commit: 35dbc28470985d7aa32e93128ab88c1bb22c5488
Author: Michał Górny <mgorny <AT> gentoo <DOT> org>
AuthorDate: Sat Aug 1 20:38:12 2020 +0000
Commit: Michał Górny <mgorny <AT> gentoo <DOT> org>
CommitDate: Sat Aug 1 20:40:15 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=35dbc284
www-apps/netbox: Remove old
Acked by William on IRC.
Signed-off-by: Michał Górny <mgorny <AT> gentoo.org>
www-apps/netbox/Manifest | 9 --
www-apps/netbox/files/netbox-2.5.11-no-pip.patch | 27 -----
www-apps/netbox/files/netbox-2.5.12-no-pip.patch | 27 -----
www-apps/netbox/files/netbox-2.6.1-no-pip.patch | 27 -----
www-apps/netbox/files/netbox-2.6.4-no-pip.patch | 21 ----
www-apps/netbox/metadata.xml | 3 -
www-apps/netbox/netbox-2.5.11.ebuild | 123 ----------------------
www-apps/netbox/netbox-2.5.12.ebuild | 123 ----------------------
www-apps/netbox/netbox-2.6.1.ebuild | 126 -----------------------
www-apps/netbox/netbox-2.6.12.ebuild | 123 ----------------------
www-apps/netbox/netbox-2.6.4.ebuild | 126 -----------------------
www-apps/netbox/netbox-2.6.5.ebuild | 126 -----------------------
www-apps/netbox/netbox-2.6.6.ebuild | 126 -----------------------
www-apps/netbox/netbox-2.6.7.ebuild | 126 -----------------------
www-apps/netbox/netbox-2.6.8.ebuild | 126 -----------------------
15 files changed, 1239 deletions(-)
diff --git a/www-apps/netbox/Manifest b/www-apps/netbox/Manifest
index 671b5fa4944..cae76566f50 100644
--- a/www-apps/netbox/Manifest
+++ b/www-apps/netbox/Manifest
@@ -1,12 +1,3 @@
-DIST netbox-2.5.11.tar.gz 2364831 BLAKE2B
e5117b2d4c3f33b231715a8b192e7954dc0611fcb270937c5c8abda3abc9f9925bd7db2c7306847428b5a24014d0c0b07ee404294b389a708d0dc7963c250691
SHA512
dfd19af01bf096ee7d8790981853d7e94d8926a4f0eeb00a061f805d56486670c058752b9a9fb23882b0b8d33e4a2d62f50a35b56c28eb2782be47e6f4b13b7d
-DIST netbox-2.5.12.tar.gz 2364874 BLAKE2B
efe1360fd7c1105e5c6010ee22a882fb4fc796ff0f907974984dba35a0ab6da7724fd6042b102cebe3e3e291c3a1c65c347a5967edbaf443ece6fe61648a93be
SHA512
e105a351f1150139c5bce36527ea650f95504ccc1c7b6a82c41396d69bc8671758cc3b33789c95c81785c5ff54d34c7310cd3e03e65bd006606e85021dcd1795
-DIST netbox-2.6.1.tar.gz 2393902 BLAKE2B
027115458cbb873cb7aa7660a6cd1df46a7768dc05c9280f94c23368336752034b8ede591ed4337f6b65ade1db7fac740533c3c2d932043172cf296ddd2e3f8a
SHA512
8cfe4384ed4ad682ff5268e83d72716230683e86e858c857fd694838227a8b3eddfe02c1fc39b00cb36b33519d8cbb942dd4008544943e8b8f7f2d5904c10e5a
-DIST netbox-2.6.12.tar.gz 2463692 BLAKE2B
38386569b651e516cf587561f06c11be0d0e6bb9b5e664ba2403367693d29961e1379b7b0754bb2379b9af636aba03d8c9d1b611d607a2a234467b25a956bd35
SHA512
9ebb540541401a3e81a10a2345b54053c8bcb73c4e217732b2d07badf40d08bd3600b50ada13e83fdf28db447233d710b4cf0989d978117cd16a1f7220b40e4c
-DIST netbox-2.6.4.tar.gz 2408970 BLAKE2B
47fa3473e893e8443aace8b587df0065a3024a34f9509644deddce7c53e5ac8b3832df55604f3328d699f8f703ae15ad5b52312e1af8fcccabb7cd06377c8a09
