commit: 5543f3de8c9803597c224da00ceee3cdc7f407f4
Author: Hans de Graaff <graaff <AT> gentoo <DOT> org>
AuthorDate: Fri Oct 30 05:18:16 2020 +0000
Commit: Hans de Graaff <graaff <AT> gentoo <DOT> org>
CommitDate: Fri Oct 30 05:18:16 2020 +0000
URL: https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=5543f3de
net-analyzer/munin: cleanup
Package-Manager: Portage-3.0.8, Repoman-3.0.2
Signed-off-by: Hans de Graaff <graaff <AT> gentoo.org>
net-analyzer/munin/Manifest | 8 -
net-analyzer/munin/munin-2.0.52.ebuild | 419 ---------------------------------
net-analyzer/munin/munin-2.0.56.ebuild | 417 --------------------------------
net-analyzer/munin/munin-2.0.61.ebuild | 417 --------------------------------
net-analyzer/munin/munin-2.0.63.ebuild | 417 --------------------------------
5 files changed, 1678 deletions(-)
diff --git a/net-analyzer/munin/Manifest b/net-analyzer/munin/Manifest
index a40b1d5fc74..0bbc42e9d4c 100644
--- a/net-analyzer/munin/Manifest
+++ b/net-analyzer/munin/Manifest
@@ -1,13 +1,5 @@
-DIST munin-2.0.52-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
-DIST munin-2.0.52.tar.gz 2266820 BLAKE2B
41233cd28ce4d682dfd47895061426404540c6b1c65798609a2d509d39ad5359b22087027662e7c03848e5676815843c34d078b782e3d0ab3a6a29b6a22e058b
SHA512
7439ea10006a94227b71328d06411378f6855f23f17815a433b3a1c40ea23da5a25a366d48f911b9cfdc43c4b98f3bb9777b67db2b894441eb8941e84ede379c
-DIST munin-2.0.56-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
-DIST munin-2.0.56.tar.gz 2271203 BLAKE2B
f3df227b905ab794e2253637d367819eff2625f9e0f2355d23916b033b3b23d14bb64a78bf6a334f0c7a1859e60c227d1f754a2689bf291cc5f43a46986d35fe
SHA512
111b9b8d88474f480eac1e304a92a52c2295d72a1c6709bb2942ff6ee0ba26a56d25dc5d0cf08ddb98a23d6d9693ad0cddb2185e10df83d553655d017d102b1d
DIST munin-2.0.59-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
DIST munin-2.0.59.tar.gz 2276011 BLAKE2B
0681cd838daaa056418258d473825642e2aa6b7a3ac7a435859033a467351145be73df327d3149b46c53f5a04c602bea57bc5af428cafb7b5bf1e9c780915ddf
SHA512
5597db797f7a0de3581a17be13b079a3fd1e50903014d67d81a262e921fdfca84eee8ec65e3927438db0e01525d16faaabc7e3f7d4cad1a73e7e14002b10478f
-DIST munin-2.0.61-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
-DIST munin-2.0.61.tar.gz 2254571 BLAKE2B
e73fb6fc4f71c8d56a7e8a05852f699c94a7cf321b8034ad31ccbd06a37a602e6d312c0079fcb31afc5489a265a35a68c037743e01471ca950223d5cb6757b64
SHA512
ea6ae5a7f812985e0179dc2fe2f21136ecf6152ec2adf48d53e4fa19cfc14e74befe56c77a18f27ba966c12034a4fea442d5d1498a7cfe57ed052d332c199019
-DIST munin-2.0.63-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
-DIST munin-2.0.63.tar.gz 2254548 BLAKE2B
5e0aa63222706a1e23bcb2af98437ee8cc3f09cdf833a6546ea40cf7307728518d5d696bd500105f85139753bc17a26dddfb202a661d35a7046ffc55b5b9ef02
SHA512
c28d2bedda8abb8787e1ba40ec80961d1304c903e9e608e30ed7903210169f258f9c062fc97d89932ddd7aabefa4360495d19535520741911c489c9c3c2e76fe
DIST munin-2.0.64-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
DIST munin-2.0.64.tar.gz 2256519 BLAKE2B
6a48327672ab7cf20be7a47d489467d0b888e00c01ca0ce8b0bc47a03b63087cf61de4aaf8ae0f18d8e5ef95c49f85092d719ae7de6fe51bcb5e60d138caa519
SHA512
d5f8fb04a601b053844b04850416f09b9f682b83298e35b973ee495cc60477720dc0483f73809db5ca24ba6b9fa1520f026a3f187db01b0c946cce756e4e401f
DIST munin-2.0.65-gentoo-1.tar.xz 3980 BLAKE2B
5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea
SHA512
b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851
diff --git a/net-analyzer/munin/munin-2.0.52.ebuild
b/net-analyzer/munin/munin-2.0.52.ebuild
deleted file mode 100644
index 56f3cf00bae..00000000000
--- a/net-analyzer/munin/munin-2.0.52.ebuild
+++ /dev/null
@@ -1,419 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit user java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/";
-SRC_URI="
- https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz ->
${P}.tar.gz
- https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz";
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ppc x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test
cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin
directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at
least works.
-DEPEND_COM="
- dev-lang/perl:=[berkdb]
- dev-perl/DBI
- dev-perl/Date-Manip
- dev-perl/File-Copy-Recursive
- dev-perl/List-MoreUtils
- dev-perl/Log-Log4perl
- dev-perl/Net-CIDR
- dev-perl/Net-DNS
- dev-perl/Net-Netmask
- dev-perl/Net-SNMP
- dev-perl/Net-Server[ipv6(-)?]
