Hello All,

I am using gem5 for simulation of *alpha architecture* and able to gets
stats for sample example. Also able to convert gem5 stats into xml file
using m5-mcpat-parse-se.py to the power.xml file which is used as input to
McPat.  However, power.xml is not generated correctly, not all stats are
added in power.xml and also when I tried to provided it as input to McPat I
getting following error.
*"some value(s) of
number_of_cores/number_of_L2s/number_of_L3s/number_of_NoCs is/are not
correct!"*

I have tried to look into power.xml file and update it manually but issue
is not resolved as suggested in some previous email chains and
also followed the steps provided on the link :
https://www.cl.cam.ac.uk/~acr31/sicsa/.  I have attached the file which are
generated by gem5, output.xml file and using the parser from github link :
https://github.com/danielpalomino/mcpat-hotspot-parser.

Please help how to to resolve this issue. If anybody have working script
please share with me.

Thanks,
Bala
---------- Begin Simulation Statistics ----------
sim_seconds                                  0.002328                       # 
Number of seconds simulated
sim_ticks                                  2328346000                       # 
Number of ticks simulated
final_tick                                 2328346000                       # 
Number of ticks from beginning of simulation (restored from checkpoints and 
never reset)
sim_freq                                 1000000000000                       # 
Frequency of simulated ticks
host_inst_rate                                1243770                       # 
Simulator instruction rate (inst/s)
host_op_rate                                  1243763                       # 
Simulator op (including micro ops) rate (op/s)
host_tick_rate                              621881635                       # 
Simulator tick rate (ticks/s)
host_mem_usage                                 568276                       # 
Number of bytes of host memory used
host_seconds                                     3.74                       # 
Real time elapsed on the host
sim_insts                                     4656664                       # 
Number of instructions simulated
sim_ops                                       4656664                       # 
Number of ops (including micro ops) simulated
system.voltage_domain.voltage                       1                       # 
Voltage in Volts
system.clk_domain.clock                          1000                       # 
Clock period in ticks
system.mem_ctrls.bytes_read::cpu.inst        18626708                       # 
Number of bytes read from this memory
system.mem_ctrls.bytes_read::cpu.data         7488057                       # 
Number of bytes read from this memory
system.mem_ctrls.bytes_read::total           26114765                       # 
Number of bytes read from this memory
system.mem_ctrls.bytes_inst_read::cpu.inst     18626708                       # 
Number of instructions bytes read from this memory
system.mem_ctrls.bytes_inst_read::total      18626708                       # 
Number of instructions bytes read from this memory
system.mem_ctrls.bytes_written::cpu.data      2598932                       # 
Number of bytes written to this memory
system.mem_ctrls.bytes_written::total         2598932                       # 
Number of bytes written to this memory
system.mem_ctrls.num_reads::cpu.inst          4656677                       # 
Number of read requests responded to by this memory
system.mem_ctrls.num_reads::cpu.data          1613762                       # 
Number of read requests responded to by this memory
system.mem_ctrls.num_reads::total             6270439                       # 
Number of read requests responded to by this memory
system.mem_ctrls.num_writes::cpu.data          648938                       # 
Number of write requests responded to by this memory
system.mem_ctrls.num_writes::total             648938                       # 
Number of write requests responded to by this memory
system.mem_ctrls.bw_read::cpu.inst         7999974231                       # 
Total read bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_read::cpu.data         3216041344                       # 
Total read bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_read::total           11216015575                       # 
Total read bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_inst_read::cpu.inst    7999974231                       # 
Instruction read bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_inst_read::total       7999974231                       # 
Instruction read bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_write::cpu.data        1116213827                       # 
Write bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_write::total           1116213827                       # 
Write bandwidth from this memory (bytes/s)
system.mem_ctrls.bw_total::cpu.inst        7999974231                       # 
Total bandwidth to/from this memory (bytes/s)
system.mem_ctrls.bw_total::cpu.data        4332255172                       # 
Total bandwidth to/from this memory (bytes/s)
system.mem_ctrls.bw_total::total          12332229402                       # 
Total bandwidth to/from this memory (bytes/s)
system.mem_ctrls.readReqs                           0                       # 
Number of read requests accepted
system.mem_ctrls.writeReqs                          0                       # 
Number of write requests accepted
system.mem_ctrls.readBursts                         0                       # 
Number of DRAM read bursts, including those serviced by the write queue
system.mem_ctrls.writeBursts                        0                       # 
Number of DRAM write bursts, including those merged in the write queue
system.mem_ctrls.bytesReadDRAM                      0                       # 
Total number of bytes read from DRAM
system.mem_ctrls.bytesReadWrQ                       0                       # 
Total number of bytes read from write queue
system.mem_ctrls.bytesWritten                       0                       # 
Total number of bytes written to DRAM
system.mem_ctrls.bytesReadSys                       0                       # 
Total read bytes from the system interface side
system.mem_ctrls.bytesWrittenSys                    0                       # 
Total written bytes from the system interface side
system.mem_ctrls.servicedByWrQ                      0                       # 
Number of DRAM read bursts serviced by the write queue
system.mem_ctrls.mergedWrBursts                     0                       # 
Number of DRAM write bursts merged with an existing one
system.mem_ctrls.neitherReadNorWriteReqs            0                       # 
Number of requests that are neither read nor write
system.mem_ctrls.perBankRdBursts::0                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::1                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::2                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::3                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::4                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::5                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::6                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::7                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::8                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::9                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::10                0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::11                0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::12                0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::13                0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::14                0                       # 
Per bank write bursts