SHA512
b137ec7f2d33bb7b48bcb38719ac9ea8cc31d7d38e33cedfb3279b8be2078c9a48ede10db1e4b4cab4a08c77e010060936e445cb6a1d2e6247bcc8d935cc9c3a
-DIST netbox-2.6.5.tar.gz 2408180 BLAKE2B
d119a1bf8256e0d6265eda7122a1d436ecb0e8e640acd12890d242c2c93768b21b5f8ebdbaecdfa31c0eaab0150edf52f08a1f424102fd940dd359bd8eafd4af
SHA512
0b76e5bc3f56effbf7493680d10d549caf36e7769e21a2c24449cbe329379369f3428354c228d0cbbbc153dc62efb5c0e56c4a0d71c99f3267acd2446f48fb8a
-DIST netbox-2.6.6.tar.gz 2414895 BLAKE2B
b27e1bd5bf810627a4ec563b2eb5dbd7c86bf3d98e52555e511ee16492fd96a6cb7604dce8f5954120ab8b3a48d6acf7878721005bcfd2bd9e3880294dfbcd4d
SHA512
9b44442cea1f76cdecb37faee8fe32012b869ff63c1b0bc678d2bb8624851941e9296854a9d85abea24e49a75fd5b31b968e4adbd56e5bc03a1c9f28fc8b846e
-DIST netbox-2.6.7.tar.gz 2416096 BLAKE2B
9c9744b60c3999fa7c3336539937cc20eebac67559444a4512cc4d69e8d38babc147254fd1fc49b8515203a8fd4411bc61c4c30aa3313e1ffe0d0e86abd8c9bb
SHA512
63ed6a95a1f33ee5dd19dc2e43fc5c6aa09979c6f6856b28060992a8aaee956363caf20c48e72884adb84d260669d828311c0cf0d143fc0e58fed9677baf76db
-DIST netbox-2.6.8.tar.gz 2416523 BLAKE2B
1624415302696f47f799f8bd42b827bfdac7866e750ad71cca84a3c095aa39e403036d82257c864f0e4ecc1725087cc1253c73fa26928915e2c53213c3a3852a
SHA512
12a094434c66f954cdd356a41123d5e6c2df8ba9aa846731ee439fd0bf330a003ca4b96c8889aef7be2e551c1d518e96c83182168049a76e9cf4ca3104533280
DIST netbox-2.7.2.tar.gz 4936914 BLAKE2B
905e2667d0637d2edb655efcba1d697eacb097ddd67c8e4586ee2a3ce5a81e4fe98a71f574ae5c732190e03e42fd4cab2f781a30622e79d5e9ea4db7c86de263
SHA512
87753ce955e296d9605e44d5f0df58c14876ca8feda3245dee166fba8a51cbfda7def8da39663570cd0e7c9195cc163d9e877b59027ea1161c7eec33702a3ea4
DIST netbox-2.7.6.tar.gz 4949672 BLAKE2B
1847e5a05493f55ca777737c11b4751bc63183d693f742c7f9b9e5d6a498fe786a60619d40394473488881e6ef922a343cacd796126b8c618158eea9ab26216d
SHA512
065e9c4338fb876ac626f5dec5c98ba2ee798b2fd6d4d8a8d4e57fff4072c649e51a1db633c2718be9ca10b362e7ead9b70655fa77ae6da9f01706e60135e306
DIST netbox-2.7.8.tar.gz 5587481 BLAKE2B
9b524ca7acc1d650402a72aa65f75d7205cf29a3a5cfa9256ff47d12f240fc38903a6db76b8cee2b923947f6e31b124ba0bfdfbf4385fb6fd027634b3b8ba675
SHA512
cce73b9bbd79725e4af01a9265c0a9f14a1ac708186123c1a90f267149157a0c174cd32d5e56875b5fdb55ef87b2ec668ec542b1d3a01256544065d6a0457b54
diff --git a/www-apps/netbox/files/netbox-2.5.11-no-pip.patch
b/www-apps/netbox/files/netbox-2.5.11-no-pip.patch
deleted file mode 100644
index 5d1fa595f4e..00000000000
--- a/www-apps/netbox/files/netbox-2.5.11-no-pip.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff --git a/upgrade.sh b/upgrade.sh
-index 24e79f5b..248e1cb5 100755
---- a/upgrade.sh
-+++ b/upgrade.sh
-@@ -8,22 +8,6 @@
- PYTHON="python3"
- PIP="pip3"
-
--# TODO: Remove this in v2.6 as it is no longer needed under Python 3
--# Delete stale bytecode
--COMMAND="find . -name \"*.pyc\" -delete"
--echo "Cleaning up stale Python bytecode ($COMMAND)..."
