Hello,everyone.
I am studying the code of MOESI_CMP_directory protocol of gem5.
In `MOESI_CMP_directory-L2cache.sm--`the action of
`j_forwardGlobalRequestToLocalOwner`, the `"out_msg.Requestor"` of the request
message is filled in the "machineID" of that L2 cache, so it is the correct
requestor.
But to response that message in `"MOESI_CMP_directory-L1cache.sm"--`the action
of `"ee_sendDataExclusive"` ,when `in_msg.RequestorMachine ==
MachineType:L2Cache`, why is the `out_msg.Destination` filled in
`"mapAddressToRange"`, instead of `"in_msg.Requestor"`? <br>(I think it is the
`"out_msg.Requestor"` value of the request message.)
L2 cache:
action(j_forwardGlobalRequestToLocalOwner, "j", desc="Forward external
request to local owner") {
peek(requestNetwork_in, RequestMsg) {
enqueue( localRequestNetwork_out, RequestMsg, response_latency ) {
out_msg.addr := in_msg.addr;
out_msg.Type := in_msg.Type;
out_msg.Requestor := machineID;// the machineID of the requestor L2
out_msg.RequestorMachine := MachineType:L2Cache;
out_msg.Destination.add(getLocalOwner(cache_entry, in_msg.addr));
out_msg.Type := in_msg.Type;
out_msg.MessageSize := MessageSizeType:Forwarded_Control;
out_msg.Acks := 0 - 1;
}
}
}
L1 cache:
action(ee_sendDataExclusive, "\e", desc="Send data from cache to requestor,
don't keep a shared copy") {
peek(requestNetwork_in, RequestMsg) {
assert(is_valid(cache_entry));
if (in_msg.RequestorMachine == MachineType:L2Cache) {
enqueue(responseNetwork_out, ResponseMsg, request_latency) {
out_msg.addr := address;
out_msg.Type := CoherenceResponseType:DATA_EXCLUSIVE;
out_msg.Sender := machineID;
out_msg.SenderMachine := MachineType:L1Cache;
out_msg.Destination.add(mapAddressToRange(address,
MachineType:L2Cache,
l2_select_low_bit, l2_select_num_bits, intToID(0)));//why do not
filled in "in_msg.Requestor" directly?
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.Dirty := cache_entry.Dirty;
out_msg.Acks := in_msg.Acks;
out_msg.MessageSize := MessageSizeType:Response_Data;
}
DPRINTF(RubySlicc, "Sending exclusive data to L2\n");
}
else {
enqueue(responseNetwork_out, ResponseMsg, request_latency) {
out_msg.addr := address;
out_msg.Type := CoherenceResponseType:DATA_EXCLUSIVE;
out_msg.Sender := machineID;
out_msg.SenderMachine := MachineType:L1Cache;
out_msg.Destination.add(in_msg.Requestor);
out_msg.DataBlk := cache_entry.DataBlk;
out_msg.Dirty := cache_entry.Dirty;
out_msg.Acks := in_msg.Acks;
out_msg.MessageSize := MessageSizeType:ResponseLocal_Data;
}
DPRINTF(RubySlicc, "Sending exclusive data to L1\n");
}
}
}
Thanks,
陈永铭 chenyongming
无线设计部/无线研究院/无线产品经营部 Wireless Design Dept./Wireless Product R&D
Institute/Wireless Product Operation Division
南京市雨花台区花神大道6号中兴通讯二期
ZTE Corporation,6#,Hashen Road,Yuhuatai District,Nanjing,P.R.China,210012
T: +86 025 52877454
E: [email protected]
www.zte.com.cn_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users