system.mem_ctrls.perBankRdBursts::15                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::0                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::1                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::2                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::3                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::4                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::5                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::6                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::7                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::8                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::9                 0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::10                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::11                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::12                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::13                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::14                0                       # 
Per bank write bursts
system.mem_ctrls.perBankWrBursts::15                0                       # 
Per bank write bursts
system.mem_ctrls.numRdRetry                         0                       # 
Number of times read queue was full causing retry
system.mem_ctrls.numWrRetry                         0                       # 
Number of times write queue was full causing retry
system.mem_ctrls.totGap                             0                       # 
Total gap between requests
system.mem_ctrls.readPktSize::0                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::1                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::2                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::3                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::4                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::5                     0                       # 
Read request sizes (log2)
system.mem_ctrls.readPktSize::6                     0                       # 
Read request sizes (log2)
system.mem_ctrls.writePktSize::0                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::1                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::2                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::3                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::4                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::5                    0                       # 
Write request sizes (log2)
system.mem_ctrls.writePktSize::6                    0                       # 
Write request sizes (log2)
system.mem_ctrls.rdQLenPdf::0                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::1                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::2                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::3                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::4                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::5                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::6                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::7                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::8                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::9                       0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::10                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::11                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::12                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::13                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::14                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::15                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::16                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::17                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::18                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::19                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::20                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::21                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::22                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::23                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::24                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::25                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::26                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::27                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::28                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::29                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::30                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.rdQLenPdf::31                      0                       # 
What read queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::0                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::1                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::2                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::3                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::4                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::5                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::6                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::7                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::8                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::9                       0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::10                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::11                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::12                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::13                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::14                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::15                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::16                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::17                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::18                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::19                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::20                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::21                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::22                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::23                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::24                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::25                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::26                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::27                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::28                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::29                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::30                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::31                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::32                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::33                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::34                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::35                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::36                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::37                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::38                