commit:     ac6e318860d1a3ad84655aaa24fb455f7b092bc0
Author:     Mike Pagano <mpagano <AT> gentoo <DOT> org>
AuthorDate: Wed Sep  6 22:15:50 2023 +0000
Commit:     Mike Pagano <mpagano <AT> gentoo <DOT> org>
CommitDate: Wed Sep  6 22:15:50 2023 +0000
URL:        https://gitweb.gentoo.org/proj/linux-patches.git/commit/?id=ac6e3188

Linux patch 6.1.52

Signed-off-by: Mike Pagano <mpagano <AT> gentoo.org>

 0000_README             |   4 +
 1051_linux-6.1.52.patch | 957 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 961 insertions(+)

diff --git a/0000_README b/0000_README
index 641d98d3..9d50d635 100644
--- a/0000_README
+++ b/0000_README
@@ -247,6 +247,10 @@ Patch:  1050_linux-6.1.51.patch
 From:   https://www.kernel.org
 Desc:   Linux 6.1.51
 
+Patch:  1051_linux-6.1.52.patch
+From:   https://www.kernel.org
+Desc:   Linux 6.1.52
+
 Patch:  1500_XATTR_USER_PREFIX.patch
 From:   https://bugs.gentoo.org/show_bug.cgi?id=470644
 Desc:   Support for namespace user.pax.* on tmpfs.

