I am trying to run ARM-full_system on gem5.when I enter this command for
Performance : {root@farideh-S551LN:/home/farideh/gem5# ./build/ARM/gem5.opt
configs/example/arm/starter_fs.py --cpu="minor" --num-cores=1
--disk-image=/home/farideh/Downloads/fullsystem/disks/linaro-minimal-aarch64.img
--kernel=/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616}
the terminal shows:
{gem5 Simulator System. http://gem5.org gem5 is copyrighted software; use
the --copyright option for details. gem5 compiled May 1 2019 08:46:14 gem5
started Jun 2 2019 11:49:47 gem5 executing on farideh-S551LN, pid 7162
command line: ./build/ARM/gem5.opt configs/example/arm/starter_fs.py
--cpu=minor --num-cores=1
--disk-image=/home/farideh/Downloads/fullsystem/disks/linaro-minimal-aarch64.img
--kernel=/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616
Global frequency set at 1000000000000 ticks per second warn: DRAM device
capacity (8192 Mbytes) does not match the address range assigned (2048
Mbytes) info: kernel located at:
/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616
warn: Bootloader entry point 0x10 overriding reset address 0 warn: Highest
ARM exception-level set to AArch32 but bootloader is for AArch64. Assuming
you wanted these to match. system.vncserver: Listening for connections on
port 5900 system.terminal: Listening for connections on port 3456 0:
system.remote_gdb: listening for remote gdb on port 7000 info: Using
bootloader at address 0x10 info: Using kernel entry physical address at
0x80080000 info: Loading DTB file: /home/farideh/gem5/m5out/system.dtb at
address 0x88000000 warn: Existing EnergyCtrl, but no enabled DVFSHandler
found. info: Entering event queue @ 0. Starting simulation... warn:
ClockedObject: Already in the requested power state, request ignored warn:
SCReg: Access to unknown device dcc0:site0:pos0:fn7:dev0}
then I enter telnet 127.0.0.1 3456 in an other terminal and it shows:Trying
127.0.0.1... Connected to localhost. Escape character is '^]'. ==== m5
slave terminal: Terminal 0 ==== }
after several times I confront by this error about telnet:Connection closed
by foreign host. and another terminal , I see this:
root@farideh-S551LN:/home/farideh/gem5# ./build/ARM/gem5.opt
configs/example/arm/starter_fs.py --cpu="minor" --num-cores=1
--disk-image=/home/farideh/Downloads/fullsystem/disks/linaro-minimal-aarch64.img
--kernel=/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616
gem5 Simulator System. http://gem5.org gem5 is copyrighted software; use
the --copyright option for details.
gem5 compiled May 1 2019 08:46:14 gem5 started Jun 2 2019 11:49:47 gem5
executing on farideh-S551LN, pid 7162 command line: ./build/ARM/gem5.opt
configs/example/arm/starter_fs.py --cpu=minor --num-cores=1
--disk-image=/home/farideh/Downloads/fullsystem/disks/linaro-minimal-aarch64.img
--kernel=/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616
Global frequency set at 1000000000000 ticks per second warn: DRAM device
capacity (8192 Mbytes) does not match the address range assigned (2048
Mbytes) info: kernel located at:
/home/farideh/Downloads/fullsystem/binaries/vmlinux.vexpress_gem5_v1_64.20170616
warn: Bootloader entry point 0x10 overriding reset address 0 warn: Highest
ARM exception-level set to AArch32 but bootloader is for AArch64. Assuming
you wanted these to match. system.vncserver: Listening for connections on
port 5900 system.terminal: Listening for connections on port 3456 0:
system.remote_gdb: listening for remote gdb on port 7000 info: Using
bootloader at address 0x10 info: Using kernel entry physical address at
0x80080000 info: Loading DTB file: /home/farideh/gem5/m5out/system.dtb at
address 0x88000000 warn: Existing EnergyCtrl, but no enabled DVFSHandler
found. info: Entering event queue @ 0. Starting simulation... warn:
ClockedObject: Already in the requested power state, request ignored warn:
SCReg: Access to unknown device dcc0:site0:pos0:fn7:dev0 33342160250:
system.terminal: attach terminal 0 49510353000: system.terminal: detach
terminal 0 62922704750: system.terminal: attach terminal 0 warn: Tried to
read RealView I/O at offset 0x60 that doesn't exist warn: Tried to read
RealView I/O at offset 0x48 that doesn't exist warn: Tried to write RVIO at
offset 0xa8 (data 0) that doesn't exist simulate() limit reached @
18446744073709551615 root@farideh-S551LN:/home/farideh/gem5#
I do not know that Arm-fullsystem runs or not and why is telnet shows
Connection closed by foreign host?
_______________________________________________
gem5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users