Guys, After a kernel rebuild my machine was pretty fast! =D
My new config: cat /usr/src/linux/.config | grep -i cpu # CONFIG_GENERIC_CPU is not set CONFIG_X86_CPUID=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CPU Frequency scaling CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set Since I'm running a desktop machine, not a laptop, I removed all non related options. Chris, no problem with my DMA:
hdparm /dev/hda
/dev/hda: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 65535/16/63, sectors = 156250000, start = 0 Thanks for all tips everybody! On 4/27/06, Chris Wall <[EMAIL PROTECTED]> wrote:
Fernando Boaglio wrote: >Hmm... > >Please check my kernel config file: > > > >>cat /usr/src/linux/.config | grep -i cpu >> >> ># CONFIG_GENERIC_CPU is not set >CONFIG_X86_CPUID=y >CONFIG_SPLIT_PTLOCK_CPUS=4 ># CPU Frequency scaling >CONFIG_CPU_FREQ=y >CONFIG_CPU_FREQ_TABLE=y ># CONFIG_CPU_FREQ_DEBUG is not set >CONFIG_CPU_FREQ_STAT=y ># CONFIG_CPU_FREQ_STAT_DETAILS is not set >CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ># CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set >CONFIG_CPU_FREQ_GOV_PERFORMANCE=y >CONFIG_CPU_FREQ_GOV_POWERSAVE=y >CONFIG_CPU_FREQ_GOV_USERSPACE=y >CONFIG_CPU_FREQ_GOV_ONDEMAND=y >CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ># CPUFreq processor drivers ># CONFIG_X86_ACPI_CPUFREQ is not set ># CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set > >Should I change anything ? > >Maybe I should remove CONFIG_CPU_FREQ_GOV_CONSERVATIVE and >CONFIG_CPU_FREQ_GOV_POWERSAVE... > >=) > >On 4/27/06, Sergio Polini <[EMAIL PROTECTED]> wrote: > > >>Fernando Boaglio: >> >> >>>It's not about startup time, it's about running time, sometimes the >>>systems freezes >>>a little bit, just like asking for more CPU or RAM. >>> >>> >>I'ld look at the cpu frequency governor. >>From /usr/src/linux/drivers/cpufreq/Kconfig, about the 'conservative' >>governor: >> >>"If you have a desktop machine then you should really be considering >>the 'ondemand' governor instead, however if you are using a laptop, >>PDA or even an AMD64 based computer (due to the unacceptable >>step-by-step latency issues between the minimum and maximum frequency >>transitions in the CPU) you will probably want to use this governor." >> >>As far as I can understand, this means that AMD64 takes "a lot" of >>time to switch between two frequencies, so "the system freezes a >>little bit" when this happens. >> >>This is why I've choosen the conservative governor for my HP dv5000 >>laptop. >> >>My 2 cents ;-) >> >>Sergio >> >>-- >>gentoo-amd64@gentoo.org mailing list >> >> >> >> > > >-- >[]'s >[EMAIL PROTECTED] > > > Also, check your hard drive parameters and make sure DMA is on. I always get tripped up by this between an Intel 2.53 machine and my AMD64 3200+ machine. It seems that everytime I rebuild the kernel on the AMD64 I forget to set the correct values for DMA access. Chris -- gentoo-amd64@gentoo.org mailing list
-- []'s [EMAIL PROTECTED] -- gentoo-amd64@gentoo.org mailing list