You need to get in touch with Mellanox Support (FAE) at this point. - Jack
On Monday 02 March 2009 17:07, lakshmana swamy wrote: > > Hi Jack, > > > Yes, I connected the cable between two ports of same HCA. Without running > opensmd. > > Now the State is " Initializing" > > I observed same state in other node also. > > If cable is bad, it should not show this state right... > > Thanks > laxman > > > > From: ja...@dev.mellanox.co.il > > To: klakshma...@hotmail.com > > Subject: Re: Problem in IB network without Switch > > Date: Mon, 2 Mar 2009 16:46:46 +0200 > > CC: keshetti.mah...@gmail.com; general@lists.openfabrics.org > > > > On Monday 02 March 2009 16:38, lakshmana swamy wrote: > > > > > > > > HI Jack > > > > > > I have updated the firmware of HCA in both the machines, but the status > > > remains same. > > > Please have a look at the following outputs. > > > > > > What may be the problem ? > > > > > Your physical connection is bad. Check your cables. > > > > Try connecting Port 1 to Port 2 of the same HCA directly, and see if you > > still get state: Down. > > (you should see state: init before running opensm). > > > > - Jack > > > > > [r...@locluster ~]# ibstat > > > CA 'mthca0' > > > CA type: MT23108 > > > Number of ports: 2 > > > Firmware version: 3.5.917 > > > Hardware version: a1 > > > Node GUID: 0x0002c90108cd13c0 > > > System image GUID: 0x0002c90108cd13c0 > > > Port 1: > > > State: Down > > > Physical state: Polling > > > Rate: 2 > > > Base lid: 0 > > > LMC: 0 > > > SM lid: 0 > > > Capability mask: 0x02510a6a > > > Port GUID: 0x0002c90108cd13c1 > > > Port 2: > > > State: Down > > > Physical state: Polling > > > Rate: 2 > > > Base lid: 0 > > > LMC: 0 > > > SM lid: 0 > > > Capability mask: 0x02510a68 > > > Port GUID: 0x0002c90108cd13c2 > > > [r...@locluster ~]# > > > > > > [r...@locluster1 ~]# ibstat > > > CA 'mthca0' > > > CA type: MT23108 > > > Number of ports: 2 > > > Firmware version: 3.5.917 > > > Hardware version: a1 > > > Node GUID: 0x0002c9020000114c > > > System image GUID: 0x0002c9020000114f > > > Port 1: > > > State: Down > > > Physical state: Polling > > > Rate: 2 > > > Base lid: 0 > > > LMC: 0 > > > SM lid: 0 > > > Capability mask: 0x02510a68 > > > Port GUID: 0x0002c9020000114d > > > Port 2: > > > State: Down > > > Physical state: Polling > > > Rate: 2 > > > Base lid: 0 > > > LMC: 0 > > > SM lid: 0 > > > Capability mask: 0x02510a68 > > > Port GUID: 0x0002c9020000114e > > > [r...@locluster1 ~]# > > > > > > > > > > > > ThankQ > > > > > > laxman > > > > > > > > > From: klakshma...@hotmail.com > > > To: ja...@dev.mellanox.co.il > > > CC: keshetti.mah...@gmail.com; general@lists.openfabrics.org > > > Subject: RE: Problem in IB network without Switch > > > Date: Fri, 27 Feb 2009 09:56:38 +0530 > > > > > > > > > > > > > > > > > > > > > > > > > > > ThanQ Jack > > > > > > I will Update the firmware and let you know the status > > > > > > laxman > > > > > > > From: ja...@dev.mellanox.co.il > > > > To: klakshma...@hotmail.com > > > > Subject: Re: Problem in IB network without Switch > > > > Date: Thu, 26 Feb 2009 18:49:40 +0200 > > > > CC: keshetti.mah...@gmail.com; general@lists.openfabrics.org > > > > > > > > You are running VERY old firmware (from 2004), and moreover, on one host > > > > you have 3.0.0, and on the other 3.1.0. > > > > > > > > You need to upgrade your firmware. > > > > Contact your Mellanox FAE (support engineer) for instructions. > > > > > > > > - Jack > > > > > > > > > Hi Jack, > > > > > > > > > > Please find the output of ibstat on both the nodes, . > > > > > > > > > > [r...@mattool ~]# /opt/ofed/extras/hca_self_test.ofed > > > > > HCA Firmware Check ..................... FAIL > > > > > REASON: mismatch HCA #0 firmware detected (found v, need v3.5.917) > > > > > Host Driver Initialization ............. PASS > > > > > > > > > > [r...@mattool ~]# > > > > > > > > > > ************ IBSTAT output ****************** > > > > > > > > > > > > > > > [r...@mattool ~]# ibstat > > > > > CA 'mthca0' > > > > > CA type: MT23108 > > > > > Number of ports: 2 > > > > > Firmware version: 3.1.0 > > > > > > > > > [r...@compute-0-0 ~]# ibstat > > > > > CA 'mthca0' > > > > > CA type: MT23108 > > > > > Number of ports: 2 > > > > > Firmware version: 3.0.0 > > > > > > Get a view of the world through MSN Video. Some things just cannot be > > > left unseen. Try it! > > > _________________________________________________________________ > > > Express your true emotions! Send a virtual kiss! Do all these cool stuff > > > & more with Windows Live Messenger. Download here > > > http://www.windowslive.com/Desktop/Messenger > > _________________________________________________________________ > Express your true emotions! Send a virtual kiss! Do all these cool stuff & > more with Windows Live Messenger. Download here > http://www.windowslive.com/Desktop/Messenger _______________________________________________ general mailing list general@lists.openfabrics.org http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
