Hi,
Thanks a lot.


On Tue, Dec 22, 2020 at 7:53 AM Ayaz Akram <[email protected]> wrote:

> Hi,
>
>
>> does this mean that I have gone the right way and  do I  not need to
>> specify  any arguments or  input(ref,train) to run the "spec cpu 2006"
>> on gem5-fullsystem like what is said in the file  "speccmds.cmd" that is
>> in "
>> /home/farideh/mnt/benchspec/CPU2006/401.bzip2/run/run_base_ref_gcc43-64bit.0000
>> "?
>
>
>  That depends on what input you intend to run bzip with. "speccmds.cmd"
> contains all commands to run a particular benchmark with a specific input.
> You can use a command from that file to run the benchmark+input combination
> you want to run (e.g. to run bzip with chicken.jpg, you will have to pass 
> "chicken.jpg
> 30"  as arguments to the bzip binary).
>
> what does these mean  "-E , -c , -o" in the file  speccmds.cmd?
>
>
> -e, -o are used to redirect the stdout and stderr of your benchmark run to
> particular files.
>
>  should I use 6 input( input.source , chicken.jpg , liberty.jpg ,
>> input.program , text.html , input.combined ) for running bzip2 on
>> gem5-fullsystem-arm or just use  input.combined for input of  bzip2?
>
>
> I think this really depends on what you are trying to study. Usually in
> papers, when authors present their data, they will mention the
> benchmark+input combination. Moreover, from SPEC's website:
>
> "401.bzip2's reference workload has six components: two small JPEG
> images, a program binary, some program source code in a tar file, an HTML
> file, and a "combined" file, which is representative of an archive that
> contains both highly compressible and not very compressible files."
>
> So you can pick an input which suits your experiments (or if you do not
> care, maybe the combined file makes the most sense).
>
> When I ran 401.bzip2 ,it finished after 10days.  I need to  know between
>> "429.mcf, 445.gobmk, 
>> 456.hmmer,458.sjeng,462.libquantum,473.astar,483.xalancbmk
>> and 998.specrand"",Which one runs in 10 short days?
>
>
> I don't really remember the difference in execution times of these
> benchmarks (I think mcf, gobmk and sjeng will be faster than others, also
> it depends on which inputs are you using).  I will suggest that you run
> these benchmarks on real hardware and see the difference in their execution
> times (you should see similar behavior on gem5 as well).
>
>
> and Is it not problem , if I use 4cores and cpu-type=DerivO3CPU for
>> running "spec cpu 2006" on gem5-fullsystem ?
>
>
> Running a complete benchmark might be too slow with DerivO3CPU. You can
> either use smaller inputs or run your benchmark for a smaller number of
> instructions. Moreover, I don't think 4 cores make sense with spec cpu 2006
> benchmarks as they are single threaded workloads (obviously it also depends
> on what are you trying to study).
>
> For the last question, if I use sript file for running  bzip2 on
>> gem5-fullsystem   the following command, is it correct?
>
>
> Yes, that looks correct to me (assuming that the benchmark paths are
> correct).
>
> -Ayaz
>
> On Sun, Dec 20, 2020 at 8:01 AM FARIDEH ZIAEE <[email protected]>
> wrote:
>
>> Hi
>> Thanks.
>>
>>
>> According to the SPEC website, I built  and ran "spec cpu 2006"  for "ref
>> and test input" by useing  cross-compiling and  qemu to chroot to an arm
>> linux image then I have traid to run  "spec cpu 2006" on
>> gem5-fullsystem-arm.
>>
>> and you said "As far as I remember bzip binary inside run folder (the
>> one you referred to above) uses "data/all/input/input.combined" file  by
>> default and the output you are seeing definitely shows that bzip ran with
>> input.combined."
>> ,does this mean that I have gone the right way and  do I  not need to
>> specify  any arguments or  input(ref,train) to run the "spec cpu 2006"
>> on gem5-fullsystem like what is said in the file  "speccmds.cmd" that is
>> in "
>> /home/farideh/mnt/benchspec/CPU2006/401.bzip2/run/run_base_ref_gcc43-64bit.0000
>> "?
>>   the file  speccmds.cmd ::
>>
>> ""-C
>> /home/farideh/mnt/benchspec/CPU2006/401.bzip2/run/run_base_ref_gcc43-64bit.0000
>> -o input.source.out -e input.source.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit input.source 280
>> -o chicken.jpg.out -e chicken.jpg.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit chicken.jpg 30
>> -o liberty.jpg.out -e liberty.jpg.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit liberty.jpg 30
>>
>>
>> -o input.program.out -e input.program.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit input.program 280
>> -o text.html.out -e text.html.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit text.html 280
>> -o input.combined.out -e input.combined.err
>> ../run_base_ref_gcc43-64bit.0000/bzip2_base.gcc43-64bit input.combined 200""
>>
>> what does these mean  "-E , -c , -o" in the file  speccmds.cmd?
>>
>> ///////////////////////////////
>>
>> According to the file ""speccmds.cmd""  in "
>> cpu2006/benchspec/CPU2006/401.bzip2/run/ run_base_ref_gcc43-64bit.0000", the
>> bzip2  built with  6 input( input.source , chicken.jpg , liberty.jpg ,
>> input.program , text.html , input.combined )  , should I use 6 input(
>> input.source , chicken.jpg , liberty.jpg , input.program , text.html ,
>> input.combined ) for running bzip2 on gem5-fullsystem-arm or just use
>> input.combined for input of  bzip2?
>>
>>   /////////////////
>>
>> What arguments are usually used to implement the "spec cpu 2006" on
>> gem5-fullsysytem and how should they be used?
>>
>>
>> When I ran 401.bzip2 ,it finished after 10days.  I need to  know between
>> "429.mcf, 445.gobmk, 
>> 456.hmmer,458.sjeng,462.libquantum,473.astar,483.xalancbmk
>> and 998.specrand"",Which one runs in 10 short days?
>>
>> /////////////
>>
>> and Is it not problem , if I use 4cores and cpu-type=DerivO3CPU for
>> running "spec cpu 2006" on gem5-fullsystem ?
>>
>>
>> For the last question, if I use sript file for running  bzip2 on
>> gem5-fullsystem   the following command, is it correct?
>>
>>
>>
>> #!/bin/sh
>> cd /cpu2006/benchspec/CPU2006/401.bzip2/run/ run_base_ref_gcc43-64bit.0000
>> /sbin/m5 resetstats
>> /cpu2006/benchspec/CPU2006/401.bzip2/run/ run_base_ref_gcc43-64bit.0000
>> /bzip2_base.gcc43-64bit   input.combined  200  >  input.combined.out  2 >
>> input.combined.err
>> /sbin/m5 exit
>>
>>
>> Best regards.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> On Sun, Dec 20, 2020 at 1:16 PM Ayaz Akram <[email protected]> wrote:
>>
>>> Hi,
>>>
>>> The output you are seeing indicates a successful bzip run. As far as I
>>> remember bzip binary inside run folder (the one you referred to above) uses
>>> "data/all/input/input.combined" file  by default and the output you are
>>> seeing definitely shows that bzip ran with input.combined. If you want to
>>> use a different input you can pass that as an argument to bzip. Having said
>>> that, I think it is generally better to run spec workloads using runspec
>>> tool. I think you can find more information on how to do it on SPEC website.
>>>
>>> -Ayaz
>>>
>>
_______________________________________________
gem5-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s

Reply via email to