Ian, can you attach the updated ios.ijs as text attachment here? I want to try copy and paste.
On Sun, 20 Nov 2022 at 6:16 PM Ian Clark <[email protected]> wrote: > @ jerome > > You have an out-of-date version of: j/system/ios/ios.ijs > > > The app bundle has an up-to-date copy, but the recent App Store update has > not replaced your old copy. I have logged this as a bug. > > > Workaround > > > [1] Use Files app to copy the entire j/ folder from your sandbox to your > iCloud Drive (for restoring lost files) > > [2] Remove app: jios 903.1 from your device entirely > > [3] Reinstall jios 903.1 from App Store > > If unsure how to do these things, ask me. > > > Observations > > > Some users don't want an App Store update to overwrite sandbox scripts they > have edited. But some new features don't work unless (some) existing > (system) scripts are replaced. > > > The app already has ways to address the issue without reinstalling, but > they are unreliable, tricky to use and need a deep knowledge of both iOS > and App Store. Basically you must force jios to do a "maiden run". > > > On other platforms, pacman addresses this issue. But App Store prohibits > pacman for security reasons. At present the only reliable way to release an > upgraded addon or system script is to ship a new release. > > > Apple provides a better way, viz. a "public database". I am investigating > it. > > > Ian Clark > > On Sat, 19 Nov 2022 at 14:53, jerome fontaine <[email protected]> > wrote: > > > Hello from France > > Jios 903.1 iOS 15.6.1 and. 15.7.1 > > Edit panel displays a message in lite Gray > > value error: monadspaced > > not possible to write anything > > Home/term loadd ok > > I can work with samba Network to modify my files > > J901 Was ok > > > > Le mer. 16 nov. 2022 à 19:55, 'Mike Day' via General < > > [email protected]> > > a écrit : > > > > > Thanks, Ian. > > > > > > I've just tried closing the edit tabs again. The last remaining tab > > > showed <READFAIL>, but this time, I got the warning message when I > > > attempted to close it. No idea what's changed! So it seems you're ok > > > there. > > > > > > I'll private message you with those verbs; I was getting round to the > > > idea of a stack overflow, but guidance would be welcome on how to set > a > > > memory limit; is there a global we can set? Infinite recursion is > > > unlikely; I'll put a counter into the recursion on the laptop to give > us > > > some idea of the depths of successful and failing calls. (ie, failing > > when > > > in jios.) > > > > > > This cr/lf mess has been around for decades! I do of course realise > that > > > manual intervention can remove gratuitous extra blanks replacing > > redundant > > > CRs; let's hope you manage to correct this tedious "bug". > > > > > > While I remember, I was getting annoyed when transferring many ijs > > > scripts from Windows to iCloud using the laptop, and then "moving" them > > to > > > ~user because their time stamps kept disappearing. I've discovered a > DOS > > > utility called robocopy which does preserve attributes ignored by other > > > mechanisms. (xcopy might have done the trick, if I'd found the right > > > switches.) A simple batch file worked for me. > > > > > > Thanks again for all the hard work. > > > > > > Mike > > > > > > > > > > > > > > > > > > > > > Sent from my iPad > > > > > > > On 16 Nov 2022, at 16:53, Ian Clark <[email protected]> wrote: > > > > @ Mike > > > > > > > > Please give me more precise instructions on how to reproduce the > > crashes > > > > you are experiencing. > > > > > > > > The editor needs at least one script before it can appear. Trying to > > > close > > > > the last tab will show a warning alert, not a crash. If you've been > > able > > > to > > > > defeat the protections against this happening, I'd like to know how. > > > > > > > > Your maze verbs are unlikely to be crashing due to running out of > > memory, > > > > but out of stack. An infinite recursion will crash jios instead of > > giving > > > > |stack error as it should. The fix will be to upgrade JE. > > > > > > > > Where can I see your dfmaze / dfmazel verbs? Without them I don't > have > > > > enough information to reproduce the bug. > > > > > > > > If a script terminates its lines with CRLF instead of LF (as it will > if > > > > imported from Windows) then the redundant CR will be converted into a > > > > space. I believe the system verbs: load, open, fread automatically > > > convert > > > > CRLF to LF in all versions of J IDE. The jios editor does not, > because > > it > > > > reads scripts directly and does not ask JE to help it. I shall treat > > this > > > > as a bug, and fix it in the next release. Meanwhile a workaround is > to > > > > re-save the offending script having deleted the unwanted whitespace > > (CR). > > > > > > > > Ian > > > > > > > > On Wed, 16 Nov 2022 at 15:47, Ian Clark <[email protected]> > wrote: > > > > > > > >> @ Marv > > > >> > > > >> Try: > > > >> NO_BEEPS_i_ =: 1 > > > >> > > > >> Locale 'i' has several "watched nouns" you can reset this way. Their > > > names > > > >> give you a clue what they do. > > > >> > > > >> Having a dot-command to toggle beeps is a good idea. I'll try it > out. > > > >> > > > >> On Wed, 16 Nov 2022 at 12:44, Mark Shaw < > > > >> [email protected]> wrote: > > > >> > > > >>> Hi Ian > > > >>> Thank you for your hard work on the iOS version of J903, which runs > > > fairly > > > >>> nicely on my iPhone 7+. > > > >>> The only problem I have at the moment is that occasionally I need > the > > > app > > > >>> to be completely silent. Neither turning down the iPhone's volume > nor > > > >>> switching to silent mode were unable to silence all noise. Before > the > > > >>> update, I found a programmatic way of doing this using the config > > file, > > > >>> which I cannot now recall. (I forgot about this issue and so the > > > automatic > > > >>> update overwrote my file before I could back-up my solution!) > > > >>> Are you able to recommend a solution? Or a way or better - consider > > > adding > > > >>> a 'dot' command to set a 'slient-mode' flag, which allows 'silent > > > >>> running'. > > > >>> Many thanks > > > >>> Marv > > > >>> On Fri, 11 Nov 2022 at 23:03, Ian Clark <[email protected]> > > wrote: > > > >>>> Release 1.1 of j901 for iOS/iPadOS (version was 1.0) has been > > accepted > > > >>> by > > > >>>> Apple and is now available on App Store. If you have automatic > > updates > > > >>> set, > > > >>>> it will auto-update your installed app. Otherwise you need to > > > >>> re-install it > > > >>>> to get the latest version. > > > >>>> For safety's sake, copy the whole of the j/ folder in "On My iPad" > > to > > > >>>> iCloud Drive, to serve as a backup for lost/regressed files. > > > >>>> Subject to the limits of my ability to test it, it ought not to > lose > > > any > > > >>>> files in j/user or j/config you've created / updated. However it > > will > > > >>> erase > > > >>>> and replace the whole of '~addons' and '~system'. > > > >>>> Note that '~addons' now contains the latest JAL (aka pacman) > addons. > > > >>> This > > > >>>> is not to guarantee they will run. Specifically: > > > >>>> ++ no dylibs are bundled with the product. You can try putting > these > > > >>> back, > > > >>>> but you need arm64 versions of these binaries. > > > >>>> ++ App Store rejected some addons/api scripts when I submitted the > > new > > > >>>> bundle. > > > >>>> ++ Windows Driver (wd) is not supported – and that includes GL2 > > > >>>> There are known issues with the app, especially ones that have > > > surfaced > > > >>> in > > > >>>> the last 2 months. It was considered essential to get the tested > > > update > > > >>>> into App Store, and proceed by small steps, rather than > indefinitely > > > >>> delay > > > >>>> releasing the first update. It will be easier to negotiate with > > Apple > > > >>>> Review if a given update fixes one and only one issue per release. > > E.g > > > >>> a JE > > > >>>> upgrade or updating to the latest JAL. > > > >>>> For a list of the main fixes/new features, see the app's page on > App > > > >>> Store. > > > >>>> I will update Guides/iOS in due course. I hadn't expected the > Apple > > > >>> review > > > >>>> to go through so quickly. > > > >>>> Ian Clark > > > >>>> On Mon, 7 Nov 2022 at 01:32, Ian Clark <[email protected]> > > wrote: > > > >>>>> Release 1.1 of j901 for iOS/iPadOS (current version is 1.0) has > > been > > > >>>>> submitted to Apple App Store for review. If it passes review, it > > will > > > >>> be > > > >>>>> immediately available on App Store. > > > >>>>> I'm announcing it now to give you time to switch off automatic > > > >>> updates, > > > >>>> if > > > >>>>> you'd rather download the new version yourself from App Store at > a > > > >>> time > > > >>>> of > > > >>>>> your own choosing. Once you download the update (1.1), the old > > > version > > > >>>> 1.0 > > > >>>>> cannot be re-installed. > > > >>>>> I shall announce Apple's decision when they give me it. > > > >>>>> The App Store entry will summarise changes. Essentially this is a > > > >>>> bug-fix, > > > >>>>> plus optional syntax coloring in the Editor. Apart from that, the > > > >>>>> look-and-feel is basically unchanged. > > > >>>>> Ian Clark > > > >>>> > > ---------------------------------------------------------------------- > > > >>>> For information about J forums see > > > http://www.jsoftware.com/forums.htm > > > >>> > > ---------------------------------------------------------------------- > > > >>> For information about J forums see > > http://www.jsoftware.com/forums.htm > > > > > ---------------------------------------------------------------------- > > > > For information about J forums see > http://www.jsoftware.com/forums.htm > > > ---------------------------------------------------------------------- > > > For information about J forums see http://www.jsoftware.com/forums.htm > > > > > ---------------------------------------------------------------------- > > For information about J forums see http://www.jsoftware.com/forums.htm > > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