- virtual/perl-Digest-MD5
- virtual/perl-Getopt-Long
- virtual/perl-MIME-Base64
- virtual/perl-Storable
- virtual/perl-Text-Balanced
- virtual/perl-Time-HiRes
- apache2? (
www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite]
)
- asterisk? ( dev-perl/Net-Telnet )
- cgi? (
- dev-perl/FCGI
- dev-perl/CGI-Fast
- )
- dhcpd? (
- >=net-misc/dhcp-3[server]
- dev-perl/Net-IP
- dev-perl/HTTP-Date
- )
- doc? ( dev-python/sphinx )
- http? ( dev-perl/libwww-perl )
- irc? ( dev-perl/Net-IRC )
- ldap? ( dev-perl/perl-ldap )
- kernel_linux? ( sys-process/procps )
- memcached? ( dev-perl/Cache-Memcached )
- mysql? (
- virtual/mysql
- dev-perl/Cache-Cache
- dev-perl/DBD-mysql
- )
- postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
- ssl? ( dev-perl/Net-SSLeay )
- syslog? ( virtual/perl-Sys-Syslog )
- !minimal? (
- dev-perl/HTML-Template
- dev-perl/IO-Socket-INET6
- dev-perl/URI
- >=net-analyzer/rrdtool-1.3[graph,perl]
- virtual/ssh
- )
- "
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
- dev-perl/Module-Build
- java? ( >=virtual/jdk-1.5 )
- test? (
- dev-perl/Test-Deep
- dev-perl/Test-Exception
- dev-perl/Test-LongString
- dev-perl/Test-Differences
- dev-perl/Test-MockModule
- dev-perl/Test-MockObject
- dev-perl/File-Slurp
- dev-perl/IO-stringy
- dev-perl/IO-Socket-INET6
- )"
-RDEPEND="${DEPEND_COM}
- virtual/awk
- ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
- java? (
- >=virtual/jre-1.5
- || ( net-analyzer/netcat net-analyzer/openbsd-netcat )
- )
- !minimal? (
- virtual/cron
- media-fonts/dejavu
- )
- selinux? ( sec-policy/selinux-munin )
- !<sys-apps/openrc-0.11.8"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- enewgroup munin
- enewuser munin 177 -1 /var/lib/munin munin
- enewuser munin-async -1 /bin/sh /var/spool/munin-async
- esethome munin-async /var/spool/munin-async
- java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
- echo ${PV} > RELEASE || die
-
- eapply "${WORKDIR}"/patches/*.patch
-
- eapply_user
-
- java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
- local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
- use cgi || cgidir="${T}/useless/cgi-bin"
-
- local cgiuser=$(usex apache2 apache munin)
-
- cat >> "${S}"/Makefile.config <<- EOF
- PREFIX=\$(DESTDIR)/usr
- CONFDIR=\$(DESTDIR)/etc/munin
- DOCDIR=${T}/useless/doc
- MANDIR=\$(PREFIX)/share/man
- LIBDIR=\$(PREFIX)/libexec/munin
- HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
- CGIDIR=${cgidir}
- CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
- CGIUSER=${cgiuser}
- DBDIR=\$(DESTDIR)/var/lib/munin
- DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
- SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
- LOGDIR=\$(DESTDIR)/var/log/munin
- PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
- JCVALID=$(usex java yes no)
- STATEDIR=\$(DESTDIR)/run/munin
- EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
- emake -j1
- use doc && emake -C doc html
-}
-
-src_test() {
- if [[ ${EUID} == 0 ]]; then
- eerror "You cannot run tests as root."
- eerror "Please enable FEATURES=userpriv before proceeding."
- return 1
- fi
-
- local testtargets="test-common test-node test-plugins"
- use minimal || testtargets+=" test-master"
-
- LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
- local dirs="
- /var/log/munin
- /var/lib/munin/plugin-state
- /var/lib/munin-node/plugin-state
- /var/www/localhost/htdocs/munin
- /etc/munin/plugin-conf.d
- /etc/munin/plugins"
- use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
- keepdir ${dirs}
- fowners munin:munin ${dirs}
-
- # parallel install doesn't work and it's also pointless to have this
- # run in parallel for now (because it uses internal loops).
- emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal
install-man" install)
-
- # we remove /run from the install, as it's not the package's to deal
- # with.
- rm -rf "${D}"/run || die
-
- # remove the plugins for non-Gentoo package managers; use -f so that
- # it doesn't fail when installing on non-Linux platforms.
- rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
- insinto /etc/munin/plugin-conf.d/
- newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
- newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
- newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
- newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
- dodir /usr/lib/tmpfiles.d
- cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
- d /run/munin 0700 munin munin - -
- EOF
-
- systemd_dounit "${FILESDIR}"/munin-async.service
- systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-node.service
-
- cat >> "${T}"/munin.env <<- EOF
- CONFIG_PROTECT=/var/spool/munin-async/.ssh
- EOF
- newenvd "${T}"/munin.env 50munin
-
- dodoc README ChangeLog INSTALL
- if use doc; then
- cd "${S}"/doc/_build/html || die
- docinto html
- dodoc -r *
- cd "${S}" || die
- fi
-
- dodir /etc/logrotate.d/
- sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
- "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
- dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
- if use syslog; then
- sed -i -e '/log_file/s| .*| Sys::Syslog|' \
- "${D}"/etc/munin/munin-node.conf || die
- fi
-
- # Use a simpler pid file to avoid trouble with /run in tmpfs. The
- # munin-node service is ran as user root, and only later drops
- # privileges.
- sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
- "${D}"/etc/munin/munin-node.conf || die
-
- keepdir /var/spool/munin-async/.ssh
- touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
- fowners munin-async:munin
/var/spool/munin-async{,/.ssh/{,authorized_keys}}
- fperms 0750 /var/spool/munin-async{,/.ssh}
- fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
- if use minimal; then
- # This requires the presence of munin-update, which is part of
- # the non-minimal install...
- rm "${D}"/usr/libexec/munin/plugins/munin_stats
- else
- # remove font files so that we don't have to keep them around
- rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
- if use cgi; then
- sed -i -e '/#graph_strategy cgi/s:^#::'
"${D}"/etc/munin/munin.conf || die
-
- keepdir /var/cache/munin-cgi
- touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
- fowners $(usex apache2 apache munin) \
- /var/cache/munin-cgi \
- /var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- insinto /etc/apache2/vhosts.d
- newins "${FILESDIR}"/munin.apache.include
munin.include
- newins "${FILESDIR}"/munin.apache.include-2.4
munin-2.4.include
- fi
- else
- sed \
- -e '/#graph_strategy cgi/s:#graph_strategy
cgi:graph_strategy cron:' \
- -i "${D}"/etc/munin/munin.conf || die
- fi
-
- keepdir /var/lib/munin/.ssh
- cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
- IdentityFile /var/lib/munin/.ssh/id_ecdsa
- IdentityFile /var/lib/munin/.ssh/id_rsa
- EOF
-
- fowners munin:munin /var/lib/munin/.ssh/{,config}
- fperms go-rwx /var/lib/munin/.ssh/{,config}
-
- dodir /usr/share/${PN}
- cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
- # Force the shell to bash
- SHELL=/bin/bash
- # Mail reports to root@, not munin@
- MAILTO=root
-
- # This runs the munin task every 5 minutes.