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::39                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::40                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::41                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::42                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::43                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::44                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::45                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::46                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::47                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::48                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::49                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::50                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::51                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::52                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::53                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::54                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::55                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::56                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::57                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::58                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::59                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::60                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::61                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::62                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.wrQLenPdf::63                      0                       # 
What write queue length does an incoming req see
system.mem_ctrls.totQLat                            0                       # 
Total ticks spent queuing
system.mem_ctrls.totMemAccLat                       0                       # 
Total ticks spent from burst creation until serviced by the DRAM
system.mem_ctrls.totBusLat                          0                       # 
Total ticks spent in databus transfers
system.mem_ctrls.avgQLat                          0                       # 
Average queueing delay per DRAM burst
system.mem_ctrls.avgBusLat                        0                       # 
Average bus latency per DRAM burst
system.mem_ctrls.avgMemAccLat                     0                       # 
Average memory access latency per DRAM burst
system.mem_ctrls.avgRdBW                         0.00                       # 
Average DRAM read bandwidth in MiByte/s
system.mem_ctrls.avgWrBW                         0.00                       # 
Average achieved write bandwidth in MiByte/s
system.mem_ctrls.avgRdBWSys                      0.00                       # 
Average system read bandwidth in MiByte/s
system.mem_ctrls.avgWrBWSys                      0.00                       # 
Average system write bandwidth in MiByte/s
system.mem_ctrls.peakBW                      12800.00                       # 
Theoretical peak bandwidth in MiByte/s
system.mem_ctrls.busUtil                         0.00                       # 
Data bus utilization in percentage
system.mem_ctrls.busUtilRead                     0.00                       # 
Data bus utilization in percentage for reads
system.mem_ctrls.busUtilWrite                    0.00                       # 
Data bus utilization in percentage for writes
system.mem_ctrls.avgRdQLen                       0.00                       # 
Average read queue length when enqueuing
system.mem_ctrls.avgWrQLen                       0.00                       # 
Average write queue length when enqueuing
system.mem_ctrls.readRowHits                        0                       # 
Number of row buffer hits during reads
system.mem_ctrls.writeRowHits                       0                       # 
Number of row buffer hits during writes
system.mem_ctrls.readRowHitRate                   0                       # Row 
buffer hit rate for reads
system.mem_ctrls.writeRowHitRate                  0                       # Row 
buffer hit rate for writes
system.mem_ctrls.avgGap                           0                       # 
Average gap between requests
system.mem_ctrls.pageHitRate                      0                       # Row 
buffer hit rate, read and write combined
system.mem_ctrls_0.actEnergy                        0                       # 
Energy for activate commands per rank (pJ)
system.mem_ctrls_0.preEnergy                        0                       # 
Energy for precharge commands per rank (pJ)
system.mem_ctrls_0.readEnergy                       0                       # 
Energy for read commands per rank (pJ)
system.mem_ctrls_0.writeEnergy                      0                       # 
Energy for write commands per rank (pJ)
system.mem_ctrls_0.refreshEnergy                    0                       # 
Energy for refresh commands per rank (pJ)
system.mem_ctrls_0.actBackEnergy                    0                       # 
Energy for active background per rank (pJ)
system.mem_ctrls_0.preBackEnergy                    0                       # 
Energy for precharge background per rank (pJ)
system.mem_ctrls_0.totalEnergy                      0                       # 
Total energy per rank (pJ)
system.mem_ctrls_0.averagePower                     0                       # 
Core power per rank (mW)
system.mem_ctrls_0.memoryStateTime::IDLE            0                       # 
Time in different power states
system.mem_ctrls_0.memoryStateTime::REF             0                       # 
Time in different power states
system.mem_ctrls_0.memoryStateTime::PRE_PDN            0                       
# Time in different power states
system.mem_ctrls_0.memoryStateTime::ACT             0                       # 
Time in different power states
system.mem_ctrls_0.memoryStateTime::ACT_PDN            0                       
# Time in different power states
system.mem_ctrls_1.actEnergy                        0                       # 
Energy for activate commands per rank (pJ)
system.mem_ctrls_1.preEnergy                        0                       # 
Energy for precharge commands per rank (pJ)
system.mem_ctrls_1.readEnergy                       0                       # 
Energy for read commands per rank (pJ)
system.mem_ctrls_1.writeEnergy                      0                       # 
Energy for write commands per rank (pJ)
system.mem_ctrls_1.refreshEnergy                    0                       # 
Energy for refresh commands per rank (pJ)
system.mem_ctrls_1.actBackEnergy                    0                       # 
Energy for active background per rank (pJ)
system.mem_ctrls_1.preBackEnergy                    0                       # 
Energy for precharge background per rank (pJ)
system.mem_ctrls_1.totalEnergy                      0                       # 
Total energy per rank (pJ)
system.mem_ctrls_1.averagePower                     0                       # 
Core power per rank (mW)
system.mem_ctrls_1.memoryStateTime::IDLE            0                       # 
Time in different power states
system.mem_ctrls_1.memoryStateTime::REF             0                       # 
Time in different power states
system.mem_ctrls_1.memoryStateTime::PRE_PDN            0                       
# Time in different power states
system.mem_ctrls_1.memoryStateTime::ACT             0                       # 
Time in different power states
system.mem_ctrls_1.memoryStateTime::ACT_PDN            0                       
# Time in different power states
system.cpu_voltage_domain.voltage                   1                       # 
Voltage in Volts
system.cpu_clk_domain.clock                       500                       # 
Clock period in ticks
system.cpu.dtb.fetch_hits                           0                       # 
