Hello, Documentation lies. Password is NOT Tizen but tizen with lowercase.
-- Pasi On May 17, 2013, at 11:46 AM, venkat.s...@smartplayin.com wrote: > Hi, > > Try both Login and Pasword as "root " > > > I am usingf the same "con:12345:respawn:/sbin/getty -L 115200 tty02 vt100" > for serial console. > > Thanks, > Venkat Raju. > > > -----Original Message----- > From: "kumar sangakara" <anthe...@gmail.com> > Sent: Friday, May 17, 2013 1:26pm > To: "Vikash Kumar" <vikashsuperc...@gmail.com>, "Badri C" > <badricha...@gmail.com>, "Raju Sana" <venkat.s...@smartplayin.com>, > maruthi.bayyavar...@smartplayin.com, dhruv.cha...@smartplayin.com > Subject: Re: Tizen on pandaboard > > Hi > > I'm using the > http://download.tizen.org/releases/previews/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/ > tar gz file with my kernel and uboot > I'm able to get file system mounted. > > But serial console,I'm not able to get. > I have tried all these > con:12345:respawn:/sbin/getty -L 115200 tty02 vt100 > con:12345:respawn:/sbin/getty -L 115200 ttyS0 vt100 > con:12345:respawn:/sbin/getty -L 115200 tty00 vt100 > > All seems to not work. > > Also I have given the following in the /etc/rc.d/rc.sysinit script > /bin/login Login name: root Password: Tizen and its fails like this > > (none) login: root > Password: (Typed Tizen) > Login incorrect > > Also getting this on touch screen > > Composite warning > > "Your screen does not support OpenGL > Falling back to software engine" > > Not getting Tizen UI > > I understand opengl and drm rpm packages need to be installed through sdb . > But for that, i need to get the console at least. > > I appreciate if you can Please help me on this ASAP > > Regards > Prasanna > > > On Tue, Apr 16, 2013 at 10:23 AM, Vikash Kumar <vikashsuperc...@gmail.com> > wrote: > Hi, > > Yeah you are right not every project need to be cloned, but I dont have the > list of the necessary projects. > If you have, do share the same with me too. > > For the build process, I used the same steps that are mentioned at the gbs > reference https://source.tizen.org/documentation/gbs-build . > > First configure the ~/.gbs.conf file with the correct url under tizen repo > field, and then run the following command from inside the tizen directory. > > sudo gbs build -A armv7l --include-all > > Let me know if there is any problem with this. > > Thanks, > Vikash. > > > On Mon, Apr 15, 2013 at 2:35 PM, kumar sangakara <anthe...@gmail.com> wrote: > Thanks for your reply. > I think not every project need to be cloned. > After necessary things are cloned, > How to build it all? > > Also how did you build it? > > Regards > Karthik > > > On Sat, Apr 13, 2013 at 12:46 PM, Vikash Kumar <vikashsuperc...@gmail.com> > wrote: > Hi, > > Apologies for replying this late...:) > > Ok so for cloning the entire source, I have followed the > https://source.tizen.org/documentation/cloning-and-building only. > > Otherwise you can also this, > > git clone > ssh://vikash...@review.tizen.org:29418/adaptation/alsa-scenario-scn-data-0-base > adaptation/alsa-scenario-scn-data-0-base > > You have to clone every package separately, so its a bit troublesome process. > > Another way is to use the steps written here > http://gitorious.org/tizen-toys/tizen-manifest#more > > I didnt tried this because of some internal network problems. But you can try > this also. > > For built tizen filesytem, I am using this > download.tizen.org/releases/2.0/tizen-2.0_20130219.4/images/RD-210/RD-210-tizen-2.0_20130219.4.tar.gz > > For uboot and kernel, I am using ubuntu kernel for Omap board. You can get > this at http://omappedia.org/wiki/Prebuilt_ubuntu_binaries > > One more thing, I dont know you already tried this or not, but make 3 > partition on your sdcard, for boot, platform and data. 'dd' platform.img and > data.img (you will get this after untaring the above filesystem) over > platform and data partition. > > I have tried all this but am also stuck at mounting of the filesystem. > > Do let me know if I am wrong at any point. > > Thanks, > > Vikash > > On Fri, Apr 12, 2013 at 12:13 PM, kumar sangakara <anthe...@gmail.com> wrote: > Hi > > Can you pl give me the commands you tried for coloing entire source? > With uboot,kernel and tizen filesystem? > > Kindly give me the commands > > Regards > karthik > _______________________________________________ > General mailing list > General@lists.tizen.org > https://lists.tizen.org/listinfo/general _______________________________________________ General mailing list General@lists.tizen.org https://lists.tizen.org/listinfo/general