- */5 * * * * /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #*/1 * * * * /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #*/2 * * * * /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #*/5 * * * * nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #*/15 * * * * nice /usr/libexec/munin/munin-html
- EOF
-
- cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
- # Mail reports to root@, not munin@, only execute one at a time
- !mailto(root),serial(true)
-
- # This runs the munin task every 5 minutes.
- @ 5 /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #@ 1 /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #@ 2 /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #@ 5 nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #@ 15 nice /usr/libexec/munin/munin-html
- EOF
-
- # remove .htaccess file
- find "${D}" -name .htaccess -delete || die
- fi
-}
-
-pkg_config() {
- if use minimal; then
- einfo "Nothing to do."
- return 0
- fi
-
- einfo "Press enter to install the default crontab for the munin master"
- einfo "installation from /usr/share/${PN}/f?crontab"
- einfo "If you have a large site, you may wish to customize it."
- read
-
- ebegin "Setting up cron ..."
- if has_version sys-process/fcron; then
- fcrontab - -u munin < /usr/share/${PN}/fcrontab
- else
- # dcron is very fussy about syntax
- # the following is the only form that works in BOTH dcron and
vixie-cron
- crontab - -u munin < /usr/share/${PN}/crontab
- fi
- eend $?
-
- einfo "Press enter to set up the SSH keys used for SSH transport"
- read
-
- # generate one rsa (for legacy) and one ecdsa (for new systems)
- ssh-keygen -t rsa \
- -f /var/lib/munin/.ssh/id_rsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- ssh-keygen -t ecdsa \
- -f /var/lib/munin/.ssh/id_ecdsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- chown -R munin:munin /var/lib/munin/.ssh || die
- chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
- einfo "Your public keys are available in "
- einfo " /var/lib/munin/.ssh/id_rsa.pub"
- einfo " /var/lib/munin/.ssh/id_ecdsa.pub"
- einfo "and follows for convenience"
- echo
- cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
- elog "Please follow the munin documentation to set up the plugins you"
- elog "need, afterwards start munin-node."
- elog ""
- elog "To make use of munin-async, make sure to set up the corresponding"
- elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
- elog ""
- if ! use minimal; then
- elog "Please run"
- elog " emerge --config net-analyzer/munin"
- elog "to automatically configure munin's cronjobs as well as
generate"
- elog "passwordless SSH keys to be used with munin-async."
- fi
- elog ""
- elog "Further information about setting up Munin in Gentoo can be found"
- elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin";
-
- if use cgi; then
- chown $(usex apache2 apache munin) \
- "${ROOT}"/var/cache/munin-cgi \
- "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- elog "To use Munin with CGI you should include
/etc/apache2/vhosts.d/munin.include"
- elog "or /etc/apache2/vhosts.d/munin-2.4.include (for
Apache 2.4) from the virtual"
- elog "host you want it to be served."
- elog "If you want to enable CGI-based HTML as well, you
have to add to"
- elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
- else
- elog "Effective CGI support has just been added in
2.0.7-r6."
- elog "Documentation on how to use it is still sparse."
- fi
- fi
-
- # we create this here as we don't want Portage to check /run
- # symlinks but we still need this to be present before the reboot.
- if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
- mkdir "${ROOT}"/run/munin
- chown munin:munin "${ROOT}"/run/munin
- chmod 0700 "${ROOT}"/run/munin
- fi
-}
diff --git a/net-analyzer/munin/munin-2.0.56.ebuild
b/net-analyzer/munin/munin-2.0.56.ebuild
deleted file mode 100644
index 500c7e3caf5..00000000000
--- a/net-analyzer/munin/munin-2.0.56.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/";
-SRC_URI="
- https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz ->
${P}.tar.gz
- https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz";
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~ppc x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test
cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin
directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at
least works.
-DEPEND_COM="
- acct-user/munin
- acct-user/munin-async
- acct-group/munin
- dev-lang/perl:=[berkdb]
- dev-perl/DBI
- dev-perl/Date-Manip
- dev-perl/File-Copy-Recursive
- dev-perl/List-MoreUtils
- dev-perl/Log-Log4perl
- dev-perl/Net-CIDR
- dev-perl/Net-DNS
- dev-perl/Net-Netmask
- dev-perl/Net-SNMP
- dev-perl/Net-Server[ipv6(-)?]
- virtual/perl-Digest-MD5
- virtual/perl-Getopt-Long
- virtual/perl-MIME-Base64
- virtual/perl-Storable
- virtual/perl-Text-Balanced
- virtual/perl-Time-HiRes
- apache2? (
www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite]
)
- asterisk? ( dev-perl/Net-Telnet )
- cgi? (
- dev-perl/FCGI
- dev-perl/CGI-Fast
- )
- dhcpd? (
- >=net-misc/dhcp-3[server]
- dev-perl/Net-IP
- dev-perl/HTTP-Date
- )
- doc? ( dev-python/sphinx )
- http? ( dev-perl/libwww-perl )
- irc? ( dev-perl/Net-IRC )
- ldap? ( dev-perl/perl-ldap )
- kernel_linux? ( sys-process/procps )
- memcached? ( dev-perl/Cache-Memcached )
- mysql? (
- virtual/mysql
- dev-perl/Cache-Cache
- dev-perl/DBD-mysql
- )
- postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
- ssl? ( dev-perl/Net-SSLeay )
- syslog? ( virtual/perl-Sys-Syslog )
- !minimal? (
- dev-perl/HTML-Template
- dev-perl/IO-Socket-INET6
- dev-perl/URI
- >=net-analyzer/rrdtool-1.3[graph,perl]
- virtual/ssh
- )
- "
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
- dev-perl/Module-Build
- java? ( >=virtual/jdk-1.5 )
- test? (
- dev-perl/Test-Deep
- dev-perl/Test-Exception
- dev-perl/Test-LongString
- dev-perl/Test-Differences
- dev-perl/Test-MockModule
- dev-perl/Test-MockObject
- dev-perl/File-Slurp
- dev-perl/IO-stringy
- dev-perl/IO-Socket-INET6
- )"
-RDEPEND="${DEPEND_COM}
- virtual/awk
- ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
- java? (
- >=virtual/jre-1.5
- || ( net-analyzer/netcat net-analyzer/openbsd-netcat )
- )
- !minimal? (
- virtual/cron
- media-fonts/dejavu
- )
- selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
- echo ${PV} > RELEASE || die
-
- eapply "${WORKDIR}"/patches/*.patch
-
- eapply_user
-
- java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
- local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
- use cgi || cgidir="${T}/useless/cgi-bin"
-
- local cgiuser=$(usex apache2 apache munin)
-
- cat >> "${S}"/Makefile.config <<- EOF
- PREFIX=\$(DESTDIR)/usr
- CONFDIR=\$(DESTDIR)/etc/munin
- DOCDIR=${T}/useless/doc
- MANDIR=\$(PREFIX)/share/man
- LIBDIR=\$(PREFIX)/libexec/munin
- HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
- CGIDIR=${cgidir}
- CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
- CGIUSER=${cgiuser}
- DBDIR=\$(DESTDIR)/var/lib/munin
- DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
- SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
- LOGDIR=\$(DESTDIR)/var/log/munin
- PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
- JCVALID=$(usex java yes no)
- STATEDIR=\$(DESTDIR)/run/munin
- EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
- emake -j1
- use doc && emake -C doc html
-}
-
-src_test() {
- if [[ ${EUID} == 0 ]]; then
- eerror "You cannot run tests as root."