ITB hits
system.cpu.dtb.fetch_misses                         0                       # 
ITB misses
system.cpu.dtb.fetch_acv                            0                       # 
ITB acv
system.cpu.dtb.fetch_accesses                       0                       # 
ITB accesses
system.cpu.dtb.read_hits                      1613762                       # 
DTB read hits
system.cpu.dtb.read_misses                          7                       # 
DTB read misses
system.cpu.dtb.read_acv                             0                       # 
DTB read access violations
system.cpu.dtb.read_accesses                  1613769                       # 
DTB read accesses
system.cpu.dtb.write_hits                      648938                       # 
DTB write hits
system.cpu.dtb.write_misses                         6                       # 
DTB write misses
system.cpu.dtb.write_acv                            0                       # 
DTB write access violations
system.cpu.dtb.write_accesses                  648944                       # 
DTB write accesses
system.cpu.dtb.data_hits                      2262700                       # 
DTB hits
system.cpu.dtb.data_misses                         13                       # 
DTB misses
system.cpu.dtb.data_acv                             0                       # 
DTB access violations
system.cpu.dtb.data_accesses                  2262713                       # 
DTB accesses
system.cpu.itb.fetch_hits                     4656677                       # 
ITB hits
system.cpu.itb.fetch_misses                        16                       # 
ITB misses
system.cpu.itb.fetch_acv                            0                       # 
ITB acv
system.cpu.itb.fetch_accesses                 4656693                       # 
ITB accesses
system.cpu.itb.read_hits                            0                       # 
DTB read hits
system.cpu.itb.read_misses                          0                       # 
DTB read misses
system.cpu.itb.read_acv                             0                       # 
DTB read access violations
system.cpu.itb.read_accesses                        0                       # 
DTB read accesses
system.cpu.itb.write_hits                           0                       # 
DTB write hits
system.cpu.itb.write_misses                         0                       # 
DTB write misses
system.cpu.itb.write_acv                            0                       # 
DTB write access violations
system.cpu.itb.write_accesses                       0                       # 
DTB write accesses
system.cpu.itb.data_hits                            0                       # 
DTB hits
system.cpu.itb.data_misses                          0                       # 
DTB misses
system.cpu.itb.data_acv                             0                       # 
DTB access violations
system.cpu.itb.data_accesses                        0                       # 
DTB accesses
system.cpu.workload.num_syscalls                    9                       # 
Number of system calls
system.cpu.numCycles                          4656693                       # 
number of cpu cycles simulated
system.cpu.numWorkItemsStarted                      0                       # 
number of work items this cpu started
system.cpu.numWorkItemsCompleted                    0                       # 
number of work items this cpu completed
system.cpu.committedInsts                     4656664                       # 
Number of instructions committed
system.cpu.committedOps                       4656664                       # 
Number of ops (including micro ops) committed
system.cpu.num_int_alu_accesses               4526712                       # 
Number of integer alu accesses
system.cpu.num_fp_alu_accesses                 385657                       # 
Number of float alu accesses
system.cpu.num_func_calls                         183                       # 
number of times a function call or return occured
system.cpu.num_conditional_control_insts        67923                       # 
number of instructions that are conditional controls
system.cpu.num_int_insts                      4526712                       # 
number of integer instructions
system.cpu.num_fp_insts                        385657                       # 
number of float instructions
system.cpu.num_int_register_reads             6398856                       # 
number of times the integer registers were read
system.cpu.num_int_register_writes            3617758                       # 
number of times the integer registers were written
system.cpu.num_fp_register_reads               321640                       # 
number of times the floating registers were read
system.cpu.num_fp_register_writes              320032                       # 
number of times the floating registers were written
system.cpu.num_mem_refs                       2262713                       # 
number of memory refs
system.cpu.num_load_insts                     1613769                       # 
Number of load instructions
system.cpu.num_store_insts                     648944                       # 
Number of store instructions
system.cpu.num_idle_cycles                   0.002000                       # 
Number of idle cycles
system.cpu.num_busy_cycles               4656692.998000                       # 
Number of busy cycles
system.cpu.not_idle_fraction                 1.000000                       # 
Percentage of non-idle cycles
system.cpu.idle_fraction                     0.000000                       # 
Percentage of idle cycles
system.cpu.Branches                             69807                       # 
Number of branches fetched
system.cpu.op_class::No_OpClass                   216      0.00%      0.00% # 
Class of executed instruction
system.cpu.op_class::IntAlu                   2265692     48.65%     48.66% # 
Class of executed instruction
system.cpu.op_class::IntMult                        4      0.00%     48.66% # 
Class of executed instruction
system.cpu.op_class::IntDiv                         0      0.00%     48.66% # 
Class of executed instruction
system.cpu.op_class::FloatAdd                   64017      1.37%     50.03% # 
Class of executed instruction
system.cpu.op_class::FloatCmp                       0      0.00%     50.03% # 
Class of executed instruction
system.cpu.op_class::FloatCvt                      11      0.00%     50.03% # 
Class of executed instruction
system.cpu.op_class::FloatMult                  64000      1.37%     51.41% # 
Class of executed instruction
system.cpu.op_class::FloatDiv                       3      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::FloatSqrt                      0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdAdd                        0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdAddAcc                     0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdAlu                        0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdCmp                        0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdCvt                        0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdMisc                       0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdMult                       0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdMultAcc                    0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdShift                      0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdShiftAcc                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdSqrt                       0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatAdd                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatAlu                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatCmp                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatCvt                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatDiv                   0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatMisc                  0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatMult                  0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatMultAcc               0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::SimdFloatSqrt                  0      0.00%     51.41% # 
