Hi GenodeOS and L4-Hackers communityI'm trying to use DWC_OTG USB Driver for RaspberryPI, using Fiasco.OC as microkernel with Genode. I have tested the USB driver using Genode bare metal hardware on RaspberryPI and works fine. I have reviewed the post published by Simon Arlott about the FIQ and Bell IRQ:
http://permalink.gmane.org/gmane.linux.kernel.rpi/438Also I have reviewed the correction implemented by Norman Feske in the IRQ controller for Genode bare metal hardware:
repos/base-hw/src/core/include/spec/rpi/pic.hTo use Fiasco.OC as microkernel in Genode I have adapted the patch published in:
http://sourceforge.net/p/genode/mailman/message/33071769/Based on it, i have tried to use the same idea of Norman Feske, modifying the Fiasco.OC's IRQ's controller as shown below:
------
kernel/fiasco/src/kern/arm/bsp/bcm2835/mem_layout-arm-bcm2835.cpp ------
index aab5906..4385ebe 100644
@@ -8,5 +8,6 @@ public:
Pic_phys_base = 0x2000b200,
Watchdog_phys_base = 0x20100000,
Uart_phys_base = 0x20201000,
+ Usb_dwc_otg_base = 0x20980000,
};
};
----------
kernel/fiasco/src/kern/arm/bsp/bcm2835/pic-arm-bcm2835.cpp ----------
index 20ed280..13fa623 100644
@@ -7,6 +7,83 @@ IMPLEMENTATION [arm && bcm2835]:
#include "irq_mgr.h"
#include "mmio_register_block.h"
#include "kmem.h"
+#include "warn.h"
+
+class Usb_dwc_otg : Mmio_register_block{
+private:
+ enum{
+ Core_irq_status_reg = 0x14,
+ Guid_reg = 0x3c,
+ Host_frame_number_reg = 0x408,
+ };
+ bool is_sof() const { return read<Mword>(Core_irq_status_reg)&0x8; }
+};
+
+PUBLIC
+Usb_dwc_otg::Usb_dwc_otg()
+: Mmio_register_block(Kmem::mmio_remap(Mem_layout::Usb_dwc_otg_base))
+{
+
+ write<Mword>(read<Mword>(Guid_reg)&0x3FFFC000, Guid_reg);
+}
+
+PRIVATE
+static bool
+Usb_dwc_otg::need_trigger_sof(Mword host_frame, Mword scheduled_frame)
+{
+ Mword const max_frame = 0x3fff;
+
+ if (host_frame < scheduled_frame) {
+ if (scheduled_frame - host_frame < max_frame / 2)
+ return false; /* scheduled frame not reached yet */
+ else
+ return true; /* scheduled frame passed, host frame wrapped */
+ } else {
+ if (host_frame - scheduled_frame < max_frame / 2)
+ return true; /* scheduled frame passed */
+ else
+ return false; /* scheduled frame wrapped, not reached */
+ }
+}
+
+PUBLIC
+bool
+Usb_dwc_otg::handle_sof()
+{
+ if (!is_sof())
+ return false;
+
+ static Mword cnt, stat_cnt, filter_cnt, kick_cnt, trigger_cnt;
+
+ stat_cnt++;
+ if (stat_cnt == 8000) {
+ WARN("kicked: %d filtered: %d triggered: %d", kick_cnt,
filter_cnt, trigger_cnt);
+ stat_cnt = 0;
+ }
+
+ cnt++;
+ if (cnt == 8*20) {
+ cnt = 0;
+ return false;
+ }
+
+ if (read<Mword>(Guid_reg)&0x40000000)
+ kick_cnt++;
+
+ if ((!read<Mword>(Guid_reg)&0x80000000) ||
(read<Mword>(Guid_reg)&0x40000000))
+ return false;
+
+ if
(Usb_dwc_otg::need_trigger_sof(read<Mword>(Host_frame_number_reg)&0x3fff,
read<Mword>(Guid_reg)&0x3fff)) {
+ trigger_cnt++;
+ return false;
+ }
+
+ filter_cnt++;
+
+ write<Mword>(read<Mword>(Core_irq_status_reg)|0x8,
Core_irq_status_reg);
+
+ return true;
+}
class Irq_chip_bcm : public Irq_chip_gen, Mmio_register_block
{
@@ -29,6 +106,9 @@ public:
bool is_edge_triggered(Mword) const { return false; }
void set_cpu(Mword, Cpu_number) {}
void ack(Mword) { /* ack is empty */ }
+
+private:
+ Usb_dwc_otg _usb;
};
PUBLIC
@@ -97,6 +177,11 @@ Irq_chip_bcm::irq_handler()
{
b = 0;
p = read<Mword>(Irq_pending_1);
+ if(p==8){
+ if(_usb.handle_sof()){
+ return;
+ }
+ }
}
else if (p & 0x200)
{
I have tried to test the *usb_hid *example on Genode using Fiasco.OC as
microkernel
make run/usb_hidThe example compiles fine. When I test it in the emulator QEMU get the following output
KERNEL: Warning: kicked: 0 filtered: 0 triggered: 7950 KERNEL: Warning: kicked: 0 filtered: 0 triggered: 15900 KERNEL: Warning: kicked: 0 filtered: 0 triggered: 23850 KERNEL: Warning: kicked: 0 filtered: 0 triggered: 31800When have tested it on real hardware never get the kernel warning. It seems that the *Kick* and *Num_valid* bits are not modified by the USB driver.
After that, I have tried to log the USB driver IRQ, setting #define DEBUG_IRQ 1 in the file repos/dde_linux/src/lib/usb/include/lx_emul.hSetting this value, the USB driver will log every IRQ handled by the function *_handle()* and *_handle_one()***in the USB driver. In the Genode bare metal hardware it works fine, but when tried it with Fiasco.OC, the IRQ handler *_handle()* and *_handle_one()* are never logged. There's something wrong in my implementation? Someone has tested the USB driver using Fiasco.OC and Genode together? Why Fiasco.OC's IRQ's controller is not calling the IRQ's handler defined in the USB driver? I'm using Genode commit 63293950261bfb17497433c36a3d62e6e1d813b3, Fiasco.OC r56 and DWC_OTG commit d08b205cfe01925667f3591117b6d3e1087b4e19.
Best regards -- Lic. Reinier Millo Sánchez Centro de Estudios de Informática Universidad Central "Marta Abreu" de Las Villas "antes de discutir ... respira; antes de hablar ... escucha; antes de escribir ... piensa; antes de herir ... siente; antes de rendirte ... intenta; antes de morir ... vive"
<<attachment: rmillo.vcf>>
------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________ genode-main mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/genode-main
