Hi Aditya, On 07/08/2013 08:48 AM, Aditya Kousik wrote: > Hello, > > I'm trying to run Genode on an i.MX6. And I've tried copying uImage. But > that doesn't seem to be enough. I came across this : > http://comments.gmane.org/gmane.os.genode.devel/813
I hope you're not trying to use the uImage build for i.MX53 on a i.MX6 platform? Apart from u-boot, the kernel, as well as Genode's core process, and drivers are hardly bound not only to the SoC (i.MX53 or i.MX6), but also to the board the SoC is built in. So you can't just run the same image built for i.MX53 Quickstart board without modifications on some i.MX6 board. Regards Stefan > > Your set of u-boot files, is it pandaboard specific? or can the MLO, > u-boot.bin be copied to any device and booted? > > What's the procedure of booting from using the image.elf? (So far, i ran > mkimage and created a uImage file. But that's obviously not enough. > What's missing?) > > Thanks and regards, > Aditya > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > > > > _______________________________________________ > Genode-main mailing list > Genode-main@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/genode-main > -- Stefan Kalkowski Genode Labs http://www.genode-labs.com/ ยท http://genode.org/ ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Genode-main mailing list Genode-main@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/genode-main