- eerror "Please enable FEATURES=userpriv before proceeding."
- return 1
- fi
-
- local testtargets="test-common test-node test-plugins"
- use minimal || testtargets+=" test-master"
-
- LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
- local dirs="
- /var/log/munin
- /var/lib/munin/plugin-state
- /var/lib/munin-node/plugin-state
- /var/www/localhost/htdocs/munin
- /etc/munin/plugin-conf.d
- /etc/munin/plugins"
- use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
- keepdir ${dirs}
- fowners munin:munin ${dirs}
-
- # parallel install doesn't work and it's also pointless to have this
- # run in parallel for now (because it uses internal loops).
- emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal
install-man" install)
-
- # we remove /run from the install, as it's not the package's to deal
- # with.
- rm -rf "${D}"/run || die
-
- # remove the plugins for non-Gentoo package managers; use -f so that
- # it doesn't fail when installing on non-Linux platforms.
- rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
- insinto /etc/munin/plugin-conf.d/
- newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
- newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
- newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
- newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
- dodir /usr/lib/tmpfiles.d
- cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
- d /run/munin 0700 munin munin - -
- EOF
-
- systemd_dounit "${FILESDIR}"/munin-async.service
- systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-node.service
-
- cat >> "${T}"/munin.env <<- EOF
- CONFIG_PROTECT=/var/spool/munin-async/.ssh
- EOF
- newenvd "${T}"/munin.env 50munin
-
- dodoc README ChangeLog INSTALL
- if use doc; then
- cd "${S}"/doc/_build/html || die
- docinto html
- dodoc -r *
- cd "${S}" || die
- fi
-
- dodir /etc/logrotate.d/
- sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
- "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
- dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
- if use syslog; then
- sed -i -e '/log_file/s| .*| Sys::Syslog|' \
- "${D}"/etc/munin/munin-node.conf || die
- fi
-
- # Use a simpler pid file to avoid trouble with /run in tmpfs. The
- # munin-node service is ran as user root, and only later drops
- # privileges.
- sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
- "${D}"/etc/munin/munin-node.conf || die
-
- keepdir /var/spool/munin-async/.ssh
- touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
- fowners munin-async:munin
/var/spool/munin-async{,/.ssh/{,authorized_keys}}
- fperms 0750 /var/spool/munin-async{,/.ssh}
- fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
- if use minimal; then
- # This requires the presence of munin-update, which is part of
- # the non-minimal install...
- rm "${D}"/usr/libexec/munin/plugins/munin_stats
- else
- # remove font files so that we don't have to keep them around
- rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
- if use cgi; then
- sed -i -e '/#graph_strategy cgi/s:^#::'
"${D}"/etc/munin/munin.conf || die
-
- keepdir /var/cache/munin-cgi
- touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
- fowners $(usex apache2 apache munin) \
- /var/cache/munin-cgi \
- /var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- insinto /etc/apache2/vhosts.d
- newins "${FILESDIR}"/munin.apache.include
munin.include
- newins "${FILESDIR}"/munin.apache.include-2.4
munin-2.4.include
- fi
- else
- sed \
- -e '/#graph_strategy cgi/s:#graph_strategy
cgi:graph_strategy cron:' \
- -i "${D}"/etc/munin/munin.conf || die
- fi
-
- keepdir /var/lib/munin/.ssh
- cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
- IdentityFile /var/lib/munin/.ssh/id_ecdsa
- IdentityFile /var/lib/munin/.ssh/id_rsa
- EOF
-
- fowners munin:munin /var/lib/munin/.ssh/{,config}
- fperms go-rwx /var/lib/munin/.ssh/{,config}
-
- dodir /usr/share/${PN}
- cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
- # Force the shell to bash
- SHELL=/bin/bash
- # Mail reports to root@, not munin@
- MAILTO=root
-
- # This runs the munin task every 5 minutes.
- */5 * * * * /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #*/1 * * * * /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #*/2 * * * * /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #*/5 * * * * nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #*/15 * * * * nice /usr/libexec/munin/munin-html
- EOF
-
- cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
- # Mail reports to root@, not munin@, only execute one at a time
- !mailto(root),serial(true)
-
- # This runs the munin task every 5 minutes.
- @ 5 /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #@ 1 /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #@ 2 /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #@ 5 nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #@ 15 nice /usr/libexec/munin/munin-html
- EOF
-
- # remove .htaccess file
- find "${D}" -name .htaccess -delete || die
- fi
-}
-
-pkg_config() {
- if use minimal; then
- einfo "Nothing to do."
- return 0
- fi
-
- einfo "Press enter to install the default crontab for the munin master"
- einfo "installation from /usr/share/${PN}/f?crontab"
- einfo "If you have a large site, you may wish to customize it."
- read
-
- ebegin "Setting up cron ..."
- if has_version sys-process/fcron; then
- fcrontab - -u munin < /usr/share/${PN}/fcrontab
- else
- # dcron is very fussy about syntax
- # the following is the only form that works in BOTH dcron and
vixie-cron
- crontab - -u munin < /usr/share/${PN}/crontab
- fi
- eend $?