Class of executed instruction
system.cpu.op_class::MemRead                  1613789     34.66%     86.06% # 
Class of executed instruction
system.cpu.op_class::MemWrite                  648945     13.94%    100.00% # 
Class of executed instruction
system.cpu.op_class::IprAccess                      0      0.00%    100.00% # 
Class of executed instruction
system.cpu.op_class::InstPrefetch                   0      0.00%    100.00% # 
Class of executed instruction
system.cpu.op_class::total                    4656677                       # 
Class of executed instruction
system.membus.trans_dist::ReadReq             6270419                       # 
Transaction distribution
system.membus.trans_dist::ReadResp            6270439                       # 
Transaction distribution
system.membus.trans_dist::WriteReq             648918                       # 
Transaction distribution
system.membus.trans_dist::WriteResp            648918                       # 
Transaction distribution
system.membus.trans_dist::LoadLockedReq            20                       # 
Transaction distribution
system.membus.trans_dist::StoreCondReq             20                       # 
Transaction distribution
system.membus.trans_dist::StoreCondResp            20                       # 
Transaction distribution
system.membus.pkt_count_system.cpu.icache_port::system.mem_ctrls.port      
9313354                       # Packet count per connected master and slave 
(bytes)
system.membus.pkt_count_system.cpu.dcache_port::system.mem_ctrls.port      
4525400                       # Packet count per connected master and slave 
(bytes)
system.membus.pkt_count::total               13838754                       # 
Packet count per connected master and slave (bytes)
system.membus.pkt_size_system.cpu.icache_port::system.mem_ctrls.port     
18626708                       # Cumulative packet size per connected master 
and slave (bytes)
system.membus.pkt_size_system.cpu.dcache_port::system.mem_ctrls.port     
10086989                       # Cumulative packet size per connected master 
and slave (bytes)
system.membus.pkt_size::total                28713697                       # 
Cumulative packet size per connected master and slave (bytes)
system.membus.snoops                                0                       # 
Total snoops (count)
system.membus.snoop_fanout::samples           6919377                       # 
Request fanout histogram
system.membus.snoop_fanout::mean             0.672991                       # 
Request fanout histogram
system.membus.snoop_fanout::stdev            0.469121                       # 
Request fanout histogram
system.membus.snoop_fanout::underflows              0      0.00%      0.00% # 
Request fanout histogram
system.membus.snoop_fanout::0                 2262700     32.70%     32.70% # 
Request fanout histogram
system.membus.snoop_fanout::1                 4656677     67.30%    100.00% # 
Request fanout histogram
system.membus.snoop_fanout::overflows               0      0.00%    100.00% # 
Request fanout histogram
system.membus.snoop_fanout::min_value               0                       # 
Request fanout histogram
system.membus.snoop_fanout::max_value               1                       # 
Request fanout histogram
system.membus.snoop_fanout::total             6919377                       # 
Request fanout histogram

---------- End Simulation Statistics   ----------

Attachment: config.ini
Description: Binary data

<?xml version="1.0" ?>
<component id="root" name="root">
  <component id="system" name="system">
    <!--McPAT will skip the components if number is set to 0 -->
    <param name="number_of_cores" value="2"/>
    <param name="number_of_L1Directories" value="0"/>
    <param name="number_of_L2Directories" value="1"/>
    <param name="number_of_L2s" value="1"/> <!-- This number means how many L2 clusters in each cluster there can be multiple banks/ports -->
    <param name="Private_L2" value="0"/><!--1 Private, 0 shared/coherent -->
    <param name="number_of_L3s" value="0"/> <!-- This number means how many L3 clusters -->
    <param name="number_of_NoCs" value="1"/>
    <param name="homogeneous_cores" value="1"/><!--1 means homo -->
    <param name="homogeneous_L2s" value="1"/>
    <param name="homogeneous_L1Directorys" value="1"/>
    <param name="homogeneous_L2Directorys" value="1"/>
    <param name="homogeneous_L3s" value="1"/>
    <param name="homogeneous_ccs" value="1"/><!--cache coherece hardware -->
    <param name="homogeneous_NoCs" value="1"/>
    <param name="core_tech_node" value="90"/><!-- nm -->
    <param name="target_core_clockrate" value=""/><!--MHz -->
    <param name="temperature" value="380"/> <!-- Kelvin -->
    <param name="number_cache_levels" value="2"/>
    <param name="interconnect_projection_type" value="0"/><!--0: agressive wire technology; 1: conservative wire technology -->
    <param name="device_type" value="0"/><!--0: HP(High Performance Type); 1: LSTP(Low standby power) 2: LOP (Low Operating Power)  -->
    <param name="longer_channel_device" value="0"/><!-- 0 no use; 1 use when approperiate -->
    <param name="machine_bits" value="64"/>
    <param name="virtual_address_width" value="64"/>
    <param name="physical_address_width" value="52"/>
    <param name="virtual_memory_page_size" value="4096"/>
    <!-- address width determins the tag_width in Cache, LSQ and buffers in cache controller 
	 default value is machine_bits, if not set --> 
    <stat name="runtime_sec" value=""/>
    <stat name="total_cycles" value="4656693"/>
    <stat name="idle_cycles" value="0"/>
    <stat name="busy_cycles"  value="4656693"/>
    <!--This page size(B) is complete different from the page size in Main memo secction. this page size is the size of 
	     virtual memory from OS/Archi perspective; the page size in Main memo secction is the actuall physical line in a DRAM bank  -->
    <!-- *********************** cores ******************* -->
    <component id="system.core0" name="core0">
      <!-- Core property -->
      <param name="clock_rate" value=""/>
      <!-- for cores with unknow timing, set to 0 to force off the opt flag -->
      <param name="opt_local" value="1"/>
      <param name="instruction_length" value="32"/>
      <param name="opcode_width" value="7"/>
      <param name="x86" value="0"/>
      <param name="micro_opcode_width" value="8"/>
      <param name="machine_type" value="0"/>
      <!-- inorder/OoO; 1 inorder; 0 OOO-->
      <param name="number_hardware_threads" value="1"/>
      <!-- number_instruction_fetch_ports(icache ports) is always 1 in single-thread processor,
	   it only may be more than one in SMT processors. BTB ports always equals to fetch ports since 
	   branch information in consective branch instructions in the same fetch group can be read out from BTB once.--> 
      <param name="fetch_width" value=""/>
      <!-- fetch_width determins the size of cachelines of L1 cache block -->
      <param name="number_instruction_fetch_ports" value="1"/>
      <param name="decode_width" value=""/>
      <!-- decode_width determins the number of ports of the 
	   renaming table (both RAM and CAM) scheme -->
      <param name="issue_width" value=""/>
      <param name="peak_issue_width" value=""/>
      <!-- issue_width determins the number of ports of Issue window and other logic 
	   as in the complexity effective proccessors paper; issue_width==dispatch_width -->
      <param name="commit_width" value=""/>
      <!-- commit_width determins the number of ports of register files -->
      <param name="fp_issue_width" value="2"/>
