Hi Ali thanks for your answer, it says that it could not find the file
loading script...
/tmp/script: line 1: /benchmarks/micros/MyHello
: No such file or directory
usage: m5 ivlb <interval>
m5 ivle <interval>
m5 initparam
I have review again the img and the file is there, I have the disk
image in a folder called home/m5-fs/disks and the simulator in
home/mt-fullsystem, I can run the other benchmarks right but not mine.
Thanks.
On 11/20/08, Ali Saidi <[EMAIL PROTECTED]> wrote:
> What is in the *.terminal files that have been created?
>
> Ali
>
> On Nov 20, 2008, at 12:42 PM, Eduardo Olmedo Sanchez wrote:
>
>> Hello again, I am having some problems with the execution of a simple
>> Hello World program in FS, I have been executing the program 20
>> minutes and I do not get the output so I believe that something is
>> going wrong. This is what I did I copied a HelloWorld program that
>> works in SE mode to /benchmarks/micros/MyHello and after in
>> /configs/boot I created a file called micro_MyHello.rcS and on it I
>> write the following:
>>
>> -- micro_MyHello.rcs
>> /benchmarks/micros/MyHello
>> m5 exit
>>
>> For the execution, in the file Benchmarks.py I added my own benchmark
>>
>> Benchmarks = {
>> ....
>> 'MyHello': [SysConfig('micro_MyHello.rcS'),
>> SysConfig('micro_MyHello.rcS')],
>> ....
>>
>> }
>>
>> And finally in the command line I wrote ./build/ALPHA_FS/m5.opt
>> configs/example/fs.py -b MyHello, I have been executing the program 20
>> minutes and I do not get any output in the configuration file I added
>> the option test_sys.cpu[i].progress_interval = 100000 , and this is
>> an example of the output that I get
>>
>> 873639550000000: Event_137: testsys.cpu progress event, instructions
>> committed: 0, IPC: 0
>> 873639600000000: Event_137: testsys.cpu progress event, instructions
>> committed: 0, IPC: 0
>> 873639650000000: Event_137: testsys.cpu progress event, instructions
>> committed: 1471, IPC: 0.01471
>> 873639700000000: Event_137: testsys.cpu progress event, instructions
>> committed: 0, IPC: 0
>> 873639750000000: Event_137: testsys.cpu progress event, instructions
>> committed: 0, IPC: 0
>> 873639800000000: Event_137: testsys.cpu progress event, instructions
>> committed: 0, IPC: 0
>>
>> As you can see I get sometimes that the instructions commited are 0,
>> so I guess that something is going wrong, any ideas?, thank you.
>>
>>
>> On Wed, Nov 19, 2008 at 1:44 PM, Lisa Hsu <[EMAIL PROTECTED]> wrote:
>>> Basically, yes. If you are just copying your files to the disk
>>> image we
>>> provided, and you don't change the name of the image, then you
>>> don't need to
>>> change anything in the config scripts. You'd just need to make rcS
>>> scripts
>>> to do what you want with the files you added.
>>>
>>> Lisa
>>>
>>> On Wed, Nov 19, 2008 at 4:38 PM, Eduardo Olmedo Sanchez
>>> <[EMAIL PROTECTED]
>>> >
>>> wrote:
>>>>
>>>> Hi Lisa thanks for your answer, so do you mean that I should mount
>>>> your img file linux-latest.img then I add my own benchmarks to that
>>>> img and after I copy the img to the simulator and change the python
>>>> configuration file to point to the img and cross the fingers to
>>>> see if
>>>> everything is right?. Thanks.
>>>>
>>>> On Wed, Nov 19, 2008 at 1:10 PM, Lisa Hsu <[EMAIL PROTECTED]>
>>>> wrote:
>>>>> Try this:
>>>>>
>>>>>
>>>>> http://m5sim.org/wiki/index.php/Frequently_Asked_Questions#OS.2FLinux_Related
>>>>>
>>>>> That should help you add files to an image - you can just start
>>>>> with the
>>>>> one
>>>>> we distribute.
>>>>>
>>>>> Lisa
>>>>>
>>>>> On Wed, Nov 19, 2008 at 4:05 PM, Eduardo Olmedo Sanchez
>>>>> <[EMAIL PROTECTED]>
>>>>> wrote:
>>>>>>
>>>>>> Hi I have been able to run knoppix on vmware, but I still do not
>>>>>> get
>>>>>> what I have to do, do I need to do all the procedure from here
>>>>>>
>>>>>>
>>>>>> http://www.m5sim.org/wiki/index.php/Using_linux-dist_to_Create_Disk_Images_and_Kernels_for_M5
>>>>>> to create the disk image?, or how can I use an existing disk
>>>>>> image to
>>>>>> add my own benchmarks and after run then in the simulator?.
