commit: fa253e9766d67697c3aa792425e49f8f7a0d1b28 Author: Huang Rui <vowstar <AT> gmail <DOT> com> AuthorDate: Wed Sep 7 03:54:59 2022 +0000 Commit: Rui Huang <vowstar <AT> gmail <DOT> com> CommitDate: Wed Sep 7 03:54:59 2022 +0000 URL: https://gitweb.gentoo.org/repo/proj/guru.git/commit/?id=fa253e97
net-print/hpuld: fix 860336,860339 Add missing libusb RDEPEND Closes: https://bugs.gentoo.org/860336 Closes: https://bugs.gentoo.org/860339 Signed-off-by: Huang Rui <vowstar <AT> gmail.com> net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild | 111 +++++++++++++++++++++++ 1 file changed, 111 insertions(+) diff --git a/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild b/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild new file mode 100644 index 000000000..e94749ba6 --- /dev/null +++ b/net-print/hpuld/hpuld-1.00.39.15.00.23-r1.ebuild @@ -0,0 +1,111 @@ +# Copyright 1999-2022 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI="8" + +MY_PV="$(ver_rs 4 _)" +SANE_CONF_DIR="/etc/sane.d" + +DESCRIPTION="HP Unified Linux Driver (for samsung hardware)" +HOMEPAGE="https://support.hp.com"; + +SRC_URI=" + https://ftp.ext.hp.com/pub/softlib/software13/printers/LaserJet/M437_M443/ULDLINUX_HewlettPackard_V${MY_PV}.zip +" + +S="${WORKDIR}/uld" + +LICENSE="all-rights-reserved" +SLOT="0" +KEYWORDS="~amd64 ~arm64 ~mips ~x86" + +IUSE="+scanner" + +RDEPEND=" + dev-libs/libusb + net-print/cups + scanner? ( + media-gfx/sane-backends + ) +" + +DEPEND=" + ${RDEPEND} +" + +BDEPEND=" + app-arch/unzip +" + +# Do not complain about CFLAGS etc since it is binary package +QA_FLAGS_IGNORED=".*" +QA_PRESTRIPPED="${QA_FLAGS_IGNORED}" + +src_unpack() { + default + + for f in ${WORKDIR}/*/*.tar.gz; do + tar -zxf "$f" -C ${WORKDIR} || die + done +} + +src_install() { + export AGREE_EULA="y" + export CONTINUE_INSTALL="y" + export PAGER="$(which cat)" + + # Fix printer install path + sed -i "s#\"/opt\"#\"${D}/opt\"#g" noarch/package_utils || die + sed -i "s#\"/opt\"#\"${D}/opt\"#g" noarch/pre_install.sh || die + sed -i "s#\"\$INSTDIR_CUPS_BACKENDS\"#\"${D}/\$INSTDIR_CUPS_BACKENDS\"#g" noarch/printer.pkg || die + sed -i "s#\"\$INSTDIR_CUPS_FILTERS\"#\"${D}/\$INSTDIR_CUPS_FILTERS\"#g" noarch/printer.pkg || die + sed -i "s#\"\$INSTDIR_CUPS_PPD\"#\"${D}/\$INSTDIR_CUPS_PPD\"#g" noarch/printer-script.pkg || die + sed -i "s#\"\$INSTDIR_LSB_PPD\"#\"${D}/\$INSTDIR_LSB_PPD\"#g" noarch/printer-script.pkg || die + # Not use rpm and dpkg + sed -i "s#which rpm#which not_found_command_${PN}#g" noarch/package_utils || die + sed -i "s#which dpkg#which not_found_command_${PN}#g" noarch/package_utils || die + + # Fix scanner install path + sed -i "s#SANE_DIR=/usr/lib\${LIBSFX}/sane#SANE_DIR=${D}/usr/lib\${LIBSFX}/sane#g" noarch/scanner.pkg || die + sed -i "s#/usr/lib/sane#${D}/usr/lib\${LIBSFX}/sane#g" noarch/scanner.pkg || die + sed -i "s#/usr/share/locale/\$i/LC_MESSAGES/#${D}//usr/share/locale/\$i/LC_MESSAGES#g" noarch/scanner.pkg || die + sed -i "s#\$(sane_config)#${D}/\$(sane_config)#g" noarch/scanner-script.pkg || die + sed -i "s#\$(udev_rules)#${D}/\$(udev_rules)#g" noarch/scanner-script.pkg || die + sed -i "s#\$(hal_rules)#${D}/\$(hal_rules)#g" noarch/scanner-script.pkg || die + sed -i "s#\${USERMAP}#${D}/\${USERMAP}#g" noarch/scanner-script.pkg || die + sed -i "s# trigger_libusbscanner_hotplug##g" noarch/scanner-script.pkg || die + mkdir -p "${D}"/etc/hotplug/usb || die + + if use scanner ; then + echo "# Add support for the HP-ULD specific backend. Needs net-print/hpuld installed." > "${S}"/"${PN}".conf || die + echo "smfp" > "${S}"/"${PN}".conf || die + insinto ${SANE_CONF_DIR}/dll.d + doins "${S}"/"${PN}".conf + + sh ./install.sh || die + fperms 644 /etc/sane.d/smfp-hewlett-packard.conf + else + sh ./install-printer.sh || die + fi +} + +pkg_postinst() { + if use scanner ; then + ewarn "If you want to use the scanner," + ewarn "make sure the smfp is listed in ${SANE_CONF_DIR}/dll.d/"${PN}".conf." + ewarn "If the geniusvp2 is listed in ${SANE_CONF_DIR}/dll.conf," + ewarn "please comment out it." + + ewarn "You should restart cupsd service after installed $P." + ewarn "OpenRC: rc-service cupsd restart" + ewarn "systemd: systemctl restart cups.service" + fi +} + +pkg_postrm() { + if use scanner ; then + ewarn "You should restart cupsd service after removed $P." + ewarn "OpenRC: rc-service cupsd restart" + ewarn "systemd: systemctl restart cups.service" + fi +}