      <param name="prediction_width" value="1"/> 
      <!-- number of branch instructions can be predicted simultannouesl-->
      <!-- Current version of McPAT does not distinguish int and floating point pipelines 
	   Theses parameters are reserved for future use.--> 
      <param name="pipelines_per_core" value="1,1"/>
      <!--integer_pipeline and floating_pipelines, if the floating_pipelines is 0, then the pipeline is shared-->
      <param name="pipeline_depth" value="7,7"/>
      <!-- pipeline depth of int and fp, if pipeline is shared, the second number is the average cycles of fp ops -->
      <!-- issue and exe unit-->
      <param name="ALU_per_core" value="4"/>
      <!-- contains an adder, a shifter, and a logical unit -->
      <param name="MUL_per_core" value="0"/>
      <!-- For MUL and Div -->
      <param name="FPU_per_core" value="1"/>		
      <!-- buffer between IF and ID stage -->
      <param name="instruction_buffer_size" value="32"/>
      <!-- buffer between ID and sche/exe stage -->
      <param name="decoded_stream_buffer_size" value="16"/>
      <param name="instruction_window_scheme" value="0"/><!-- 0 PHYREG based, 1 RSBASED-->
      <!-- McPAT support 2 types of OoO cores, RS based and physical reg based-->
      <param name="instruction_window_size" value=""/>
      <param name="fp_instruction_window_size" value=""/>
      <!-- the instruction issue Q as in Alpha 21264; The RS as in Intel P6 -->
      <param name="ROB_size" value=""/>
      <!-- each in-flight instruction has an entry in ROB -->
      <!-- registers -->
      <param name="archi_Regs_IRF_size" value="32"/>		
      <param name="archi_Regs_FRF_size" value="32"/>
      <!--  if OoO processor, phy_reg number is needed for renaming logic, 
	    renaming logic is for both integer and floating point insts.  -->
      <param name="phy_Regs_IRF_size" value=""/>
      <param name="phy_Regs_FRF_size" value=""/>
      <!-- rename logic -->
      <param name="rename_scheme" value="1"/>
      <!-- can be RAM based(0) or CAM based(1) rename scheme 
	   RAM-based scheme will have free list, status table;
	   CAM-based scheme have the valid bit in the data field of the CAM 
	   both RAM and CAM need RAM-based checkpoint table, checkpoint_depth=# of in_flight instructions;
	   Detailed RAT Implementation see TR -->
      <param name="register_windows_size" value="0"/>
      <!-- how many windows in the windowed register file, sun processors;
	   no register windowing is used when this number is 0 -->
      <!-- In OoO cores, loads and stores can be issued whether inorder(Pentium Pro) or (OoO)out-of-order(Alpha),
	   They will always try to exeute out-of-order though. -->
      <param name="LSU_order" value="OoO"/>
      <param name="store_buffer_size" value=""/>
      <!-- By default, in-order cores do not have load buffers -->
      <param name="load_buffer_size" value=""/>	
      <!-- number of ports refer to sustainable concurrent memory accesses --> 
      <param name="memory_ports" value="2"/>	
      <!-- max_allowed_in_flight_memo_instructions determins the # of ports of load and store buffer
	   as well as the ports of Dcache which is connected to LSU -->	
      <!-- dual-pumped Dcache can be used to save the extra read/write ports -->
      <param name="RAS_size" value=""/>						
      <!-- general stats, defines simulation periods;require total, idle, and busy cycles for senity check  -->
      <!-- please note: if target architecture is X86, then all the instrucions refer to (fused) micro-ops -->
      <stat name="total_instructions" value="400000"/>
			<stat name="int_instructions" value="200000"/>
			<stat name="fp_instructions" value="100000"/>
			<stat name="branch_instructions" value="100000"/>
			<stat name="branch_mispredictions" value="0"/>
			<stat name="load_instructions" value="0"/>
			<stat name="store_instructions" value="50000"/>
			<stat name="committed_instructions" value="400000"/>
			<stat name="committed_int_instructions" value="200000"/>
			<stat name="committed_fp_instructions" value="100000"/>
      <stat name="pipeline_duty_cycle" value="1"/><!-- lteq 1, runtime_ipc/peak_ipc; averaged for all cores if homogenous -->
      <!-- the following cycle stats are used for heterogeneouse cores only, 
	   please ignore them if homogeneouse cores -->
      <stat name="total_cycles" value="4656693"/>
      <stat name="idle_cycles" value=""/>
      <stat name="busy_cycles" value=""/>
      <!-- instruction buffer stats -->
      <!-- ROB stats, both RS and Phy based OoOs have ROB
	   performance simulator should capture the difference on accesses,
	   otherwise, McPAT has to guess based on number of commited instructions. -->
      <stat name="ROB_reads" value=""/>
      <stat name="ROB_writes" value=""/>
      <!-- RAT accesses -->
      <stat name="rename_reads" value=""/> <!--lookup in renaming logic -->
      <stat name="rename_writes" value="0"/><!--update dest regs. renaming logic -->
      <stat name="fp_rename_reads" value=""/>
      <stat name="fp_rename_writes" value="0"/>
      <!-- decode and rename stage use this, should be total ic - nop -->
      <!-- Inst window stats -->
      <stat name="inst_window_reads" value=""/>
      <stat name="inst_window_writes" value=""/>
      <stat name="inst_window_wakeup_accesses" value=""/>
      <stat name="fp_inst_window_reads" value=""/>
      <stat name="fp_inst_window_writes" value=""/>
      <stat name="fp_inst_window_wakeup_accesses" value=""/>
      <!--  RF accesses -->
      <stat name="int_regfile_reads" value=""/>
      <stat name="float_regfile_reads" value=""/>
      <stat name="int_regfile_writes" value=""/>
      <stat name="float_regfile_writes" value=""/>
      <!-- accesses to the working reg -->
      <stat name="function_calls" value=""/>
      <stat name="context_switches" value="9"/>
      <!-- Number of Windowes switches (number of function calls and returns)-->
      <!-- Alu stats by default, the processor has one FPU that includes the divider and 
	   multiplier. The fpu accesses should include accesses to multiplier and divider  -->
      <stat name="ialu_accesses" value=""/>			
      <stat name="fpu_accesses" value=""/>
      <stat name="mul_accesses" value="0"/>
      <stat name="cdb_alu_accesses" value="0"/>
      <stat name="cdb_mul_accesses" value="0"/>
      <stat name="cdb_fpu_accesses" value="0"/>
      <!-- multiple cycle accesses should be counted multiple times, 
	   otherwise, McPAT can use internal counter for different floating point instructions 
	   to get final accesses. But that needs detailed info for floating point inst mix -->
      <!--  currently the performance simulator should 
	    make sure all the numbers are final numbers, 
	    including the explicit read/write accesses, 
	    and the implicite accesses such as replacements and etc.
	    Future versions of McPAT may be able to reason the implicite access
	    based on param and stats of last level cache
	    The same rule applies to all cache access stats too!  -->
      <!-- following is AF for max power computation. 
	   Do not change them, unless you understand them-->
      <stat name="IFU_duty_cycle" value="1"/>			
      <stat name="LSU_duty_cycle" value="1"/>
      <stat name="MemManU_I_duty_cycle" value="1"/>
      <stat name="MemManU_D_duty_cycle" value="1"/>
      <stat name="ALU_duty_cycle" value="1"/>
      <stat name="MUL_duty_cycle" value="0.3"/>
      <stat name="FPU_duty_cycle" value="1"/>
      <stat name="ALU_cdb_duty_cycle" value="1"/>
      <stat name="MUL_cdb_duty_cycle" value="0.3"/>
      <stat name="FPU_cdb_duty_cycle" value="1"/>
      <param name="number_of_BPT" value="2"/>
      <component id="system.core0.predictor" name="PBT">
	<!-- branch predictor; tournament predictor see Alpha implementation -->
	<param name="local_predictor_size" value="10,3"/>
	<param name="local_predictor_entries" value="1024"/>
	<param name="global_predictor_entries" value="4096"/>