-
- einfo "Press enter to set up the SSH keys used for SSH transport"
- read
-
- # generate one rsa (for legacy) and one ecdsa (for new systems)
- ssh-keygen -t rsa \
- -f /var/lib/munin/.ssh/id_rsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- ssh-keygen -t ecdsa \
- -f /var/lib/munin/.ssh/id_ecdsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- chown -R munin:munin /var/lib/munin/.ssh || die
- chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
- einfo "Your public keys are available in "
- einfo " /var/lib/munin/.ssh/id_rsa.pub"
- einfo " /var/lib/munin/.ssh/id_ecdsa.pub"
- einfo "and follows for convenience"
- echo
- cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
- elog "Please follow the munin documentation to set up the plugins you"
- elog "need, afterwards start munin-node."
- elog ""
- elog "To make use of munin-async, make sure to set up the corresponding"
- elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
- elog ""
- if ! use minimal; then
- elog "Please run"
- elog " emerge --config net-analyzer/munin"
- elog "to automatically configure munin's cronjobs as well as
generate"
- elog "passwordless SSH keys to be used with munin-async."
- fi
- elog ""
- elog "Further information about setting up Munin in Gentoo can be found"
- elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin";
-
- if use cgi; then
- chown $(usex apache2 apache munin) \
- "${ROOT}"/var/cache/munin-cgi \
- "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- elog "To use Munin with CGI you should include
/etc/apache2/vhosts.d/munin.include"
- elog "or /etc/apache2/vhosts.d/munin-2.4.include (for
Apache 2.4) from the virtual"
- elog "host you want it to be served."
- elog "If you want to enable CGI-based HTML as well, you
have to add to"
- elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
- else
- elog "Effective CGI support has just been added in
2.0.7-r6."
- elog "Documentation on how to use it is still sparse."
- fi
- fi
-
- # we create this here as we don't want Portage to check /run
- # symlinks but we still need this to be present before the reboot.
- if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
- mkdir "${ROOT}"/run/munin
- chown munin:munin "${ROOT}"/run/munin
- chmod 0700 "${ROOT}"/run/munin
- fi
-}
diff --git a/net-analyzer/munin/munin-2.0.61.ebuild
b/net-analyzer/munin/munin-2.0.61.ebuild
deleted file mode 100644
index acaf9f6d9f0..00000000000
--- a/net-analyzer/munin/munin-2.0.61.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/";
-SRC_URI="
- https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz ->
${P}.tar.gz
- https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz";
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test
cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin
directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at
least works.
-DEPEND_COM="
- acct-user/munin
- acct-user/munin-async
- acct-group/munin
- dev-lang/perl:=[berkdb]
- dev-perl/DBI
- dev-perl/Date-Manip
- dev-perl/File-Copy-Recursive
- dev-perl/List-MoreUtils
- dev-perl/Log-Log4perl
- dev-perl/Net-CIDR
- dev-perl/Net-DNS
- dev-perl/Net-Netmask
- dev-perl/Net-SNMP
- dev-perl/Net-Server[ipv6(-)?]
- virtual/perl-Digest-MD5
- virtual/perl-Getopt-Long
- virtual/perl-MIME-Base64
- virtual/perl-Storable
- virtual/perl-Text-Balanced
- virtual/perl-Time-HiRes
- apache2? (
www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite]
)
- asterisk? ( dev-perl/Net-Telnet )
- cgi? (
- dev-perl/FCGI
- dev-perl/CGI-Fast
- )
- dhcpd? (
- >=net-misc/dhcp-3[server]
- dev-perl/Net-IP
- dev-perl/HTTP-Date
- )
- doc? ( dev-python/sphinx )
- http? ( dev-perl/libwww-perl )
- irc? ( dev-perl/Net-IRC )
- ldap? ( dev-perl/perl-ldap )
- kernel_linux? ( sys-process/procps )
- memcached? ( dev-perl/Cache-Memcached )
- mysql? (
- virtual/mysql
- dev-perl/Cache-Cache
- dev-perl/DBD-mysql
- )
- postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
- ssl? ( dev-perl/Net-SSLeay )
- syslog? ( virtual/perl-Sys-Syslog )
- !minimal? (
- dev-perl/HTML-Template
- dev-perl/IO-Socket-INET6
- dev-perl/URI
- >=net-analyzer/rrdtool-1.3[graph,perl]
- virtual/ssh
- )
- "
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
- dev-perl/Module-Build
- java? ( >=virtual/jdk-1.5 )
- test? (
- dev-perl/Test-Deep
- dev-perl/Test-Exception
- dev-perl/Test-LongString
- dev-perl/Test-Differences
- dev-perl/Test-MockModule
- dev-perl/Test-MockObject
- dev-perl/File-Slurp
- dev-perl/IO-stringy
- dev-perl/IO-Socket-INET6
- )"
-RDEPEND="${DEPEND_COM}
- virtual/awk
- ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
- java? (
- >=virtual/jre-1.5
- || ( net-analyzer/netcat net-analyzer/openbsd-netcat )
- )
- !minimal? (
- virtual/cron
- media-fonts/dejavu
- )
- selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
- echo ${PV} > RELEASE || die
-
- eapply "${WORKDIR}"/patches/*.patch
-
- eapply_user
-
- java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
- local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
- use cgi || cgidir="${T}/useless/cgi-bin"
-
- local cgiuser=$(usex apache2 apache munin)
-
- cat >> "${S}"/Makefile.config <<- EOF
- PREFIX=\$(DESTDIR)/usr
- CONFDIR=\$(DESTDIR)/etc/munin
- DOCDIR=${T}/useless/doc
- MANDIR=\$(PREFIX)/share/man
- LIBDIR=\$(PREFIX)/libexec/munin
- HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
- CGIDIR=${cgidir}
- CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
- CGIUSER=${cgiuser}
- DBDIR=\$(DESTDIR)/var/lib/munin
- DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
- SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
- LOGDIR=\$(DESTDIR)/var/log/munin
- PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
- JCVALID=$(usex java yes no)
- STATEDIR=\$(DESTDIR)/run/munin
- EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
- emake -j1
- use doc && emake -C doc html
-}
-
-src_test() {
- if [[ ${EUID} == 0 ]]; then
- eerror "You cannot run tests as root."