--eval $COMMAND
--
--# Uninstall any Python packages which are no longer needed
--COMMAND="${PIP} uninstall -r old_requirements.txt -y"
--echo "Removing old Python packages ($COMMAND)..."
--eval $COMMAND
--
--# Install any new Python packages
--COMMAND="${PIP} install -r requirements.txt --upgrade"
--echo "Updating required Python packages ($COMMAND)..."
--eval $COMMAND
--
- # Apply any database migrations
- COMMAND="${PYTHON} netbox/manage.py migrate"
- echo "Applying database migrations ($COMMAND)..."
diff --git a/www-apps/netbox/files/netbox-2.5.12-no-pip.patch
b/www-apps/netbox/files/netbox-2.5.12-no-pip.patch
deleted file mode 100644
index 5d1fa595f4e..00000000000
--- a/www-apps/netbox/files/netbox-2.5.12-no-pip.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff --git a/upgrade.sh b/upgrade.sh
-index 24e79f5b..248e1cb5 100755
---- a/upgrade.sh
-+++ b/upgrade.sh
-@@ -8,22 +8,6 @@
- PYTHON="python3"
- PIP="pip3"
-
--# TODO: Remove this in v2.6 as it is no longer needed under Python 3
--# Delete stale bytecode
--COMMAND="find . -name \"*.pyc\" -delete"
--echo "Cleaning up stale Python bytecode ($COMMAND)..."
--eval $COMMAND
--
--# Uninstall any Python packages which are no longer needed
--COMMAND="${PIP} uninstall -r old_requirements.txt -y"
--echo "Removing old Python packages ($COMMAND)..."
--eval $COMMAND
--
--# Install any new Python packages
--COMMAND="${PIP} install -r requirements.txt --upgrade"
--echo "Updating required Python packages ($COMMAND)..."
--eval $COMMAND
--
- # Apply any database migrations
- COMMAND="${PYTHON} netbox/manage.py migrate"
- echo "Applying database migrations ($COMMAND)..."
diff --git a/www-apps/netbox/files/netbox-2.6.1-no-pip.patch
b/www-apps/netbox/files/netbox-2.6.1-no-pip.patch
deleted file mode 100644
index 5d1fa595f4e..00000000000
--- a/www-apps/netbox/files/netbox-2.6.1-no-pip.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-diff --git a/upgrade.sh b/upgrade.sh
-index 24e79f5b..248e1cb5 100755
---- a/upgrade.sh
-+++ b/upgrade.sh
-@@ -8,22 +8,6 @@
- PYTHON="python3"
- PIP="pip3"
-
--# TODO: Remove this in v2.6 as it is no longer needed under Python 3
--# Delete stale bytecode
--COMMAND="find . -name \"*.pyc\" -delete"
--echo "Cleaning up stale Python bytecode ($COMMAND)..."
--eval $COMMAND
--
--# Uninstall any Python packages which are no longer needed
--COMMAND="${PIP} uninstall -r old_requirements.txt -y"
--echo "Removing old Python packages ($COMMAND)..."
--eval $COMMAND
--
--# Install any new Python packages
--COMMAND="${PIP} install -r requirements.txt --upgrade"
--echo "Updating required Python packages ($COMMAND)..."
--eval $COMMAND
--
- # Apply any database migrations
- COMMAND="${PYTHON} netbox/manage.py migrate"
- echo "Applying database migrations ($COMMAND)..."
diff --git a/www-apps/netbox/files/netbox-2.6.4-no-pip.patch
b/www-apps/netbox/files/netbox-2.6.4-no-pip.patch
deleted file mode 100644
index ba281aaea5d..00000000000
--- a/www-apps/netbox/files/netbox-2.6.4-no-pip.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-diff --git a/upgrade.sh b/upgrade.sh
-index 793e72cd..8490d713 100755
---- a/upgrade.sh
-+++ b/upgrade.sh
-@@ -10,16 +10,6 @@ cd "$(dirname "$0")"
- PYTHON="python3"
- PIP="pip3"
-
--# Uninstall any Python packages which are no longer needed
--COMMAND="${PIP} uninstall -r old_requirements.txt -y"
--echo "Removing old Python packages ($COMMAND)..."