	<param name="global_predictor_bits" value="2"/>
	<param name="chooser_predictor_entries" value="4096"/>
	<param name="chooser_predictor_bits" value="2"/>
	<!-- These parameters can be combined like below in next version
	     <param name="load_predictor" value="10,3,1024"/>
	     <param name="global_predictor" value="4096,2"/>
	     <param name="predictor_chooser" value="4096,2"/>
	     -->
      </component>
      <component id="system.core0.itlb" name="itlb">
	<param name="number_entries" value="48"/>
	<stat name="total_accesses" value="4656693"/>
	<stat name="total_misses" value="16"/>
	<stat name="conflicts" value="0"/><!-- TODO -->
	<!-- there is no write requests to itlb although writes happen to itlb after miss, 
	     which is actually a replacement -->
      </component>
      <component id="system.core0.icache" name="icache">
	<!-- there is no write requests to itlb although writes happen to it after miss, 
	     which is actually a replacement -->
	<param name="icache_config" value=""/>
	<!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy,  -->
	<!-- cache_policy;//0 no write or write-though with non-write allocate;1 write-back with write-allocate -->
	<param name="buffer_sizes" value=""/>
	<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size--> 
	<stat name="read_accesses" value=""/>
	<stat name="read_misses" value=""/>
	<stat name="conflicts" value=""/>				
      </component>
      <component id="system.core0.dtlb" name="dtlb">
	<param name="number_entries" value="64"/><!--dual threads-->
	<stat name="total_accesses" value="2262713"/>
	<stat name="total_misses" value="13"/>
	<stat name="conflicts" value="0"/><!-- TODO -->
      </component>
      <component id="system.core0.dcache" name="dcache">
	<!-- all the buffer related are optional -->
	<param name="dcache_config" value=""/>
	<param name="buffer_sizes" value=""/>
	<!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
	<stat name="read_accesses" value=""/>
	<stat name="write_accesses" value=""/>
	<stat name="read_misses" value=""/>
	<stat name="write_misses" value=""/>
	<stat name="conflicts" value=""/>	
      </component>
      <param name="number_of_BTB" value="2"/>
      <component id="system.core0.BTB" name="BTB">
	<!-- all the buffer related are optional -->
	<param name="BTB_config" value="6144,4,2,1, 1,3"/> <!--48Kbits -->
	<!-- the parameters are capacity,block_width,associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
	<stat name="read_accesses" value=""/> <!--See IFU code for guideline -->
	<stat name="write_accesses" value=""/>
      </component>
    </component>
    <!-- This block is ignored because number_of_L1Directories = 0 but it still has to be here-->
    <component id="system.L1Directory0" name="L1Directory0">
	<param name="Directory_type" value="0"/>
	<!--0 cam based shadowed tag. 1 directory cache -->	
	<param name="Dir_config" value="4096,2,0,1,100,100, 8"/>
	<!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
	<param name="buffer_sizes" value="8, 8, 8, 8"/>	
	<!-- all the buffer related are optional -->
	<param name="clockrate" value="3400"/>
	<param name="ports" value="1,1,1"/>
	<!-- number of r, w, and rw search ports -->
	<param name="device_type" value="0"/>
	<!-- altough there are multiple access types, 
	     Performance simulator needs to cast them into reads or writes
	     e.g. the invalidates can be considered as writes -->
	<stat name="read_accesses" value="800000"/>
	<stat name="write_accesses" value="27276"/>
	<stat name="read_misses" value="1632"/>
	<stat name="write_misses" value="183"/>
	<stat name="conflicts" value="20"/>	
    </component>
    <!-- This block is ignored because number_of_L2Directories = 0 but it still has to be here-->
    <component id="system.L2Directory0" name="L2Directory0">
      <param name="Directory_type" value="0"/>
      <!--0 cam based shadowed tag. 1 directory cache -->	
      <param name="Dir_config" value="512,4,0,1,1, 1"/>
      <!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
      <param name="buffer_sizes" value="16, 16, 16, 16"/>	
      <!-- all the buffer related are optional -->
      <param name="clockrate" value="1200"/>
      <param name="ports" value="1,1,1"/>
      <!-- number of r, w, and rw search ports -->
      <param name="device_type" value="0"/>
      <!-- altough there are multiple access types, 
	   Performance simulator needs to cast them into reads or writes
	   e.g. the invalidates can be considered as writes -->
      <stat name="read_accesses" value="58824"/>
      <stat name="write_accesses" value="27276"/>
      <stat name="read_misses" value="1632"/>
      <stat name="write_misses" value="183"/>
      <stat name="conflicts" value="100"/>
    </component>
    <component id="system.L20" name="L20">
      <!-- all the buffer related are optional -->
      <param name="L2_config" value=""/>
      <!-- the parameters are capacity,block_width, associativity, bank, throughput w.r.t. core clock, latency w.r.t. core clock,output_width, cache policy -->
      <param name="buffer_sizes" value=""/>
      <!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
      <param name="clockrate" value=""/>
      <param name="ports" value="1,1,1"/>
      <!-- number of r, w, and rw ports -->
      <param name="device_type" value="0"/>
      <stat name="read_accesses" value=""/>
      <stat name="write_accesses" value=""/>
      <stat name="read_misses" value=""/>
      <stat name="write_misses" value=""/>
      <stat name="conflicts" value=""/>	
      <stat name="duty_cycle" value="1.0"/>	
    </component>
    
    <!--**********************************************************************-->
    <!-- This block is ignored because number_of_L3s = 0 but you must have it here anyway -->
    <component id="system.L30" name="L30">
      <param name="L3_config" value="16777216,64,16, 16, 16, 100,1"/>
      <!-- the parameters are capacity,block_width, associativity,bank, throughput w.r.t. core clock, latency w.r.t. core clock,-->
      <param name="clockrate" value="850"/>
      <param name="ports" value="1,1,1"/>
      <!-- number of r, w, and rw ports -->
      <param name="device_type" value="0"/>
      <param name="buffer_sizes" value="16, 16, 16, 16"/>
      <!-- cache controller buffer sizes: miss_buffer_size(MSHR),fill_buffer_size,prefetch_buffer_size,wb_buffer_size-->	
      <stat name="read_accesses" value="11824"/>
      <stat name="write_accesses" value="11276"/>
      <stat name="read_misses" value="1632"/>
      <stat name="write_misses" value="183"/>
      <stat name="conflicts" value="0"/>	
      <stat name="duty_cycle" value="1.0"/>	
    </component>
    <!--**********************************************************************-->
    <component id="system.NoC0" name="noc0">
      <param name="clockrate" value="1200"/>
      <param name="type" value="1"/>
      <!--0:bus, 1:NoC , for bus no matter how many nodes sharing the bus
		 at each time only one node can send req -->
      <param name="horizontal_nodes" value="1"/>
      <param name="vertical_nodes" value="1"/>
      <param name="has_global_link" value="1"/>
      <!-- 1 has global link, 0 does not have global link -->
      <param name="link_throughput" value="1"/><!--w.r.t clock -->
      <param name="link_latency" value="1"/><!--w.r.t clock -->
      <!-- througput >= latency -->
      <!-- Router architecture -->
      <param name="input_ports" value="8"/>
      <param name="output_ports" value="7"/>
      <!-- For bus the I/O ports should be 1 -->
      <param name="virtual_channel_per_port" value="2"/>
      <param name="input_buffer_entries_per_vc" value="128"/>
      <param name="flit_bits" value="40"/>
      <param name="chip_coverage" value="1"/>
      <!-- When multiple NOC present, one NOC will cover part of the whole chip. 
	   chip_coverage <=1 -->
	   <param name="link_routing_over_percentage" value="1.0"/>
	   <!-- Links can route over other components or occupy whole area.
