Hi, please apologize that I hijack the thread but it seems that I have
the same problem as Piotr.

The output of lspci is the same as described by Piotr.  So I think
that we have the same cards.

>>>>> "Duncan" == Duncan  <[EMAIL PROTECTED]> writes:

  > Support for the RV300 series is /very/ new and still somewhat
  > experimental.  You may get 2D but not 3D support.  You are also
  > likely to have better luck with the latest xorg 7.2, which may
  > still be masked, I'm not sure (I loaded it when it was).

I don't think that the RV300 cards are too new.  I bought it end of
last year and it worked very well with the xorg-6.8 radeon server.

It doesn't work after the latest system update (which switched to
xorg-7.0.0.).

I suppose that I did not install X11 completely.  I renamed /etc/X11
to /etc/X11-backup and re-emerged xorg-x11 in the hope I get a new
/etc/X11 directory.  But this did not happen.  /etc/X11 contains a lot
of files and I assume that many things had been changed there.

I followed the instructions given in

  http://gentoo.org/proj/en/desktop/x/x11/modular-x-howto.xml

but I'm not sure that everything I did was correct.

Here is my xorg.conf with all comments removed.  Piotr, does it work
for you?  It's what I used with xorg-6.8.

If it's more convenient for you to download the file instead of
extracting it from this mail, download:

  http://ms25.ath.cx/xorg.conf

This file contains all comments.

__________________________________________________________________

Section "ServerLayout"
        Identifier     "Main Layout"
        Screen      0  "Screen 0" 0 0
        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"
        FontPath     "/usr/local/share/fonts/75dpi/"
        FontPath     "/usr/local/share/fonts/75dpi/:unscaled"
        FontPath     "/usr/local/share/fonts/100dpi/"
        FontPath     "/usr/local/share/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/misc/"
        FontPath     "/usr/share/fonts/urwvn-fonts/"
        FontPath     "/usr/share/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/Type1/"
        FontPath     "/usr/share/fonts/TTF/"
        FontPath     "/usr/share/fonts/75dpi/"
        FontPath     "/usr/share/fonts/100dpi/"
        FontPath     "/usr/share/fonts/intlfonts/"
        FontPath     "/usr/local/share/fonts/lm/"
EndSection

Section "Module"
        Load  "dbe"
        SubSection "extmod"
        Option      "omit xfree86-dga"
        EndSubSection
        Load  "type1"
        Load  "freetype"
EndSection

Section "ServerFlags"
        Option      "blank time" "30"   # 10 minutes
        Option      "standby time" "20"
        Option      "suspend time" "30"
        Option      "off time" "60"
EndSection

Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option      "AutoRepeat" "0 0"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "de"
        Option      "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "PS/2"
        Option      "Device" "/dev/input/mouse0"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        HorizSync    30.0 - 121.0 # Warning: This may fry old Monitors
        VertRefresh  50.0 - 150.0 # Very conservative. May flicker.

        DisplaySize 400 300

        ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 
-hsync +vsync
        ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 
-hsync +vsync
        ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 
-hsync +vsync
        ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 
+HSync +VSync
        ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 
+HSync +VSync
EndSection

Section "Device"
        Identifier  "ATI Graphics Adapter 0"
        Driver      "radeon"
        Option      "NoAccel" "no"
        Option      "MergedFB" "off"
        Option      "UseFBDev" "off"
        Option      "BusType" "PCIE"
        Option      "MonitorLayout" "CRT"
EndSection

Section "Screen"
        Identifier "Screen 0"
        Device     "ATI Graphics Adapter 0"
        Monitor    "Monitor 0"
        DefaultDepth     24
    Subsection "Display"
        Depth       8
        Modes       "1800x1440" "1280x1024" "1600x1200"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1800x1440" "1280x1024" "1600x1200"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1800x1440" "1280x1024" "1600x1200"
        ViewPort    0 0
    EndSubsection
EndSection
__________________________________________________________________


Here is the server log:

__________________________________________________________________
xauth:  creating new authority file /root/.serverauth.9354

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-gentoo-r9 x86_64
Current Operating System: Linux zaphod 2.6.16-gentoo-r9 #1 Sun Jun 18 02:52:53 
CEST 2006 x86_64
Build Date: 16 August 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 20 04:40:55 2006
(==) Using config file: "/etc/X11/xorg.conf"

(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(**) RADEON(0): RADEONPreInit
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x08000000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x708620)
(**) RADEON(0): Read: 0x001c0007 0x00060065 0x00000000
(**) RADEON(0): Read: rd=7, fd=101, pd=6
(**) RADEON(0): RADEONSaveMode returns 0x708620
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x08000000
(**) RADEON(0):   agp_size         : 0x00000381
(**) RADEON(0):   agp_base         : 0x006d4540
(**) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1800x1440     250.00  1800 1896 2088 2392  1440 1441 1444 1490 (24,32) +H +V
1800x1440     250.00  1800 1896 2088 2392  1440 1441 1444 1490 (24,32) +H +V
(**) RADEON(0): Pitch = 15204584 bytes (virtualX = 1800, displayWidth = 1856)
(**) RADEON(0): dc=25000, of=25000, fd=111, pd=1
(**) RADEON(0): RADEONInit returns 0x708fd0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x708fd0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0xd7ffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x0000006f 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=12, fd=111, pd=0
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20577c7c
(**) RADEON(0): RADEONSaveScreen(0)
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(**) RADEON(0): Initializing backing store
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 232
(**) RADEON(0): EngineRestore (32/32)
(**) RADEON(0): Initializing DPMS
(**) RADEON(0): Initializing Cursor
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(**) RADEON(0): RADEONScreenInit finished

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Backtrace:
0: X(xf86SigHandler+0x94) [0x478a64]
1: /lib/tls/libc.so.6 [0x2b44e11ec7f0]
2: /usr/lib64/xorg/modules/input/kbd_drv.so [0x2b44e1e17e93]
3: X(InitInput+0x18f) [0x4602df]
4: X(main+0x353) [0x4329e3]
5: /lib/tls/libc.so.6(__libc_start_main+0xe4) [0x2b44e11da644]
6: X(FontFileCompleteXLFD+0xa2) [0x4320ea]

Fatal server error:
Caught signal 8.  Server aborting

(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x708620)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0x1fff0000
(**) RADEON(0):   MC_AGP_LOCATION  : 0x27ff2000
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x001c0007 0x00060065 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=7, fd=101, pd=6
(**) RADEON(0): Ok, leaving now...
XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"

      after 0 requests (0 known processed) with 0 events remaining.

__________________________________________________________________

The output of

    strace -f -eopen startx

is at:

   http://ms25.ath.cx/strace_x.log
   http://ms25.ath.cx/strace_x.log.bz2

The log file is 800kB while the bz2 version is only 9kB.

Any ideas what is going wrong?

Regards,
  Reinhard

-- 
----------------------------------------------------------------------------
Reinhard Kotucha                                      Phone: +49-511-4592165
Marschnerstr. 25
D-30167 Hannover                              mailto:[EMAIL PROTECTED]
----------------------------------------------------------------------------
Microsoft isn't the answer. Microsoft is the question, and the answer is NO.
----------------------------------------------------------------------------

-- 
gentoo-amd64@gentoo.org mailing list

Reply via email to