On Lun, 21 Settembre 2009 8:04 am, Dotan Barak wrote: > Hi. > > On Fri, Sep 18, 2009 at 11:41 PM, Roberto Fichera <[email protected]> > wrote: >> Hi All in the list, >> >> I would like to know if it's possible to configure a linux server with 2 >> or 3 HCAs, with 2 ports each, so that I can connect 4 or 6 nodes without >> using any switch in the middle. If possible, please show an example of >> the >> network configuration. > > Yes, this is possible. > > But please pay attention: Every port will be in a different Infiniband > subnet (from the local host point of view).
yes! I know! Actually I don't need any communication between nodes via IB nodes. I'll use a normal Gb network for that. > > What do you plan to do with this setup? > (which SW/program to use?) A dedicated 10GB link for a limited number of nodes. The server will work like a SAN storage, nodes are mainly used for Xen virtualization. > > Dotan > _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