- eerror "Please enable FEATURES=userpriv before proceeding."
- return 1
- fi
-
- local testtargets="test-common test-node test-plugins"
- use minimal || testtargets+=" test-master"
-
- LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
- local dirs="
- /var/log/munin
- /var/lib/munin/plugin-state
- /var/lib/munin-node/plugin-state
- /var/www/localhost/htdocs/munin
- /etc/munin/plugin-conf.d
- /etc/munin/plugins"
- use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
- keepdir ${dirs}
- fowners munin:munin ${dirs}
-
- # parallel install doesn't work and it's also pointless to have this
- # run in parallel for now (because it uses internal loops).
- emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal
install-man" install)
-
- # we remove /run from the install, as it's not the package's to deal
- # with.
- rm -rf "${D}"/run || die
-
- # remove the plugins for non-Gentoo package managers; use -f so that
- # it doesn't fail when installing on non-Linux platforms.
- rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
- insinto /etc/munin/plugin-conf.d/
- newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
- newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
- newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
- newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
- dodir /usr/lib/tmpfiles.d
- cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
- d /run/munin 0700 munin munin - -
- EOF
-
- systemd_dounit "${FILESDIR}"/munin-async.service
- systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-node.service
-
- cat >> "${T}"/munin.env <<- EOF
- CONFIG_PROTECT=/var/spool/munin-async/.ssh
- EOF
- newenvd "${T}"/munin.env 50munin
-
- dodoc README ChangeLog INSTALL
- if use doc; then
- cd "${S}"/doc/_build/html || die
- docinto html
- dodoc -r *
- cd "${S}" || die
- fi
-
- dodir /etc/logrotate.d/
- sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
- "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
- dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
- if use syslog; then
- sed -i -e '/log_file/s| .*| Sys::Syslog|' \
- "${D}"/etc/munin/munin-node.conf || die
- fi
-
- # Use a simpler pid file to avoid trouble with /run in tmpfs. The
- # munin-node service is ran as user root, and only later drops
- # privileges.
- sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
- "${D}"/etc/munin/munin-node.conf || die
-
- keepdir /var/spool/munin-async/.ssh
- touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
- fowners munin-async:munin
/var/spool/munin-async{,/.ssh/{,authorized_keys}}
- fperms 0750 /var/spool/munin-async{,/.ssh}
- fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
- if use minimal; then
- # This requires the presence of munin-update, which is part of
- # the non-minimal install...
- rm "${D}"/usr/libexec/munin/plugins/munin_stats
- else
- # remove font files so that we don't have to keep them around
- rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
- if use cgi; then
- sed -i -e '/#graph_strategy cgi/s:^#::'
"${D}"/etc/munin/munin.conf || die
-
- keepdir /var/cache/munin-cgi
- touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
- fowners $(usex apache2 apache munin) \
- /var/cache/munin-cgi \
- /var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- insinto /etc/apache2/vhosts.d
- newins "${FILESDIR}"/munin.apache.include
munin.include
- newins "${FILESDIR}"/munin.apache.include-2.4
munin-2.4.include
- fi
- else
- sed \
- -e '/#graph_strategy cgi/s:#graph_strategy
cgi:graph_strategy cron:' \
- -i "${D}"/etc/munin/munin.conf || die
- fi
-
- keepdir /var/lib/munin/.ssh
- cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
- IdentityFile /var/lib/munin/.ssh/id_ecdsa
- IdentityFile /var/lib/munin/.ssh/id_rsa
- EOF
-
- fowners munin:munin /var/lib/munin/.ssh/{,config}
- fperms go-rwx /var/lib/munin/.ssh/{,config}
-
- dodir /usr/share/${PN}
- cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
- # Force the shell to bash
- SHELL=/bin/bash
- # Mail reports to root@, not munin@
- MAILTO=root
-
- # This runs the munin task every 5 minutes.
- */5 * * * * /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #*/1 * * * * /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #*/2 * * * * /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #*/5 * * * * nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #*/15 * * * * nice /usr/libexec/munin/munin-html
- EOF
-
- cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
- # Mail reports to root@, not munin@, only execute one at a time
- !mailto(root),serial(true)
-
- # This runs the munin task every 5 minutes.
- @ 5 /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #@ 1 /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #@ 2 /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #@ 5 nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #@ 15 nice /usr/libexec/munin/munin-html
- EOF
-
- # remove .htaccess file
- find "${D}" -name .htaccess -delete || die
- fi
-}
-
-pkg_config() {
- if use minimal; then
- einfo "Nothing to do."
- return 0
- fi
-
- einfo "Press enter to install the default crontab for the munin master"
- einfo "installation from /usr/share/${PN}/f?crontab"
- einfo "If you have a large site, you may wish to customize it."
- read
-
- ebegin "Setting up cron ..."
- if has_version sys-process/fcron; then
- fcrontab - -u munin < /usr/share/${PN}/fcrontab
- else
- # dcron is very fussy about syntax
- # the following is the only form that works in BOTH dcron and
vixie-cron
- crontab - -u munin < /usr/share/${PN}/crontab
- fi
- eend $?
-
- einfo "Press enter to set up the SSH keys used for SSH transport"
- read
-
- # generate one rsa (for legacy) and one ecdsa (for new systems)
- ssh-keygen -t rsa \
- -f /var/lib/munin/.ssh/id_rsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- ssh-keygen -t ecdsa \
- -f /var/lib/munin/.ssh/id_ecdsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- chown -R munin:munin /var/lib/munin/.ssh || die
- chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
- einfo "Your public keys are available in "
- einfo " /var/lib/munin/.ssh/id_rsa.pub"
- einfo " /var/lib/munin/.ssh/id_ecdsa.pub"
- einfo "and follows for convenience"
- echo
- cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
- elog "Please follow the munin documentation to set up the plugins you"
- elog "need, afterwards start munin-node."
- elog ""
- elog "To make use of munin-async, make sure to set up the corresponding"
- elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
- elog ""
- if ! use minimal; then
- elog "Please run"
- elog " emerge --config net-analyzer/munin"
- elog "to automatically configure munin's cronjobs as well as
generate"
- elog "passwordless SSH keys to be used with munin-async."
