Abhishek, I’ve submitted a change (merged today) which should fix the issue you reported. However, you may still have some issues booting the kernel with the O3 CPU depending on the kernel (compilation configs) and boot process you choose. I suggest using the kvm cpu for bootup, take a checkpoint right after the boot, and then restore using the CPU model you want to use (O3 I assume).
Best, On Mon, Jul 1, 2019 at 3:58 PM Abhishek Singh < [email protected]> wrote: > Hello Everyone, > > Yaz: I do not change anything, I am using commit > 2a98a994df296f818b05da90ba073d879562da04 > of gem5. > > Is there anyone who was able to *boot* the full system for x86 ISA using > O3CPU? > > My command line : > > *build/X86/gem5.opt configs/example/fs.py > --kernel=x86_64-vmlinux-2.6.22.9 --disk-image=linux-x86.img > --cpu-type=DerivO3CPU --caches* > > Best regards, > > Abhishek > > > On Fri, Mar 8, 2019 at 2:09 PM Ayaz Akram <[email protected]> wrote: > >> Hi Abhishek, >> >> I wonder if you are using the default CPU configuration for full-system >> or do you have any changes? >> >> Regards >> -Ayaz >> >> On Wed, Mar 6, 2019 at 2:20 PM Abhishek Singh < >> [email protected]> wrote: >> >>> Hello Everyone, >>> >>> I am trying to run the gem5 full system with X86 ISA and DerivO3CPU >>> >>> I have built image and kernel following Jason's Website (ref: >>> http://www.lowepower.com/jason/setting-up-gem5-full-system.html) >>> My image is* Ubuntu 16.04.5 LTS* >>> My kernel is *Linux-4.8.13* >>> Gem5 version: Latest as of 6th March 2019 >>> >>> The image and kernel work fine with Atomic and Timing CPU for x86. >>> But for O3CPU, it gives an error as shown below: >>> """"""""" >>> >>> command line: *./build/X86/gem5.opt configs/example/fs.py >>> --script=./script.rcS >>> --disk-image=/home/abs218/image_kernel/ubuntu-test.img >>> --kernel=/home/abs218/new_fs/gem5/linux-4.8.13/vmlinux --caches --l2cache >>> --cpu-type=DerivO3CPU* >>> >>> >>> Global frequency set at 1000000000000 ticks per second >>> >>> warn: DRAM device capacity (8192 Mbytes) does not match the address >>> range assigned (512 Mbytes) >>> >>> info: kernel located at: /home/abs218/new_fs/gem5/linux-4.8.13/vmlinux >>> >>> system.pc.com_1.device: Listening for connections on port 3456 >>> >>> 0: rtc: Real-time clock set to Sun Jan 1 00:00:00 2012 >>> >>> 0: system.remote_gdb: listening for remote gdb on port 7000 >>> >>> warn: Reading current count from inactive timer. >>> >>> **** REAL SIMULATION **** >>> >>> info: Entering event queue @ 0. Starting simulation... >>> >>> *gem5.opt: build/X86/mem/packet.hh:1047: T* Packet::getPtr() [with T = >>> unsigned char]: Assertion `flags.isSet(STATIC_DATA|DYNAMIC_DATA)' failed* >>> . >>> >>> Program aborted at tick 11637500 >>> >>> --- BEGIN LIBC BACKTRACE --- >>> >>> ./build/X86/gem5.opt(_Z15print_backtracev+0x2c)[0x561f4b44d8bc] >>> >>> ./build/X86/gem5.opt(_Z12abortHandleri+0x4a)[0x561f4b45fc8a] >>> >>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x12890)[0x7f25466db890] >>> >>> /lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7)[0x7f2544e02e97] >>> >>> /lib/x86_64-linux-gnu/libc.so.6(abort+0x141)[0x7f2544e04801] >>> >>> /lib/x86_64-linux-gnu/libc.so.6(+0x3039a)[0x7f2544df439a] >>> >>> /lib/x86_64-linux-gnu/libc.so.6(+0x30412)[0x7f2544df4412] >>> >>> >>> ./build/X86/gem5.opt(_ZN6X86ISA13handleIprReadEP13ThreadContextP6Packet+0x17c)[0x561f4ace817c] >>> >>> >>> ./build/X86/gem5.opt(_ZN7LSQUnitI9O3CPUImplE4readEPN3LSQIS0_E10LSQRequestEi+0x431)[0x561f4aca8781] >>> >>> >>> ./build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE4readEPNS1_10LSQRequestEi+0xad)[0x561f4acee75d] >>> >>> >>> ./build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE11pushRequestERK14RefCountingPtrI13BaseO3DynInstIS0_EEbPhjm5FlagsImEPmP15AtomicOpFunctor+0x523)[0x561f4aceecf3] >>> >>> >>> ./build/X86/gem5.opt(_ZN11BaseDynInstI9O3CPUImplE15initiateMemReadEmj5FlagsImE+0x7b)[0x561f4ac8cb3b] >>> >>> >>> ./build/X86/gem5.opt(_ZNK10X86ISAInst5LdBig11initiateAccEP11ExecContextPN5Trace10InstRecordE+0xd1)[0x561f4b99e521] >>> >>> >>> ./build/X86/gem5.opt(_ZN13BaseO3DynInstI9O3CPUImplE11initiateAccEv+0x45)[0x561f4acbfc15] >>> >>> >>> ./build/X86/gem5.opt(_ZN7LSQUnitI9O3CPUImplE11executeLoadERK14RefCountingPtrI13BaseO3DynInstIS0_EE+0x57)[0x561f4acf87e7] >>> >>> >>> ./build/X86/gem5.opt(_ZN3LSQI9O3CPUImplE11executeLoadERK14RefCountingPtrI13BaseO3DynInstIS0_EE+0x3b)[0x561f4ace8a0b] >>> >>> >>> ./build/X86/gem5.opt(_ZN10DefaultIEWI9O3CPUImplE12executeInstsEv+0xf06)[0x561f4acd6e96] >>> >>> >>> ./build/X86/gem5.opt(_ZN10DefaultIEWI9O3CPUImplE4tickEv+0x8c0)[0x561f4acda9a0] >>> >>> >>> ./build/X86/gem5.opt(_ZN9FullO3CPUI9O3CPUImplE4tickEv+0x144)[0x561f4acac574] >>> >>> ./build/X86/gem5.opt(_ZN10EventQueue10serviceOneEv+0xd9)[0x561f4b455699] >>> >>> ./build/X86/gem5.opt(_Z9doSimLoopP10EventQueue+0x87)[0x561f4b470e77] >>> >>> ./build/X86/gem5.opt(_Z8simulatem+0xcaa)[0x561f4b471eba] >>> >>> ./build/X86/gem5.opt(+0x5b4d4e)[0x561f4aaedd4e] >>> >>> ./build/X86/gem5.opt(+0x591bf4)[0x561f4aacabf4] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x64d7)[0x7f2546995697] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7f2546ac7278] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf6)[0x7f2546994db6] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7f2546ac7278] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf6)[0x7f2546994db6] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7f2546ac7278] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x5bf6)[0x7f2546994db6] >>> >>> >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7d8)[0x7f2546ac7278] >>> >>> --- END LIBC BACKTRACE --- >>> >>> Aborted (core dumped) >>> """""""" >>> >>> When I tried to use AtomicCPU for boot up by fast forwarding it, as soon >>> as its fast forwarded, simulations get killed with the message shown below: >>> >>> >>> """ >>> >>> Switched CPUS @ tick 7034903342000 >>> >>> switching cpus >>> >>> warn: ClockedObject: Already in the requested power state, request >>> ignored >>> >>> **** REAL SIMULATION **** >>> >>> info: Entering event queue @ 7034903342000. Starting simulation... >>> >>> *Killed* >>> >>> """""" >>> >>> >>> I see this message using m5term "*Connection closed by foreign host*." >>> >>> >>> I