>>>>>> Thank andd
>>>>>> sorry for bother you with my simple questions.
>>>>>>
>>>>>> On Tue, Nov 18, 2008 at 5:30 PM, <[EMAIL PROTECTED]> wrote:
>>>>>>> Gentoo stage 3 install CDs are fairly minimal but reliable live
>>>>>>> CDs.
>>>>>>> I've heard
>>>>>>> they work well.
>>>>>>>
>>>>>>> Gabe
>>>>>>>
>>>>>>> Quoting Bob Nagel <[EMAIL PROTECTED]>:
>>>>>>>
>>>>>>>> Hello,
>>>>>>>>
>>>>>>>> I have been using some virtual machine environments, but I
>>>>>>>> have not
>>>>>>>> found what I need, usually the only disk images that I found are
>>>>>>>> with
>>>>>>>> complete linux environments that includes applications and user
>>>>>>>> interface. So Clint or anyone can you tell me where I can get
>>>>>>>> a disk
>>>>>>>> image with a simple linux on it without user interface and that
>>>>>>>> stuff?. thanks so much.
>>>>>>>>
>>>>>>>> 2008/11/13 Eduardo Olmedo Sanchez <[EMAIL PROTECTED]>:
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> I have installed bochs and now I have dllinux running and it
>>>>>>>>> using
>>>>>>>>> as
>>>>>>>>> hard disk a file called hd10meg.img, the kernel is 1.3.89. So
>>>>>>>>> the
>>>>>>>>> procedure that I should is: add my binary to the hd10meg.img
>>>>>>>>> and
>>>>>>>>> after
>>>>>>>>> move the img to the simulator. Where should I put the binary in
>>>>>>>>> the
>>>>>>>>> img? and Should I use another Linux with a 2.5 kernel?. Sorry
>>>>>>>>> for
>>>>>>>>> bother you with this simple questions, but my Linux
>>>>>>>>> experience is
>>>>>>>>> not
>>>>>>>>> very high. Thank you.
>>>>>>>>>
>>>>>>>>> On Wed, Nov 12, 2008 at 3:36 PM, Clint Smullen
>>>>>>>>> <[EMAIL PROTECTED]>
>>>>>>>> wrote:
>>>>>>>>>> It is much easier to mount the existing disk image, than to
>>>>>>>>>> make
>>>>>>>>>> a
>>>>>>>>>> new
>>>>>>>>>> one, unless you are adding an addition disk to the
>>>>>>>>>> configuration.
>>>>>>>>>> After you have done the mount command (which you may have to
>>>>>>>>>> prefix
>>>>>>>>>> with sudo, depending on your flavor of Linux), you then need
>>>>>>>>>> to
>>>>>>>>>> copy
>>>>>>>>>> the files to the mount point, verify the permissions and
>>>>>>>>>> ownership
>>>>>>>>>> (I
>>>>>>>>>> make all the files I copy onto the disk have root ownership
>>>>>>>>>> and
>>>>>>>>>> group), and then umount it with (sudo) umount /mount/point.
>>>>>>>>>>
>>>>>>>>>> You will still need vmlinux, as that is loaded separately from
>>>>>>>>>> the
>>>>>>>>>> disk image.
>>>>>>>>>>
>>>>>>>>>> - Clint
>>>>>>>>>>
>>>>>>>>>> On Nov 12, 2008, at 6:18 PM, Bob Nagel wrote:
>>>>>>>>>>
>>>>>>>>>>> Thanks for your answer Clint, I know how to move the files,
>>>>>>>>>>> so
>>>>>>>>>>> the
>>>>>>>>>>> thing that I should do is:
>>>>>>>>>>>
>>>>>>>>>>> - Follow the steps from here Using linux-dist to Create Disk
>>>>>>>>>>> Images
>>>>>>>>>>> and Kernels for M5 to create my disk image
>>>>>>>>>>> - Add the binaries using this commnad /bin/mount -o
>>>>>>>>>>> loop,offset=32256
>>>>>>>>>>> /z/foo.img /mount/point
>>>>>>>>>>> - Submit the image and point the configuration py file to the
>>>>>>>>>>> image
>>>>>>>>>>> file
>>>>>>>>>>>
>>>>>>>>>>> To run the simulation do I still need to install the
>>>>>>>>>>> vmlinux in
>>>>>>>>>>> the
>>>>>>>>>>> machine that is running the simulation?. Thank you so much
>>>>>>>>>>> for
>>>>>>>>>>> your
>>>>>>>>>>> help.
