Is that ( if. key ~: GDK_Return do. 0 return. end. ) redundant? I can see Edit (not Term) trap home and arrow keys to implement movement by J token, does KP_... keys behave in the same way?
Птн, 01 Апр 2011, Ric Tikkanz писал(а): > AFAIK all the other keys seem to work OK. > > I've committed a fix to the Public repository that seems to fix the > behaviour of KP_Enter in the Gtk Term window. > > There are a bunch of other references to GDK_Return throughout ide/gtk > (along the lines of ( if. key ~: GDK_Return do. 0 return. end. ) ) but > the use of GDK_KP_Enter seems to give the same result for the cases > I've tested (e.g. FIF). > > On Fri, Apr 1, 2011 at 1:03 PM, bill lam <[email protected]> wrote: > > I work with a mini size keybboard that does not have num keypad to test. > > You may also test if home or arrow needs fix. The relevent gdk scan codes > > for > > num keypad are > > > > #define GDK_KP_Space 0xff80 > > #define GDK_KP_Tab 0xff89 > > #define GDK_KP_Enter 0xff8d > > #define GDK_KP_F1 0xff91 > > #define GDK_KP_F2 0xff92 > > #define GDK_KP_F3 0xff93 > > #define GDK_KP_F4 0xff94 > > #define GDK_KP_Home 0xff95 > > #define GDK_KP_Left 0xff96 > > #define GDK_KP_Up 0xff97 > > #define GDK_KP_Right 0xff98 > > #define GDK_KP_Down 0xff99 > > #define GDK_KP_Prior 0xff9a > > #define GDK_KP_Page_Up 0xff9a > > #define GDK_KP_Next 0xff9b > > #define GDK_KP_Page_Down 0xff9b > > #define GDK_KP_End 0xff9c > > #define GDK_KP_Begin 0xff9d > > #define GDK_KP_Insert 0xff9e > > #define GDK_KP_Delete 0xff9f > > #define GDK_KP_Equal 0xffbd > > #define GDK_KP_Multiply 0xffaa > > #define GDK_KP_Add 0xffab > > #define GDK_KP_Separator 0xffac > > #define GDK_KP_Subtract 0xffad > > #define GDK_KP_Decimal 0xffae > > #define GDK_KP_Divide 0xffaf > > #define GDK_KP_0 0xffb0 > > #define GDK_KP_1 0xffb1 > > #define GDK_KP_2 0xffb2 > > #define GDK_KP_3 0xffb3 > > #define GDK_KP_4 0xffb4 > > #define GDK_KP_5 0xffb5 > > #define GDK_KP_6 0xffb6 > > #define GDK_KP_7 0xffb7 > > #define GDK_KP_8 0xffb8 > > #define GDK_KP_9 0xffb9 > > > > Птн, 01 Апр 2011, Ric Tikkanz писал(а): > >> Currently the Gtk IDE Term window doesn't treat the Return key and the > >> Keypad Enter key as equivalent. > >> Pressing the Return key while the curspr is in the last line of the > >> Term window will execute the line. Pressing the Return key while the > >> cursor is in a line other than the last one in the Term window will > >> copy that line to the last line of the Term window. > >> Pressing the Keypad_Enter key will just insert a LF whenever it is pressed. > >> > >> I suspect that this behaviour is not intended and intend to correct it > >> so that both keys have the same effect. Any objections? > >> ---------------------------------------------------------------------- > >> For information about J forums see http://www.jsoftware.com/forums.htm > > > > -- > > regards, > > ==================================================== > > GPG key 1024D/4434BAB3 2008-08-24 > > gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3 > > ---------------------------------------------------------------------- > > For information about J forums see http://www.jsoftware.com/forums.htm > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm -- regards, ==================================================== GPG key 1024D/4434BAB3 2008-08-24 gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3 ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
