Hello,

CPI should be numCycles/committedInsts

You can also check the code of the stat computation in the O3CPU, for
example.

Regards,

--
Fernando A. Endo, Post-doc

INRIA Rennes-Bretagne Atlantique
France


2015-12-08 12:06 GMT+01:00 Will <[email protected]>:

> Hello,
>
> I have built SPEC2006 configured with ARM tuned base, tested some
> benchmarks with two level caches using TimingSimpleCPU model in gem5.
> The memory system is configured as default two level caches in
> config/example/se.py and config/commn/CacheConfig.py.
> But the results shown that CPI was incredibly high, 2.6 for 403.gcc and
> 5.8 for 429.mcf, for example.
> Did I miscalculated the CPI which was total cycles divided by sim_ops?
> If so, what is the right way to estimate the CPI with cache system?
>
> I would appreciate for your answer.
>
> Regards,
> Will
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> gem5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to