can run parsec v2.1 using their image " >>> http://www.cs.utexas.edu/~cart/parsec_m5/" and gem5's old kernel using >>> x86 03CPU and Fast forwarding. >>> >>> >>> I want to run some benchmarks which require FS mode of x86, so I >>> developed new image and kernel and it works correctly for AtomicSimpleCPU >>> and TimingSimpleCPU. >>> >>> >>> I also used gdb tool with O3CPU to see what actually happens, gdb output >>> is as shown below: >>> >>> (gdb) bt >>> >>> #0 __GI_raise (sig=sig@entry=6) at >>> ../sysdeps/unix/sysv/linux/raise.c:51 >>> >>> #1 0x00007ffff5d74801 in __GI_abort () at abort.c:79 >>> >>> #2 0x00007ffff5d6439a in __assert_fail_base (fmt=0x7ffff5eeb7d8 >>> "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", >>> assertion=assertion@entry=0x555556ab2728 >>> "flags.isSet(STATIC_DATA|DYNAMIC_DATA)", >>> >>> file=file@entry=0x555556ab22b7 "build/X86/mem/packet.hh", >>> line=line@entry=1047, function=function@entry=0x555556adf560 >>> <_ZZN6Packet6getPtrIhEEPT_vE19__PRETTY_FUNCTION__> "T* Packet::getPtr() >>> [with T = unsigned char]") >>> >>> at assert.c:92 >>> >>> #3 0x00007ffff5d64412 in __GI___assert_fail >>> (assertion=assertion@entry=0x555556ab2728 >>> "flags.isSet(STATIC_DATA|DYNAMIC_DATA)", file=file@entry=0x555556ab22b7 >>> "build/X86/mem/packet.hh", line=line@entry=1047, >>> >>> function=function@entry=0x555556adf560 >>> <_ZZN6Packet6getPtrIhEEPT_vE19__PRETTY_FUNCTION__> "T* Packet::getPtr() >>> [with T = unsigned char]") at assert.c:101 >>> >>> #4 0x0000555555d0317c in Packet::getPtr<unsigned char> >>> (this=0x55555843cb00) at build/X86/mem/packet.hh:1047 >>> >>> #5 Packet::setData (p=0x7fffffffbe40 "", this=0x55555843cb00) at >>> build/X86/mem/packet.hh:1134 >>> >>> #6 X86ISA::handleIprRead (pkt=<optimized out>, xc=<optimized out>) at >>> build/X86/arch/x86/mmapped_ipr.hh:69 >>> >>> #7 LSQ<O3CPUImpl>::SplitDataRequest::handleIprRead (this=<optimized >>> out>, thread=<optimized out>, mainPkt=<optimized out>) at >>> build/X86/cpu/o3/lsq_impl.hh:1105 >>> >>> #8 0x0000555555cc3781 in LSQUnit<O3CPUImpl>::read >>> (this=0x555557fae160, req=0x555557aaf980, load_idx=19) at >>> build/X86/cpu/o3/lsq_unit.hh:667 >>> >>> #9 0x0000555555d0975d in LSQ<O3CPUImpl>::read (this=0x555558750928, >>> req=req@entry=0x555557aaf980, load_idx=19) at >>> build/X86/cpu/o3/lsq.hh:1035 >>> >>> #10 0x0000555555d09cf3 in FullO3CPU<O3CPUImpl>::read >>> (load_idx=<optimized out>, req=0x555557aaf980, this=<optimized out>) at >>> build/X86/cpu/o3/cpu.hh:805 >>> >>> #11 LSQ<O3CPUImpl>::pushRequest (this=this@entry=0x555558750928, >>> inst=..., isLoad=isLoad@entry=true, data=data@entry=0x0, >>> size=<optimized out>, size@entry=8, addr=<optimized out>, flags=..., >>> res=0x0, amo_op=0x0) >>> >>> at build/X86/cpu/o3/lsq_impl.hh:755 >>> >>> #12 0x0000555555ca7b3b in FullO3CPU<O3CPUImpl>::pushRequest (amo_op=0x0, >>> res=0x0, flags=..., addr=94489281536, size=8, data=0x0, isLoad=true, >>> inst=..., this=0x55555874e000) at build/X86/cpu/o3/cpu.hh:799 >>> >>> #13 BaseDynInst<O3CPUImpl>::initiateMemRead (this=<optimized out>, >>> addr=94489281536, size=8, flags=...) at build/X86/cpu/base_dyn_inst.hh:913 >>> >>> #14 0x00005555569b9521 in X86ISA::initiateMemRead (traceData=<optimized >>> out>, flags=..., dataSize=<optimized out>, addr=<optimized out>, >>> xc=0x55555b262680) at build/X86/arch/x86/memhelpers.hh:50 >>> >>> #15 X86ISAInst::LdBig::initiateAcc (this=0x55555b25d440, >>> xc=0x55555b262680, traceData=<optimized out>) at >>> build/X86/arch/x86/generated/exec-ns.cc.inc:19256 >>> >>> #16 0x0000555555cdac15 in BaseO3DynInst<O3CPUImpl>::initiateAcc >>> (this=0x55555b262680) at build/X86/cpu/o3/dyn_inst_impl.hh:156 >>> >>> #17 0x0000555555d137e7 in LSQUnit<O3CPUImpl>::executeLoad >>> (this=0x555557fae160, inst=...) at build/X86/cpu/o3/lsq_unit_impl.hh:543 >>> >>> #18 0x0000555555d03a0b in LSQ<O3CPUImpl>::executeLoad >>> (this=this@entry=0x555558750928, >>> inst=...) at build/X86/cpu/o3/lsq_impl.hh:252 >>> >>> #19 0x0000555555cf1e96 in DefaultIEW<O3CPUImpl>::executeInsts >>> (this=this@entry=0x55555874f2f0) at build/X86/cpu/o3/iew_impl.hh:1283 >>> >>> #20 0x0000555555cf59a0 in DefaultIEW<O3CPUImpl>::tick >>> (this=this@entry=0x55555874f2f0) >>> at build/X86/cpu/o3/iew_impl.hh:1523 >>> >>> #21 0x0000555555cc7574 in FullO3CPU<O3CPUImpl>::tick >>> (this=0x55555874e000) at build/X86/cpu/o3/cpu.cc:603 >>> >>> #22 0x0000555556470699 in std::function<void ()>::operator()() const >>> (this=0x55555874e2f0) at /usr/include/c++/7/bits/std_function.h:706 >>> >>> #23 EventFunctionWrapper::process (this=0x55555874e2b8) at >>> build/X86/sim/eventq.hh:836 >>> >>> #24 EventQueue::serviceOne (this=this@entry=0x555557ecce40) at >>> build/X86/sim/eventq.cc:228 >>> >>> #25 0x000055555648be77 in doSimLoop (eventq=0x555557ecce40) at >>> build/X86/sim/simulate.cc:219 >>> >>> #26 0x000055555648ceba in simulate (num_cycles=<optimized out>) at >>> build/X86/sim/simulate.cc:132 >>> >>> #27 0x0000555555b08d4e in pybind11::detail::argument_loader<unsigned >>> long>::call_impl<GlobalSimLoopExitEvent*, GlobalSimLoopExitEvent* >>> (*&)(unsigned long), 0ul, pybind11::detail::void_type> (f=<optimized out>, >>> >>> >>> this=<optimized out>) at ext/pybind11/include/pybind11/cast.h:1860 >>> >>> #28 pybind11::detail::argument_loader<unsigned >>> long>::call<GlobalSimLoopExitEvent*, pybind11::detail::void_type, >>> GlobalSimLoopExitEvent* (*&)(unsigned long)>(GlobalSimLoopExitEvent* >>> (*&)(unsigned long)) && (f=<optimized out>, >>> >>> this=<optimized out>) at ext/pybind11/include/pybind11/cast.h:1837 >>> >>> #29 void pybind11::cpp_function::initialize<GlobalSimLoopExitEvent* >>> (*&)(unsigned long), GlobalSimLoopExitEvent*, unsigned long, >>> pybind11::name, pybind11::scope, pybind11::sibling, >>> pybind11::arg_v>(GlobalSimLoopExitEvent* (*&)(unsigned long), >>> GlobalSimLoopExitEvent* (*)(unsigned long), pybind11::name const&, >>> pybind11::scope const&, pybind11::sibling const&, pybind11::arg_v >>> const&)::{lambda(pybind11::detail::function_call&)#3}::operator()(pybind11::detail::function_call&) >>> const (call=..., __closure=0x0) at >>> ext/pybind11/include/pybind11/pybind11.h:153 >>> >>> #30 void pybind11::cpp_function::initialize<GlobalSimLoopExitEvent* >>> (*&)(unsigned long), GlobalSimLoopExitEvent*, unsigned