>>>>>>>>>>>
>>>>>>>>>>> 2008/11/12 Clint Smullen <[EMAIL PROTECTED]>
>>>>>>>>>>>>
>>>>>>>>>>>> If you install Linux into a virtual machine (Bochs,
>>>>>>>>>>>> VirtualPC,
>>>>>>>>>>>> VMWare, etc.), you will have root privilege and will be
>>>>>>>>>>>> able to
>>>>>>>>>>>> mount the disk image within the virtual machine to make
>>>>>>>>>>>> changes
>>>>>>>>>>>> (albeit using sudo mount ...). I move the disk images around
>>>>>>>>>>>> using
>>>>>>>>>>>> scp, which performs file transfers through a SSH session. If
>>>>>>>>>>>> you
>>>>>>>>>>>> have SSH access to the server that M5 is running on, then
>>>>>>>>>>>> this
>>>>>>>>>>>> is
>>>>>>>>>>>> the simplest way of getting it working. If you happen to
>>>>>>>>>>>> have a
>>>>>>>>>>>> real Linux machine which you have root privilege on, you
>>>>>>>>>>>> can do
>>>>>>>>>>>> the
>>>>>>>>>>>> same procedure to get the files moved. Other methods for
>>>>>>>>>>>> copying
>>>>>>>>>>>> the files would be FTP, SMB, or any other method that you
>>>>>>>>>>>> normally
>>>>>>>>>>>> use for copying files onto and off of that machines access.
>>>>>>>>>>>> - Clint
>>>>>>>>>>>>
>>>>>>>>>>>> On Nov 12, 2008, at 5:20 PM, Bob Nagel wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi Ali thanks for your answer, I do not know what you
>>>>>>>>>>>> mean. Are
>>>>>>>>>>>> you
>>>>>>>>>>>> saying that I should create the Disk Image in another
>>>>>>>>>>>> machine
>>>>>>>>>>>> in
>>>>>>>>>>>> which I have root privileges? and after how do I submit that
>>>>>>>>>>>> disk
>>>>>>>>>>>> image to the machine in which I have m5 installed?, I should
>>>>>>>>>>>> run
>>>>>>>>>>>> the simulation in that machine because it is much faster
>>>>>>>>>>>> than
>>>>>>>>>>>> mine.
>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>
>>>>>>>>>>>> 2008/11/12 Ali Saidi <[EMAIL PROTECTED]>
>>>>>>>>>>>>>
>>>>>>>>>>>>> No, you don't need to have root privileges on the machine
>>>>>>>>>>>>> that
>>>>>>>>>>>>> you're
>>>>>>>>>>>>> running M5 on, but you do need them on some system
>>>>>>>>>>>>> because the
>>>>>>>>>>>>> mount
>>>>>>>>>>>>> requires root privileges. You could run linux inside a VM
>>>>>>>>>>>>> or
>>>>>>>>>>>>> with
>>>>>>>>>>>>> a
>>>>>>>>>>>>> emulator such as Bochs for this purpose.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ali
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Nov 12, 2008, at 3:44 PM, Bob Nagel wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I want to run some of my own tests in FS mode, and I have
>>>>>>>>>>>>>> seen
>>>>>>>>>>>>>> here
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> http://www.m5sim.org/wiki/index.php/Using_linux-dist_to_Create_Disk_Images_and_Kernels_for_M5
>>>>>>>>>>>>>> , that to create the disk image and to add files to it I
>>>>>>>>>>>>>> need
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> have root privileges. Is there any way to avoid this?,
>>>>>>>>>>>>>> I am
>>>>>>>>>>>>>> able
>>>>>>>>>>>>>> to
>>>>>>>>>>>>>> run the benchmarks that comes with the installation of
>>>>>>>>>>>>>> FS, is
>>>>>>>>>>>>>> there
>>>>>>>>>>>>>> any way to add my binaries to that disk image. Thank you
>>>>>>>>>>>>>> so
>>>>>>>>>>>>>> much.
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> m5-users mailing list
>>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> m5-users mailing list
>>>>>>>>>>>>> [email protected]
>>>>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> m5-users mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> m5-users mailing list
>>>>>>>>>>>> [email protected]
>>>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> m5-users mailing list
>>>>>>>>>>> [email protected]
>>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>>> m5-users mailing list
>>>>>>>>>> [email protected]
>>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> m5-users mailing list
>>>>>>>>> [email protected]
>>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> m5-users mailing list
>>>>>>>> [email protected]
>>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> m5-users mailing list
>>>>>>> [email protected]
>>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>>
>>>>>> _______________________________________________
>>>>>> m5-users mailing list
>>>>>> [email protected]
>>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> m5-users mailing list
>>>>> [email protected]
>>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>>
>>>> _______________________________________________
>>>> m5-users mailing list
>>>> [email protected]
>>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> m5-users mailing list
>>> [email protected]
>>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>>
>> _______________________________________________
>> m5-users mailing list
>> [email protected]
>> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>>
>
> _______________________________________________
> m5-users mailing list
> [email protected]
> http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
>
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
