Hi all,
I am currently trying to simulate a small network consisting of 5 ~6
computer systems. The "fs.py" gives an example to build a basic
server-client system with 2 computers. As a start point, I tried to follow
its way to build a network with a server and 2 clients, so I did the
following:
adding three NICs to the test system:
ethernet0 = NSGigE(pci_bus=0, pci_dev=1, pci_func=0)
ethernet1 = NSGigE(pci_bus=0, pci_dev=2, pci_func=0)
modifying the "makeDualRoot" function to make it containing two clients,
namely "drivesys0" and "drivesys1"
in the "Benchmark.py", I add an option for this system, e.g.,
"Surge_multiclient = [Sysconfig(surver), Sysconfig(client),
Sysconfig(client)]".
When running with "--benchmark=Surge_multiclient", the simulation will
exit with a segmentation fault as soon as it enters the "REAL SIMULATION"
mode. Since I am a newbie to M5 simulator, I have no idea on how to fix it.
I am not sure if I did this correctly, so could anyone kindly give me some
suggestions on this issue? I mean building a small network with more than 2
computers.
Another question is that how I can simulate a ring-like network, where each
computer can communicate with others without a coordinator or switch.
Thanks very much,
Ying Zhang
_______________________________________________
m5-users mailing list
[email protected]
http://m5sim.org/cgi-bin/mailman/listinfo/m5-users