long, >>> pybind11::name, pybind11::scope, pybind11::sibling, >>> pybind11::arg_v>(GlobalSimLoopExitEvent* (*&)(unsigned long), >>> GlobalSimLoopExitEvent* (*)(unsigned long), pybind11::name const&, >>> pybind11::scope const&, pybind11::sibling const&, pybind11::arg_v >>> const&)::{lambda(pybind11::detail::function_call&)#3}::_FUN(pybind11::detail::function_call&) >>> () at ext/pybind11/include/pybind11/pybind11.h:131 >>> >>> #31 0x0000555555ae5bf4 in pybind11::cpp_function::dispatcher >>> (self=<optimized out>, args_in=0x7ffff2c14250, kwargs_in=0x7ffff2aed7f8) at >>> ext/pybind11/include/pybind11/pybind11.h:629 >>> >>> #32 0x00007ffff7905697 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #33 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #34 0x00007ffff7904db6 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #35 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #36 0x00007ffff7904db6 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #37 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #38 0x00007ffff7904db6 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #39 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #40 0x00007ffff78ff029 in PyEval_EvalCode () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #41 0x00007ffff7905c80 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #42 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #43 0x00007ffff7904db6 in PyEval_EvalFrameEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #44 0x00007ffff7a37278 in PyEval_EvalCodeEx () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #45 0x00007ffff78ff029 in PyEval_EvalCode () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #46 0x00007ffff79a2546 in PyRun_StringFlags () from >>> /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 >>> >>> #47 0x0000555556479893 in m5Main (argc=<optimized out>, _argv=<optimized >>> out>) at build/X86/sim/init.cc:303 >>> >>> #48 0x00005555559ba738 in main (argc=8, argv=0x7fffffffe358) at >>> build/X86/sim/main.cc:69 >>> >>> >>> >>> So if anyone in the community has been using x86 gem5 FS with O3CPU, let >>> me know if there was a problem in image or kernel or a way I can find >>> solution to this problem. Also, I think its high time we have to share a >>> startup latest image(Ubuntu) and kernel for x86. >>> >>> >>> >>> >>> Best regards, >>> >>> Abhishek >>> _______________________________________________ >>> gem5-users mailing list >>> [email protected] >>> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users >> >> _______________________________________________ >> gem5-users mailing list >> [email protected] >> http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users > > _______________________________________________ > gem5-users mailing list > [email protected] > http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users -- Pouya Fotouhi PhD Candidate Department of Electrical and Computer Engineering University of California, Davis
_______________________________________________ gem5-users mailing list [email protected] http://m5sim.org/cgi-bin/mailman/listinfo/gem5-users
