Hi Jason:
I have tested that bootup KVM CPU with 32GB memsize in fs mode is ok,
so the problem maybe in se mode.
发件人: Liyichao
发送时间: 2021年5月13日 9:26
收件人: 'Jason Lowe-Power' <[email protected]>
抄送: gem5 users mailing list <[email protected]>; linyue <[email protected]>
主题: 答复: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
Thank you, Jason.
I think the script you offered is used to bootup full-system, have you
tested the KVM with X86 on system-call mode with more than 4GB memsize using
gem5 v21.0.0.0(master)?
发件人: Jason Lowe-Power [mailto:[email protected]]
发送时间: 2021年5月13日 0:43
收件人: Liyichao <[email protected]<mailto:[email protected]>>
抄送: gem5 users mailing list <[email protected]<mailto:[email protected]>>
主题: Re: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
Hmm... That's interesting. It could have something to do with the I/O hole for
x86 at 3-4GB. This is a huge pain for gem5's config scripts. We hack around
this in our config scripts (e.g., for gem5-resources). See
https://gem5.googlesource.com/public/gem5-resources/+/refs/heads/stable/src/npb/configs/system/system.py#59
for an example.
Those scripts have been tested with 8 cores and more than 4GB of memory (maybe
64G?). We may also have run it with 32 cores, but I'm not sure if that has been
tested recently.
Cheers,
Jason
On Tue, May 11, 2021 at 8:03 PM Liyichao
<[email protected]<mailto:[email protected]>> wrote:
Hi Jason:
I find that if I set –mem-size < 4GB, there is no error, but when I
set –mem-size=4GB or more than 4GB, the error occurred.
发件人: Liyichao
发送时间: 2021年5月12日 0:26
收件人: Jason Lowe-Power <[email protected]<mailto:[email protected]>>
抄送: gem5 users mailing list <[email protected]<mailto:[email protected]>>
主题: RE: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
Hi Jason:
I make two tests:
1. I write a test code follow "open /dev/kvm” "create vm” "create vcpu”,it
has no error;
2. I put allocate pmem and create vcpu in create_vm function in gem5,not
outside create_vm,it has no error.
so I suspect if the allocate pmem function in gem5 source has any wrongs?
发件人: Jason Lowe-Power<[email protected]<mailto:[email protected]>>
收件人: Liyichao<[email protected]<mailto:[email protected]>>
抄送: gem5 users mailing list<[email protected]<mailto:[email protected]>>
主题: Re: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
时间: 2021-05-11 22:47:19
Hello,
I wonder if you have a maximum number of vcpus set on your host system.
Otherwise, I can't think of any specific limitation to creating vcpus.
Cheers,
Jason
On Tue, May 11, 2021 at 2:36 AM Liyichao
<[email protected]<mailto:[email protected]>> wrote:
Hi Jason:
I use strace to follow the call stack, I find that the ioctl() with
KVM_CREATE_VCPU returned EEXIST errno, this means the vCPU exist.
ioctl(5, KVM_CREATE_VCPU, 2) = -1 EEXIST (File exists)
发件人: Liyichao
发送时间: 2021年5月11日 12:54
收件人: 'Jason Lowe-Power' <[email protected]<mailto:[email protected]>>; gem5
users mailing list <[email protected]<mailto:[email protected]>>
主题: 答复: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
Hi Jason:
I have add a DPRINTF in line 559 of vm.cc , it showed “ 0:
system.kvm_vm: *************debug vcpuID is 0”
Any KVM use limitations in X86?
