On Thursday 20 March 2008 15:12:03 Hal Rosenstock wrote: > On Thu, 2008-03-20 at 13:54 +0100, Bernd Schubert wrote: > > On Thursday 20 March 2008 13:27:36 Hal Rosenstock wrote: > > > On Thu, 2008-03-20 at 12:30 +0100, Bernd Schubert wrote: > > > > Hello, > > > > > > > > on one of our systems we get a rather huge numbers of > > > > RcvSwRelayErrors. All I find about RcvSwRelayErrors is > > > > > > > > "This counter can increase due to a valid network event" > > > > > > > > But what might cause? > > > > Ooops. This should have been "But what might cause it?" > > > > > Are you running IB multicast (e.g. IPoIB) ? That's the most common > > > cause. > > > > IPoIB is up, but so far only used initially by lustre for initial lnet > > o2ib setup, but then AFAIK not any more. I think some MPI > > stacks/applications also do their intial connection using IPoIB. > > > > But in general, once these connections are established, IPoIB is not much > > used anymore. > > The causes are: > 1. DLID mapping > 2. VL mapping > 3. looping (out port = in port) > > Is your subnet unstable in some way ? Are you using QoS ? >
We have seen some odd problems with opensm (from ofef-1.2.5) in the past and once only rebooting the switches did help. Yesterday I started monitoring the the fabric and even though there's not much traffic, I immediately noticed these errors. We are not using QoS. Thanks for your help, Bernd -- Bernd Schubert Q-Leap Networks GmbH _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