		by default, 50% of the NoC global links routes over other 
		components -->
	   <stat name="total_accesses" value="*main::2"/>
	   <!-- This is the number of total accesses within the whole network not for each router -->
	   <stat name="duty_cycle" value="1"/>
    </component>		
    <!--**********************************************************************-->
    <component id="system.mem" name="mem">
      <!-- Main memory property -->
      <param name="mem_tech_node" value="180"/>
      <param name="device_clock" value=""/><!--MHz, this is clock rate of the actual memory device, not the FSB -->
      <param name="peak_transfer_rate" value="*main::16"/><!--MB/S-->
      <param name="internal_prefetch_of_DRAM_chip" value="4"/>
      <!-- 2 for DDR, 4 for DDR2, 8 for DDR3...-->
      <!-- the device clock, peak_transfer_rate, and the internal prefetch decide the DIMM property -->
      <!-- above numbers can be easily found from Wikipedia -->
      <param name="capacity_per_channel" value="4096"/> <!-- MB -->
      <!-- capacity_per_Dram_chip=capacity_per_channel/number_of_dimms/number_ranks/Dram_chips_per_rank
	   Current McPAT assumes single DIMMs are used.--> 		
      <param name="number_ranks" value="2"/>
      <param name="num_banks_of_DRAM_chip" value="8"/>			
      <param name="Block_width_of_DRAM_chip" value="64"/> <!-- B -->
      <param name="output_width_of_DRAM_chip" value="8"/>
      <!--number of Dram_chips_per_rank= 72/output_width_of_DRAM_chip-->
      <!--number of Dram_chips_per_rank= 72/output_width_of_DRAM_chip-->
      <param name="page_size_of_DRAM_chip" value="8"/> <!-- 8 or 16 -->
      <param name="burstlength_of_DRAM_chip" value="8"/>
      <stat name="memory_accesses" value=""/>
      <stat name="memory_reads" value=""/>
      <stat name="memory_writes" value=""/>
    </component>
    <component id="system.mc" name="mc">
      <!-- Memeory controllers are for DDR(2,3...) DIMMs -->
      <!-- current version of McPAT uses published values for base parameters of memory controller
	   improvments on MC will be added in later versions. -->
      <param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
      <param name="mc_clock" value="800"/><!--MHz-->
      <param name="peak_transfer_rate" value="1600"/><!--MB/S-->
      <param name="block_size" value="16"/><!--B-->
      <param name="number_mcs" value="2"/>
      <!-- current McPAT only supports homogeneous memory controllers -->
      <param name="memory_channels_per_mc" value="2"/>
      <param name="number_ranks" value="2"/>
      <param name="withPHY" value="0"/>
      <!-- # of ranks of each channel-->
      <param name="req_window_size_per_channel" value="32"/>
      <param name="IO_buffer_size_per_channel" value="32"/>
      <param name="databus_width" value="32"/>
      <param name="addressbus_width" value="32"/>
      <!-- McPAT will add the control bus width to the addressbus width automatically -->
      <stat name="memory_accesses" value=""/>
      <stat name="memory_reads" value=""/>
      <stat name="memory_writes" value=""/>
      <!-- McPAT does not track individual mc, instead, it takes the total accesses and calculate 
	   the average power per MC or per channel. This is sufficent for most application. 
	   Further trackdown can be easily added in later versions. -->  			
    </component>
    <!--**********************************************************************-->
    <component id="system.niu" name="niu">
      <!-- On chip 10Gb Ethernet NIC, including XAUI Phy and MAC controller  -->
      <!-- For a minimum IP packet size of 84B at 10Gb/s, a new packet arrives every 67.2ns. 
	   the low bound of clock rate of a 10Gb MAC is 150Mhz -->
      <param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
      <param name="clockrate" value="350"/>
      <param name="number_units" value="0"/> <!-- unlike PCIe and memory controllers, each Ethernet controller only have one port -->
      <stat name="duty_cycle" value="1.0"/> <!-- achievable max load lteq 1.0 -->
      <stat name="total_load_perc" value="0.7"/> <!-- ratio of total achived load to total achivable bandwidth  -->
      <!-- McPAT does not track individual nic, instead, it takes the total accesses and calculate 
	   the average power per nic or per channel. This is sufficent for most application. -->  			
    </component>
    <!--**********************************************************************-->
    <component id="system.pcie" name="pcie">
      <!-- On chip PCIe controller, including Phy-->
      <!-- For a minimum PCIe packet size of 84B at 8Gb/s per lane (PCIe 3.0), a new packet arrives every 84ns. 
	   the low bound of clock rate of a PCIe per lane logic is 120Mhz -->
      <param name="type" value="0"/> <!-- 1: low power; 0 high performance -->
      <param name="withPHY" value="1"/>
      <param name="clockrate" value="350"/>
      <param name="number_units" value="0"/>
      <param name="num_channels" value="8"/> <!-- 2 ,4 ,8 ,16 ,32 -->
      <stat name="duty_cycle" value="1.0"/> <!-- achievable max load lteq 1.0 -->
      <stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
      <!-- McPAT does not track individual pcie controllers, instead, it takes the total accesses and calculate 
	   the average power per pcie controller or per channel. This is sufficent for most application. -->  			
    </component>
    <!--**********************************************************************-->
    <component id="system.flashc" name="flashc">
      <param name="number_flashcs" value="0"/>
      <param name="type" value="1"/> <!-- 1: low power; 0 high performance -->
      <param name="withPHY" value="1"/>
      <param name="peak_transfer_rate" value="200"/><!--Per controller sustainable reak rate MB/S -->
      <stat name="duty_cycle" value="1.0"/> <!-- achievable max load lteq 1.0 -->
      <stat name="total_load_perc" value="0.7"/> <!-- Percentage of total achived load to total achivable bandwidth  -->
      <!-- McPAT does not track individual flash controller, instead, it takes the total accesses and calculate 
	   the average power per fc or per channel. This is sufficent for most application -->  			
    </component>
    <!--**********************************************************************-->

  </component>
</component>
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users

Reply via email to