Hi, I've forgotten to ask: are you using the 'hw_imx53' or 'foc_imx53' base platform? I just ask, because the Fiasco.OC kernel version currently used by Genode is known to not work properly on i.MX53 QSB:
https://github.com/genodelabs/genode/issues/704 So, please only use 'hw_imx53' at this time. Regards Stefan On 07/08/2013 10:39 AM, Stefan Kalkowski wrote: > Hi Archie, > > On 07/07/2013 12:39 PM, Archie Nidhi wrote: >> Hello I have a few questions >> >> We have successfully created an uImage by following the steps given in >> https://github.com/genodelabs/genode/commit/ce58a63fb661df42e6bf283891589b11a1f411f2#commitcomment-2891606 >> > > it is not necessary anymore to do the steps for building a u-boot image > manually. In the latest release notes you'll find a section that > describes how to do this automatically when issuing a run script: > > http://genode.org/documentation/release-notes/13.05#TFTP_boot_using_U-Boot > > Please, assure to use the latest Genode version, either by cloning > current master branch of the Genode git repository, or by downloading > the lates release. Then do e.g.: > 'RUN_OPT="--target uboot" make run/demo' > in a freshly created build directory, and boot the resulting image at: > [your_build_directory]/var/run/uImage > >> We tried to transfer the uImage by tftp and got the following error >> >> U-Boot > setenv serverip 10.6.1.123 >> U-Boot > setenv ipaddr 10.6.1.122 >> U-Boot > setenv bootfile uImage >> U-Boot > tftp >> Using FEC device >> TFTP from server 10.6.1.123; our IP address is 10.6.1.122 >> Filename 'uImage'. >> Load address: 0x10800000 >> Loading: ################################################################# >> ################################################################# >> ################################################################# >> ################################################################# >> ################################################################# >> ################################################################# >> ################################################################# >> #### >> done >> Bytes transferred = 2346876 (23cf7c hex) >> U-Boot > bootm >> ## Booting kernel from Legacy Image at 10800000 ... >> Image Name: >> Image Type: ARM Linux Kernel Image (gzip compressed) >> Data Size: 2346812 Bytes = 2.2 MiB >> Load Address: 70140000 >> Entry Point: 7018b33c >> Verifying Checksum ... OK >> Uncompressing Kernel Image ... >> > > To me this indicates that something went wrong when loading the kernel, > please assure to use the way described above. If it nevertheless stucks > at this place, would you please post the whole initial u-boot output in > the first place? > >> It is stuck over here , let me know whether there is another way to >> convert uImage to a form from which we can boot from a sdcard. > > You can always use one and the same uImage to boot it via TFTP, or read > it from sd-card. There is no difference. For information on how to boot > a uImage from sd-card, you might consider the u-boot documentation, or > online references. > > Regards > Stefan > >> >> Thanks and Regards >> Anubhav >> >> >> >> ------------------------------------------------------------------------------ >> This SF.net email is sponsored by Windows: >> >> Build for Windows Store. >> >> http://p.sf.net/sfu/windows-dev2dev >> >> >> >> _______________________________________________ >> Genode-main mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/genode-main >> > -- Stefan Kalkowski Genode Labs http://www.genode-labs.com/ ยท http://genode.org/ ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Genode-main mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/genode-main