--eval $COMMAND
--
--# Install any new Python packages
--COMMAND="${PIP} install -r requirements.txt --upgrade"
--echo "Updating required Python packages ($COMMAND)..."
--eval $COMMAND
--
- # Apply any database migrations
- COMMAND="${PYTHON} netbox/manage.py migrate"
- echo "Applying database migrations ($COMMAND)..."
diff --git a/www-apps/netbox/metadata.xml b/www-apps/netbox/metadata.xml
index f53806a2283..c36c37139fa 100644
--- a/www-apps/netbox/metadata.xml
+++ b/www-apps/netbox/metadata.xml
@@ -5,7 +5,4 @@
<email>willi...@gentoo.org</email>
<name>William Hubbs</name>
</maintainer>
- <use>
- <flag name="webhooks">Enable webhooks
via django-rq</flag>
- </use>
</pkgmetadata>
diff --git a/www-apps/netbox/netbox-2.5.11.ebuild
b/www-apps/netbox/netbox-2.5.11.ebuild
deleted file mode 100644
index 64de819ea05..00000000000
--- a/www-apps/netbox/netbox-2.5.11.ebuild
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/digitalocean/netbox";
-SRC_URI="https://github.com/digitalocean/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-2.4.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-1.11[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-0.23.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.14.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-5.3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.7.6.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.7.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- ')
- webhooks? ( dev-python/django-rq )"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${P}-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.5.12.ebuild
b/www-apps/netbox/netbox-2.5.12.ebuild
deleted file mode 100644
index 64de819ea05..00000000000
--- a/www-apps/netbox/netbox-2.5.12.ebuild
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/digitalocean/netbox";
-SRC_URI="https://github.com/digitalocean/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-2.4.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-1.11[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-0.23.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.14.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-5.3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.7.6.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.7.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- ')
- webhooks? ( dev-python/django-rq )"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${P}-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.1.ebuild
b/www-apps/netbox/netbox-2.6.1.ebuild
deleted file mode 100644
index 04c487ccf5f..00000000000
--- a/www-apps/netbox/netbox-2.6.1.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/digitalocean/netbox";
-SRC_URI="https://github.com/digitalocean/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${P}-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.12.ebuild
b/www-apps/netbox/netbox-2.6.12.ebuild
deleted file mode 100644
index d6676c7aca5..00000000000
--- a/www-apps/netbox/netbox-2.6.12.ebuild
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- acct-group/netbox
- acct-user/netbox
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.6.7-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.4.ebuild
b/www-apps/netbox/netbox-2.6.4.ebuild
deleted file mode 100644
index a060ba59442..00000000000
--- a/www-apps/netbox/netbox-2.6.4.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${P}-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.5.ebuild
b/www-apps/netbox/netbox-2.6.5.ebuild
deleted file mode 100644
index c9b078880e5..00000000000
--- a/www-apps/netbox/netbox-2.6.5.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.6.4-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.6.ebuild
b/www-apps/netbox/netbox-2.6.6.ebuild
deleted file mode 100644
index c9b078880e5..00000000000
--- a/www-apps/netbox/netbox-2.6.6.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.0.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.6.4-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.7.ebuild
b/www-apps/netbox/netbox-2.6.7.ebuild
deleted file mode 100644
index 748180d6cc2..00000000000
--- a/www-apps/netbox/netbox-2.6.7.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${P}-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
diff --git a/www-apps/netbox/netbox-2.6.8.ebuild
b/www-apps/netbox/netbox-2.6.8.ebuild
deleted file mode 100644
index 233c4920008..00000000000
--- a/www-apps/netbox/netbox-2.6.8.ebuild
+++ /dev/null
@@ -1,126 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-PYTHON_COMPAT=( python3_6 )
