>> 1. for rdma_disconnect - mention that >> - it applies only to connected service >> - the QP is moved to the error state and following that all the posted >> work requests will be flushed to the completion queue.
>From rdma_disconnect.3: "Disconnects a connection and transitions any associated QP to the error state, which will flush any posted work requests to the completion queue." >> 2. for rdma_join_multicast >> - mention that as with unicast, if source address is provided to >> rdma_resolve_addr then the routing table need not be set to route this >> group to an ipoib device >From rdma_join_multicast.3: "Before joining a multicast group, the rdma_cm_id must be bound to an RDMA device by calling rdma_bind_addr or rdma_resolve_addr. Use of rdma_resolve_addr requires the local routing tables to resolve the multicast address to an RDMA device, unless a specific source address is provided." - Sean _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
