at src/proto/packet.proto.

There is currently no PC captured (as a lot of packets would not have this 
information), but there is a pkt_id field that is currently not used by the 
CommMonitor. You could always add a field to the trace…

Andreas

From: Anteneh Bogale Gebregiorgis via gem5-users 
<[email protected]<mailto:[email protected]>>
Reply-To: Anteneh Bogale Gebregiorgis 
<[email protected]<mailto:[email protected]>>, gem5 users mailing list 
<[email protected]<mailto:[email protected]>>
Date: Friday, 14 November 2014 14:36
To: "[email protected]<mailto:[email protected]>" 
<[email protected]<mailto:[email protected]>>
Subject: [gem5-users] Cache trace using communication monitor (commMonitor)


Dear all,

I want to trace the instructions written to instruction cache. I added 
commMonitor between the instruction cache and memory by modifying 
CacheConfig.py as:

system.icachemonitor = 
CommMonitor(trace_file='ICache_content.ptrc',trace_enable=True)
        icache.mem_side = system.icachemonitor.slave
        system.icachemonitor.master = system.membus.slave
I got the protoc file and I decode it using the decode script in util 
directory. the decoded file looks like:

r,27840,64,768,912132500
r,18304,64,768,912189500
r,8302400,64,256,912260500
r,8302464,64,256,912438000
r,8302528,64,256,936300000
r,8302592,64,256,936383000

the question is how to identify the instructions from this file?
or is there another way of obtaining the the trace without using commMonitor?

Thanks,
Anteneh

-- IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.

ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered 
in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, 
Registered in England & Wales, Company No: 2548782



-- IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended recipient, 
please notify the sender immediately and do not disclose the contents to any 
other person, use it for any purpose, or store or copy the information in any 
medium. Thank you.

ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, Registered 
in England & Wales, Company No: 2557590
ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, 
Registered in England & Wales, Company No: 2548782
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to