-inherit python-single-r1 user readme.gentoo-r1
-
-DESCRIPTION="IP address and data center infrastructure management tool"
-HOMEPAGE="https://github.com/netbox-community/netbox";
-SRC_URI="https://github.com/netbox-community/${PN}/archive/v${PV}.tar.gz ->
${P}.tar.gz"
-
-LICENSE="Apache-2.0"
-SLOT="0"
-KEYWORDS="~amd64"
-IUSE="ldap webhooks"
-REQUIRED_USE=${PYTHON_REQUIRED_USE}
-
-RDEPEND="
- ${PYTHON_DEPS}
- $(python_gen_cond_dep '
- >=dev-python/django-2.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cacheops-4.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-cors-headers-3.0.2[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-debug-toolbar-2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-filter-2.1.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-mptt-0.9.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-prometheus-1.0.15[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-tables2-2.0.6[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-taggit-1.1.0[${PYTHON_MULTI_USEDEP}]
-
>=dev-python/django-taggit-serializer-0.1.7[${PYTHON_MULTI_USEDEP}]
- >=dev-python/django-timezone-field-3.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/djangorestframework-3.9.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/drf-yasg-1.16.0[${PYTHON_MULTI_USEDEP},validation]
- >=dev-python/graphviz-0.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/jinja-2.10.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/markdown-2.6.11[${PYTHON_MULTI_USEDEP}]
- <dev-python/markdown-3.0.1[${PYTHON_MULTI_USEDEP}]
- >=dev-python/netaddr-0.7.19[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pillow-6.2.0[${PYTHON_MULTI_USEDEP}]
- >=dev-python/psycopg-2.8.3[${PYTHON_MULTI_USEDEP}]
- >=dev-python/py-gfm-0.1.4[${PYTHON_MULTI_USEDEP}]
- >=dev-python/pycryptodome-3.8.2[${PYTHON_MULTI_USEDEP}]
- www-servers/gunicorn[${PYTHON_MULTI_USEDEP}]
- ldap? (
>=dev-python/django-auth-ldap-1.7[${PYTHON_MULTI_USEDEP}] )
- webhooks? (
>=dev-python/django-rq-2.1.0[${PYTHON_MULTI_USEDEP}] )
- ')"
-DEPEND="${RDEPEND}"
-
-PATCHES=(
- "${FILESDIR}"/${PN}-2.6.7-no-pip.patch
- )
-
-DISABLE_AUTOFORMATTING=YES
-DOC_CONTENTS="
-netbox is installed on your system. However, there are some manual steps
-you need to complete from the installation guide [1].
-
-On Gentoo, the configuration files you need to edit are located in
-/etc/netbox, not /opt/netbox as shown in the installation guide.
-
-If this is a new installation, please follow the installation guide
-other than this difference. Also, if you need ldap or webhooks, set the
-appropriate use flags when you emerge netbox to install the
-dependencies.
-
-Once that is done, you should be able to add the netbox service to the
-default runlevel and start it.
-
-If you have webhooks turned on, you should also add the netbox-rqworker
-service to the default runlevel and start it.
-
-If this is an upgrade, follow these instructions:
-
-Stop the netbox service. If the netbox-rqworker service is running,
-stop it as well.
-
-Next, run the upgrade script as described in the upgrading guide[2].
-
-Next, check for new configuration options and set them as appropriate
-for your system.
-
-Next, start the netbox service.
-
-Finally, if you are using webhooks, start the netbox-rqworker service.
-
-[1] https://netbox.readthedocs.io/en/stable/installation/
-[2] https://netbox.readthedocs.io/en/stable/installation/upgrading/
-"
-
-pkg_setup() {
- enewgroup ${PN}
- enewuser ${PN} -1 -1 /var/lib/${PN} ${PN}
-}
-
-src_install() {
- dodir /opt
- cp -a ../${P} "${ED}"/opt
- dosym ${P} /opt/netbox
-dosym ../../etc/netbox/gunicorn_config.py /opt/netbox/gunicorn_config.py
- dosym ../../../../etc/netbox/configuration.py \
- /opt/netbox/netbox/netbox/configuration.py
- dodir /etc/netbox
- insinto /etc/netbox
- newins netbox/netbox/configuration.example.py configuration.py
- doins "${FILESDIR}"/gunicorn_config.py
- fowners -R netbox:netbox /etc/netbox /opt/${P}
- fowners -h netbox:netbox /opt/netbox
- fperms o= /etc/netbox/configuration.py /etc/netbox/gunicorn_config.py
- newinitd "${FILESDIR}"/${PN}.initd ${PN}
- use webhooks &&
- newinitd "${FILESDIR}"/${PN}-rqworker.initd ${PN}-rqworker
- keepdir /var/log/netbox
- fowners -R netbox:netbox /var/log/netbox
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
- local r
- for r in $REPLACING_VERSIONS; do
- if [[ $r = "2.5.10" ]]; then
- ewarn "The home directory of the netbox user is now
/var/lib/netbox"
- ewarn "Please adjust your system."
- fi
- done
-}