diff --git a/1051_linux-6.1.52.patch b/1051_linux-6.1.52.patch
new file mode 100644
index 00000000..11ad1175
--- /dev/null
+++ b/1051_linux-6.1.52.patch
@@ -0,0 +1,957 @@
+diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt 
b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+index 0fa8e3e43bf80..1a7e4bff0456f 100644
+--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
++++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+@@ -23,6 +23,9 @@ Optional properties:
+     1 = active low.
+ - irda-mode-ports: An array that lists the indices of the port that
+                  should operate in IrDA mode.
++- nxp,modem-control-line-ports: An array that lists the indices of the port 
that
++                              should have shared GPIO lines configured as
++                              modem control lines.
+ 
+ Example:
+         sc16is750: sc16is750@51 {
+@@ -35,6 +38,26 @@ Example:
+                 #gpio-cells = <2>;
+         };
+ 
++      sc16is752: sc16is752@53 {
++              compatible = "nxp,sc16is752";
++              reg = <0x53>;
++              clocks = <&clk20m>;
++              interrupt-parent = <&gpio3>;
++              interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
++              nxp,modem-control-line-ports = <1>; /* Port 1 as modem control 
lines */
++              gpio-controller; /* Port 0 as GPIOs */
++              #gpio-cells = <2>;
++      };
++
++      sc16is752: sc16is752@54 {
++              compatible = "nxp,sc16is752";
++              reg = <0x54>;
++              clocks = <&clk20m>;
++              interrupt-parent = <&gpio3>;
++              interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
++              nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem 
control lines */
++      };
++
+ * spi as bus
+ 
+ Required properties:
+@@ -59,6 +82,9 @@ Optional properties:
+     1 = active low.
+ - irda-mode-ports: An array that lists the indices of the port that
+                  should operate in IrDA mode.
++- nxp,modem-control-line-ports: An array that lists the indices of the port 
that
++                              should have shared GPIO lines configured as
++                              modem control lines.
+ 
+ Example:
+       sc16is750: sc16is750@0 {
+@@ -70,3 +96,23 @@ Example:
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
++
++      sc16is752: sc16is752@1 {
++              compatible = "nxp,sc16is752";
++              reg = <1>;
++              clocks = <&clk20m>;
++              interrupt-parent = <&gpio3>;
++              interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
++              nxp,modem-control-line-ports = <1>; /* Port 1 as modem control 
lines */
++              gpio-controller; /* Port 0 as GPIOs */
++              #gpio-cells = <2>;
++      };
++
++      sc16is752: sc16is752@2 {
++              compatible = "nxp,sc16is752";
++              reg = <2>;
++              clocks = <&clk20m>;
++              interrupt-parent = <&gpio3>;
++              interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
++              nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem 
control lines */
++      };
+diff --git a/Makefile b/Makefile
+index e7c344d5af156..82aaa3ae7395b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ VERSION = 6
+ PATCHLEVEL = 1
+-SUBLEVEL = 51
++SUBLEVEL = 52
+ EXTRAVERSION =
+ NAME = Curry Ramen
+ 
+diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
+index a829baf8d9226..05c0a0f6fe630 100644
+--- a/arch/arm/mach-pxa/sharpsl_pm.c
++++ b/arch/arm/mach-pxa/sharpsl_pm.c
+@@ -220,8 +220,6 @@ void sharpsl_battery_kick(void)
+ {
+       schedule_delayed_work(&sharpsl_bat, msecs_to_jiffies(125));
+ }
+-EXPORT_SYMBOL(sharpsl_battery_kick);
+-
+ 
+ static void sharpsl_battery_thread(struct work_struct *private_)
+ {
+diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
+index 9964729cd428f..937f56bbaf6c6 100644
+--- a/arch/arm/mach-pxa/spitz.c
++++ b/arch/arm/mach-pxa/spitz.c
+@@ -9,7 +9,6 @@
+  */
+ 
+ #include <linux/kernel.h>
+-#include <linux/module.h>     /* symbol_get ; symbol_put */
+ #include <linux/platform_device.h>
+ #include <linux/delay.h>
+ #include <linux/gpio_keys.h>
+@@ -510,17 +509,6 @@ static struct ads7846_platform_data spitz_ads7846_info = {
+       .wait_for_sync          = spitz_ads7846_wait_for_hsync,
+ };
+ 
+-static void spitz_bl_kick_battery(void)
+-{
+-      void (*kick_batt)(void);
+-
+-      kick_batt = symbol_get(sharpsl_battery_kick);
+-      if (kick_batt) {
+-              kick_batt();
+-              symbol_put(sharpsl_battery_kick);
+-      }
+-}
+-
+ static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
+       .dev_id = "spi2.1",
+       .table = {
+@@ -548,7 +536,7 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+       .max_intensity          = 0x2f,
+       .default_intensity      = 0x1f,
+       .limit_mask             = 0x0b,
+-      .kick_battery           = spitz_bl_kick_battery,
++      .kick_battery           = sharpsl_battery_kick,
+ };
+ 
+ static struct spi_board_info spitz_spi_devices[] = {
+diff --git a/arch/mips/alchemy/devboards/db1000.c 
b/arch/mips/alchemy/devboards/db1000.c
+index 2c52ee27b4f25..50de86eb8784c 100644
+--- a/arch/mips/alchemy/devboards/db1000.c
++++ b/arch/mips/alchemy/devboards/db1000.c
+@@ -14,7 +14,6 @@
+ #include <linux/interrupt.h>
+ #include <linux/leds.h>
+ #include <linux/mmc/host.h>
+-#include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/pm.h>
+ #include <linux/spi/spi.h>
+@@ -167,12 +166,7 @@ static struct platform_device db1x00_audio_dev = {
+ 
+ static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
+ {
+-      void (*mmc_cd)(struct mmc_host *, unsigned long);
+-      /* link against CONFIG_MMC=m */
+-      mmc_cd = symbol_get(mmc_detect_change);
+-      mmc_cd(ptr, msecs_to_jiffies(500));
+-      symbol_put(mmc_detect_change);
+-
++      mmc_detect_change(ptr, msecs_to_jiffies(500));
+       return IRQ_HANDLED;
+ }
+ 
+diff --git a/arch/mips/alchemy/devboards/db1200.c 
b/arch/mips/alchemy/devboards/db1200.c
+index 1864eb935ca57..76080c71a2a7b 100644
+--- a/arch/mips/alchemy/devboards/db1200.c
++++ b/arch/mips/alchemy/devboards/db1200.c
+@@ -10,7 +10,6 @@
+ #include <linux/gpio.h>
+ #include <linux/i2c.h>
+ #include <linux/init.h>