- fi
- elog ""
- elog "Further information about setting up Munin in Gentoo can be found"
- elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin";
-
- if use cgi; then
- chown $(usex apache2 apache munin) \
- "${ROOT}"/var/cache/munin-cgi \
- "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- elog "To use Munin with CGI you should include
/etc/apache2/vhosts.d/munin.include"
- elog "or /etc/apache2/vhosts.d/munin-2.4.include (for
Apache 2.4) from the virtual"
- elog "host you want it to be served."
- elog "If you want to enable CGI-based HTML as well, you
have to add to"
- elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
- else
- elog "Effective CGI support has just been added in
2.0.7-r6."
- elog "Documentation on how to use it is still sparse."
- fi
- fi
-
- # we create this here as we don't want Portage to check /run
- # symlinks but we still need this to be present before the reboot.
- if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
- mkdir "${ROOT}"/run/munin
- chown munin:munin "${ROOT}"/run/munin
- chmod 0700 "${ROOT}"/run/munin
- fi
-}
diff --git a/net-analyzer/munin/munin-2.0.63.ebuild
b/net-analyzer/munin/munin-2.0.63.ebuild
deleted file mode 100644
index acaf9f6d9f0..00000000000
--- a/net-analyzer/munin/munin-2.0.63.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/";
-SRC_URI="
- https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz ->
${P}.tar.gz
- https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz";
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test
cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin
directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at
least works.
-DEPEND_COM="
- acct-user/munin
- acct-user/munin-async
- acct-group/munin
- dev-lang/perl:=[berkdb]
- dev-perl/DBI
- dev-perl/Date-Manip
- dev-perl/File-Copy-Recursive
- dev-perl/List-MoreUtils
- dev-perl/Log-Log4perl
- dev-perl/Net-CIDR
- dev-perl/Net-DNS
- dev-perl/Net-Netmask
- dev-perl/Net-SNMP
- dev-perl/Net-Server[ipv6(-)?]
- virtual/perl-Digest-MD5
- virtual/perl-Getopt-Long
- virtual/perl-MIME-Base64
- virtual/perl-Storable
- virtual/perl-Text-Balanced
- virtual/perl-Time-HiRes
- apache2? (
www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite]
)
- asterisk? ( dev-perl/Net-Telnet )
- cgi? (
- dev-perl/FCGI
- dev-perl/CGI-Fast
- )
- dhcpd? (
- >=net-misc/dhcp-3[server]
- dev-perl/Net-IP
- dev-perl/HTTP-Date
- )
- doc? ( dev-python/sphinx )
- http? ( dev-perl/libwww-perl )
- irc? ( dev-perl/Net-IRC )
- ldap? ( dev-perl/perl-ldap )
- kernel_linux? ( sys-process/procps )
- memcached? ( dev-perl/Cache-Memcached )
- mysql? (
- virtual/mysql
- dev-perl/Cache-Cache
- dev-perl/DBD-mysql
- )
- postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
- ssl? ( dev-perl/Net-SSLeay )
- syslog? ( virtual/perl-Sys-Syslog )
- !minimal? (
- dev-perl/HTML-Template
- dev-perl/IO-Socket-INET6
- dev-perl/URI
- >=net-analyzer/rrdtool-1.3[graph,perl]
- virtual/ssh
- )
- "
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
- dev-perl/Module-Build
- java? ( >=virtual/jdk-1.5 )
- test? (
- dev-perl/Test-Deep
- dev-perl/Test-Exception
- dev-perl/Test-LongString
- dev-perl/Test-Differences
- dev-perl/Test-MockModule
- dev-perl/Test-MockObject
- dev-perl/File-Slurp
- dev-perl/IO-stringy
- dev-perl/IO-Socket-INET6
- )"
-RDEPEND="${DEPEND_COM}
- virtual/awk
- ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
- java? (
- >=virtual/jre-1.5
- || ( net-analyzer/netcat net-analyzer/openbsd-netcat )
- )
- !minimal? (
- virtual/cron
- media-fonts/dejavu
- )
- selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
- java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
- echo ${PV} > RELEASE || die
-
- eapply "${WORKDIR}"/patches/*.patch
-
- eapply_user
-
- java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
- local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
- use cgi || cgidir="${T}/useless/cgi-bin"
-
- local cgiuser=$(usex apache2 apache munin)
-
- cat >> "${S}"/Makefile.config <<- EOF
- PREFIX=\$(DESTDIR)/usr
- CONFDIR=\$(DESTDIR)/etc/munin
- DOCDIR=${T}/useless/doc
- MANDIR=\$(PREFIX)/share/man
- LIBDIR=\$(PREFIX)/libexec/munin
- HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
- CGIDIR=${cgidir}
- CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
- CGIUSER=${cgiuser}
- DBDIR=\$(DESTDIR)/var/lib/munin
- DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
- SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
- LOGDIR=\$(DESTDIR)/var/log/munin
- PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
- JCVALID=$(usex java yes no)
- STATEDIR=\$(DESTDIR)/run/munin
- EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
- emake -j1
- use doc && emake -C doc html
-}
-
-src_test() {
- if [[ ${EUID} == 0 ]]; then
- eerror "You cannot run tests as root."
- eerror "Please enable FEATURES=userpriv before proceeding."
- return 1
- fi
-
- local testtargets="test-common test-node test-plugins"
- use minimal || testtargets+=" test-master"
-
- LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
- local dirs="
- /var/log/munin
- /var/lib/munin/plugin-state
- /var/lib/munin-node/plugin-state
- /var/www/localhost/htdocs/munin
- /etc/munin/plugin-conf.d
- /etc/munin/plugins"
- use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
- keepdir ${dirs}
- fowners munin:munin ${dirs}
-
- # parallel install doesn't work and it's also pointless to have this
- # run in parallel for now (because it uses internal loops).
- emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal
install-man" install)
-
- # we remove /run from the install, as it's not the package's to deal
- # with.
- rm -rf "${D}"/run || die
-
- # remove the plugins for non-Gentoo package managers; use -f so that
- # it doesn't fail when installing on non-Linux platforms.
- rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
- insinto /etc/munin/plugin-conf.d/
- newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
- newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
- newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
- newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
- dodir /usr/lib/tmpfiles.d
- cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
- d /run/munin 0700 munin munin - -
- EOF
-
- systemd_dounit "${FILESDIR}"/munin-async.service
- systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
- systemd_dounit "${FILESDIR}"/munin-node.service
-
- cat >> "${T}"/munin.env <<- EOF
- CONFIG_PROTECT=/var/spool/munin-async/.ssh
- EOF
- newenvd "${T}"/munin.env 50munin
-
- dodoc README ChangeLog INSTALL
- if use doc; then
- cd "${S}"/doc/_build/html || die
- docinto html
- dodoc -r *
- cd "${S}" || die
- fi
-
- dodir /etc/logrotate.d/
- sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
- "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
- dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
- if use syslog; then
- sed -i -e '/log_file/s| .*| Sys::Syslog|' \
- "${D}"/etc/munin/munin-node.conf || die
- fi
-
- # Use a simpler pid file to avoid trouble with /run in tmpfs. The
- # munin-node service is ran as user root, and only later drops
- # privileges.
- sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
- "${D}"/etc/munin/munin-node.conf || die
-
- keepdir /var/spool/munin-async/.ssh
- touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
- fowners munin-async:munin
/var/spool/munin-async{,/.ssh/{,authorized_keys}}
- fperms 0750 /var/spool/munin-async{,/.ssh}
- fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
- if use minimal; then
- # This requires the presence of munin-update, which is part of
- # the non-minimal install...
- rm "${D}"/usr/libexec/munin/plugins/munin_stats
- else
- # remove font files so that we don't have to keep them around
- rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
- if use cgi; then
- sed -i -e '/#graph_strategy cgi/s:^#::'
"${D}"/etc/munin/munin.conf || die
-
- keepdir /var/cache/munin-cgi
- touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
- fowners $(usex apache2 apache munin) \
- /var/cache/munin-cgi \
- /var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- insinto /etc/apache2/vhosts.d
- newins "${FILESDIR}"/munin.apache.include
munin.include
- newins "${FILESDIR}"/munin.apache.include-2.4
munin-2.4.include
- fi
- else
- sed \
- -e '/#graph_strategy cgi/s:#graph_strategy
cgi:graph_strategy cron:' \
- -i "${D}"/etc/munin/munin.conf || die
- fi
-
- keepdir /var/lib/munin/.ssh
- cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
- IdentityFile /var/lib/munin/.ssh/id_ecdsa
- IdentityFile /var/lib/munin/.ssh/id_rsa
- EOF
-
- fowners munin:munin /var/lib/munin/.ssh/{,config}
- fperms go-rwx /var/lib/munin/.ssh/{,config}
-
- dodir /usr/share/${PN}
- cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
- # Force the shell to bash
- SHELL=/bin/bash
- # Mail reports to root@, not munin@
- MAILTO=root
-
- # This runs the munin task every 5 minutes.
- */5 * * * * /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #*/1 * * * * /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #*/2 * * * * /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #*/5 * * * * nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #*/15 * * * * nice /usr/libexec/munin/munin-html
- EOF
-
- cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
- # Mail reports to root@, not munin@, only execute one at a time
- !mailto(root),serial(true)
-
- # This runs the munin task every 5 minutes.
- @ 5 /usr/bin/munin-cron
-
- # Alternatively, this route works differently
- # Update once a minute (for busy sites)
- #@ 1 /usr/libexec/munin/munin-update
- ## Check for limit excess every 2 minutes
- #@ 2 /usr/libexec/munin/munin-limits
- ## Update graphs every 5 minutes
- #@ 5 nice /usr/libexec/munin/munin-graph
- ## Update HTML pages every 15 minutes
- #@ 15 nice /usr/libexec/munin/munin-html
- EOF
-
- # remove .htaccess file
- find "${D}" -name .htaccess -delete || die
- fi
-}
-
-pkg_config() {
- if use minimal; then
- einfo "Nothing to do."
- return 0
- fi
-
- einfo "Press enter to install the default crontab for the munin master"
- einfo "installation from /usr/share/${PN}/f?crontab"
- einfo "If you have a large site, you may wish to customize it."
- read
-
- ebegin "Setting up cron ..."
- if has_version sys-process/fcron; then
- fcrontab - -u munin < /usr/share/${PN}/fcrontab
- else
- # dcron is very fussy about syntax
- # the following is the only form that works in BOTH dcron and
vixie-cron
- crontab - -u munin < /usr/share/${PN}/crontab
- fi
- eend $?
-
- einfo "Press enter to set up the SSH keys used for SSH transport"
- read
-
- # generate one rsa (for legacy) and one ecdsa (for new systems)
- ssh-keygen -t rsa \
- -f /var/lib/munin/.ssh/id_rsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- ssh-keygen -t ecdsa \
- -f /var/lib/munin/.ssh/id_ecdsa -N '' \
- -C "created by portage for ${CATEGORY}/${PN}" || die
- chown -R munin:munin /var/lib/munin/.ssh || die
- chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
- einfo "Your public keys are available in "
- einfo " /var/lib/munin/.ssh/id_rsa.pub"
- einfo " /var/lib/munin/.ssh/id_ecdsa.pub"
- einfo "and follows for convenience"
- echo
- cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
- elog "Please follow the munin documentation to set up the plugins you"
- elog "need, afterwards start munin-node."
- elog ""
- elog "To make use of munin-async, make sure to set up the corresponding"
- elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
- elog ""
- if ! use minimal; then
- elog "Please run"
- elog " emerge --config net-analyzer/munin"
- elog "to automatically configure munin's cronjobs as well as
generate"
- elog "passwordless SSH keys to be used with munin-async."
- fi
- elog ""
- elog "Further information about setting up Munin in Gentoo can be found"
- elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin";
-
- if use cgi; then
- chown $(usex apache2 apache munin) \
- "${ROOT}"/var/cache/munin-cgi \
- "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
- if use apache2; then
- elog "To use Munin with CGI you should include
/etc/apache2/vhosts.d/munin.include"
- elog "or /etc/apache2/vhosts.d/munin-2.4.include (for
Apache 2.4) from the virtual"
- elog "host you want it to be served."
- elog "If you want to enable CGI-based HTML as well, you
have to add to"
- elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
- else
- elog "Effective CGI support has just been added in
2.0.7-r6."
- elog "Documentation on how to use it is still sparse."
- fi
- fi
-
- # we create this here as we don't want Portage to check /run
- # symlinks but we still need this to be present before the reboot.
- if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
- mkdir "${ROOT}"/run/munin
- chown munin:munin "${ROOT}"/run/munin
- chmod 0700 "${ROOT}"/run/munin
- fi
-}
