Hi, I am running a Dist GEM-5 simualtion with two nodes, one as server and the other as client. I also have a switch in between them.
I have an etherlink (DistEtherLink) between them. The problem is that I can't ping the server from the client side and vice-versa. So there is no communication between both nodes. Any ideas why is this so ? I use the following command to launch the simulation bash $DIST_M5/util/dist/gem5-dist.sh -n 2 -r $DIST_M5/rundir -c $DIST_M5/ckptdir -s $DIST_M5/configs/dist/sw.py -f $DIST_M5/configs/example/fs.py --fs-args --kernel=$M5_PATH/binaries/vmlinux --machine-type=VExpress_GEM5_V1 --dtb-file=/home/yqureshi/gem5/system/arm/dt/armv8_gem5_v1_1cpu.dtb --disk-image=$M5_PATH/disks/websearch_srv_clt.img --cpu-clock=2GHz --mem-type=DDR4_2400_x64 --mem-ranks=4 --mem-size=16GB --sys-clock=1600MHz --num-cpus=2 --cf-args --ethernet-linkdelay=10us --ethernet-linkspeed=10Gbps -x $DIST_M5/build/ARM/gem5.fast To configure the IP addresses, I run the following on server and client sides On Server: ifconfig enp0s1 172.19.0.2 netmask 255.255.255.0 route add default gw 172.19.0.3 enp0s1 On client: ifconfig enp0s1 172.19.0.3 netmask 255.255.255.0 route add default gw 172.19.0.2 enp0s1 Regards Yasir Mahmood
_______________________________________________ gem5-users mailing list gem5-users@gem5.org http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