gem5 version 21.0.0.0
gem5 compiled May 11 2021 01:04:20
gem5 started May 11 2021 01:09:26
gem5 executing on ubuntu, pid 53534
command line: ./build/X86/gem5.opt --debug-flags=Kvm configs/example/se.py
--cpu-type=X86KvmCPU --cpu-clock=2.6GHz --sys-clock=2.6GHz --caches
--l1d_size=64kB --l1i_size=64kB --l2cache --l2_size=32MB --mem-size=32GB
--num-cpus=1 -I 5000 -c ./test
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: membus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
Global frequency set at 1000000000000 ticks per second
warn: DRAM device capacity (8192 Mbytes) does not match the address range
assigned (32768 Mbytes)
0: system.cpu: vcpuID is 0
0: system.remote_gdb: listening for remote gdb on port 7000
0: system.cpu: ActivateContext 0
**** REAL SIMULATION ****
0: system.kvm_vm: Mapping 1 memory region(s)
0: system.kvm_vm: Mapping region: 0x0x7f0b007b7000 -> 0x0 [size:
0x800000000]
0: system.kvm_vm: vmFD is 5, p1 is 140724538190576
0: system.cpu: charlie, vcpuID is 0
0: system.kvm_vm: vmFD is 5, p1 is 0
0: system.kvm_vm: *************debug vcpuID is 0
panic: KVM: Failed to create virtual CPU
Memory Usage: 33838804 KBytes
Program aborted at tick 0
--- BEGIN LIBC BACKTRACE ---
./build/X86/gem5.opt(_Z15print_backtracev+0x2c)[0x5622a4c15f8c]
./build/X86/gem5.opt(_Z12abortHandleri+0x4a)[0x5622a4c30b6a]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x12980)[0x7f1305ea6980]
/lib/x86_64-linux-gnu/libc.so.6(gsignal+0xc7)[0x7f1304430fb7]
/lib/x86_64-linux-gnu/libc.so.6(abort+0x141)[0x7f1304432921]
./build/X86/gem5.opt(+0x6e5cef)[0x5622a3f20cef]
./build/X86/gem5.opt(_ZN5KvmVM10createVCPUEl+0x9ff)[0x5622a4953b8f]
./build/X86/gem5.opt(_ZN10BaseKvmCPU7startupEv+0x9e)[0x5622a494bc8e]
./build/X86/gem5.opt(_ZN9X86KvmCPU7startupEv+0x9)[0x5622a4969509]
________________________________
发件人: Jason Lowe-Power [mailto:[email protected]]
发送时间: 2021年5月10日 23:56
收件人: gem5 users mailing list <[email protected]<mailto:[email protected]>>
抄送: Liyichao <[email protected]<mailto:[email protected]>>
主题: Re: [gem5-users] Fail to bootup with KVM in se.py on X86 arch
Hmm, I don't immediately know what's going wrong. I would extend the panic on
line 559 of vm.cc to also print the error code number so you can look it up. I
believe you can use `errno` like normal after calling `ioctl`. For instance,
you could add `strerror(errno)` to the panic.
Cheers,
Jason
On Mon, May 10, 2021 at 12:49 AM Liyichao via gem5-users
<[email protected]<mailto:[email protected]>> wrote:
Hi All:
I use KVM CPU in se mode on X86 arch, but it showed a panic “KVM:
Failed to create virtual CPU”.
My host is X86 server of Intel 6148 and it can support kvm:
lsmod |grep kvm
kvm_intel 172032 0
kvm 548864 1 kvm_intel
irqbypass 16384 1 kvm
ll /dev/kvm
crwxrwxrwx 1 root root 10, 232 Feb 16 20:40 /dev/kvm
My GEM5 version is master(v21.0.0.0),
ea7d012c00e5555857ef999b88a8ec2bde801a1f
./build/X86/gem5.opt configs/example/se.py --cpu-type=X86KvmCPU
--cpu-clock=2.6GHz --sys-clock=2.6GHz --caches --l1d_size=64kB --l1i_size=64kB
--l2cache --l2_size=32MB --mem-size=32GB --num-cpus=1 -I 5000 -c "./test"
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
gem5 version 21.0.0.0
gem5 compiled May 10 2021 03:39:51
gem5 started May 10 2021 03:57:48
gem5 executing on ubuntu, pid 112188
command line: ./build/X86/gem5.opt configs/example/se.py --cpu-type=X86KvmCPU
--cpu-clock=2.6GHz --sys-clock=2.6GHz --caches --l1d_size=64kB --l1i_size=64kB
--l2cache --l2_size=32MB --mem-size=32GB --num-cpus=1 -I 5000 -c ./test
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: tol2bus.slave is deprecated. `slave` is now called `cpu_side_ports`
warn: membus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.master is deprecated. `master` is now called `mem_side_ports`
warn: membus.slave is deprecated. `slave` is now called `cpu_side_ports`
Global frequency set at 1000000000000 ticks per second
warn: DRAM device capacity (8192 Mbytes) does not match the address range
assigned (32768 Mbytes)
0: system.remote_gdb: listening for remote gdb on port 7000
**** REAL SIMULATION ****
panic: KVM: Failed to create virtual CPU
_______________________________________________
gem5-users mailing list -- [email protected]<mailto:[email protected]>
To unsubscribe send an email to
[email protected]<mailto:[email protected]>
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________
gem5-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s