+-#include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/io.h>
+ #include <linux/leds.h>
+@@ -340,14 +339,7 @@ static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
+ 
+ static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
+ {
+-      void (*mmc_cd)(struct mmc_host *, unsigned long);
+-
+-      /* link against CONFIG_MMC=m */
+-      mmc_cd = symbol_get(mmc_detect_change);
+-      if (mmc_cd) {
+-              mmc_cd(ptr, msecs_to_jiffies(200));
+-              symbol_put(mmc_detect_change);
+-      }
++      mmc_detect_change(ptr, msecs_to_jiffies(200));
+ 
+       msleep(100);    /* debounce */
+       if (irq == DB1200_SD0_INSERT_INT)
+@@ -431,14 +423,7 @@ static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
+ 
+ static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
+ {
+-      void (*mmc_cd)(struct mmc_host *, unsigned long);
+-
+-      /* link against CONFIG_MMC=m */
+-      mmc_cd = symbol_get(mmc_detect_change);
+-      if (mmc_cd) {
+-              mmc_cd(ptr, msecs_to_jiffies(200));
+-              symbol_put(mmc_detect_change);
+-      }
++      mmc_detect_change(ptr, msecs_to_jiffies(200));
+ 
+       msleep(100);    /* debounce */
+       if (irq == PB1200_SD1_INSERT_INT)
+diff --git a/arch/mips/alchemy/devboards/db1300.c 
b/arch/mips/alchemy/devboards/db1300.c
+index e70e529ddd914..ff61901329c62 100644
+--- a/arch/mips/alchemy/devboards/db1300.c
++++ b/arch/mips/alchemy/devboards/db1300.c
+@@ -17,7 +17,6 @@
+ #include <linux/interrupt.h>
+ #include <linux/ata_platform.h>
+ #include <linux/mmc/host.h>
+-#include <linux/module.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/platnand.h>
+ #include <linux/platform_device.h>
+@@ -459,14 +458,7 @@ static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
+ 
+ static irqreturn_t db1300_mmc_cdfn(int irq, void *ptr)
+ {
+-      void (*mmc_cd)(struct mmc_host *, unsigned long);
+-
+-      /* link against CONFIG_MMC=m.  We can only be called once MMC core has
+-       * initialized the controller, so symbol_get() should always succeed.
+-       */
+-      mmc_cd = symbol_get(mmc_detect_change);
+-      mmc_cd(ptr, msecs_to_jiffies(200));
+-      symbol_put(mmc_detect_change);
++      mmc_detect_change(ptr, msecs_to_jiffies(200));
+ 
+       msleep(100);    /* debounce */
+       if (irq == DB1300_SD1_INSERT_INT)
+diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
+index 795be33f2892d..f19d31ee37ea8 100644
+--- a/drivers/bluetooth/btsdio.c
++++ b/drivers/bluetooth/btsdio.c
+@@ -357,6 +357,7 @@ static void btsdio_remove(struct sdio_func *func)
+       if (!data)
+               return;
+ 
++      cancel_work_sync(&data->work);
+       hdev = data->hdev;
+ 
+       sdio_set_drvdata(func, NULL);
+diff --git a/drivers/firmware/stratix10-svc.c 
b/drivers/firmware/stratix10-svc.c
+index 2d674126160fe..cab11af28c231 100644
+--- a/drivers/firmware/stratix10-svc.c
++++ b/drivers/firmware/stratix10-svc.c
+@@ -756,7 +756,7 @@ svc_create_memory_pool(struct platform_device *pdev,
+       paddr = begin;
+       size = end - begin;
+       va = devm_memremap(dev, paddr, size, MEMREMAP_WC);
+-      if (!va) {
++      if (IS_ERR(va)) {
+               dev_err(dev, "fail to remap shared memory\n");
+               return ERR_PTR(-EINVAL);
+       }
+diff --git a/drivers/fsi/fsi-master-ast-cf.c b/drivers/fsi/fsi-master-ast-cf.c
+index 5f608ef8b53ca..cde281ec89d7b 100644
+--- a/drivers/fsi/fsi-master-ast-cf.c
++++ b/drivers/fsi/fsi-master-ast-cf.c
+@@ -1441,3 +1441,4 @@ static struct platform_driver fsi_master_acf = {
+ 
+ module_platform_driver(fsi_master_acf);
+ MODULE_LICENSE("GPL");
++MODULE_FIRMWARE(FW_FILE_NAME);
+diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h
+index 4da50e19808ef..166a76c9bcad3 100644
+--- a/drivers/hid/wacom.h
++++ b/drivers/hid/wacom.h
+@@ -150,6 +150,7 @@ struct wacom_remote {
+               struct input_dev *input;
+               bool registered;
+               struct wacom_battery battery;
++              ktime_t active_time;
+       } remotes[WACOM_MAX_REMOTES];
+ };
+ 
+diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
+index aff4a21a46b6a..af163e8dfec07 100644
+--- a/drivers/hid/wacom_sys.c
++++ b/drivers/hid/wacom_sys.c
+@@ -2527,6 +2527,18 @@ fail:
+       return;
+ }
+ 
++static void wacom_remote_destroy_battery(struct wacom *wacom, int index)
++{
++      struct wacom_remote *remote = wacom->remote;
++
++      if (remote->remotes[index].battery.battery) {
++              devres_release_group(&wacom->hdev->dev,
++                                   &remote->remotes[index].battery.bat_desc);
++              remote->remotes[index].battery.battery = NULL;
++              remote->remotes[index].active_time = 0;
++      }
++}
++
+ static void wacom_remote_destroy_one(struct wacom *wacom, unsigned int index)
+ {
+       struct wacom_remote *remote = wacom->remote;
+@@ -2541,9 +2553,7 @@ static void wacom_remote_destroy_one(struct wacom 
*wacom, unsigned int index)
+                       remote->remotes[i].registered = false;
+                       spin_unlock_irqrestore(&remote->remote_lock, flags);
+ 
+-                      if (remote->remotes[i].battery.battery)
+-                              devres_release_group(&wacom->hdev->dev,
+-                                                   
&remote->remotes[i].battery.bat_desc);
++                      wacom_remote_destroy_battery(wacom, i);
+ 
+                       if (remote->remotes[i].group.name)
+                               devres_release_group(&wacom->hdev->dev,
+@@ -2551,7 +2561,6 @@ static void wacom_remote_destroy_one(struct wacom 
*wacom, unsigned int index)
+ 
+                       remote->remotes[i].serial = 0;
+                       remote->remotes[i].group.name = NULL;
+-                      remote->remotes[i].battery.battery = NULL;
+                       wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN;
+               }
+       }
+@@ -2636,6 +2645,9 @@ static int wacom_remote_attach_battery(struct wacom 
*wacom, int index)
+       if (remote->remotes[index].battery.battery)
+               return 0;
+ 
++      if (!remote->remotes[index].active_time)
++              return 0;
++
+       if (wacom->led.groups[index].select == WACOM_STATUS_UNKNOWN)
+               return 0;
+ 
+@@ -2651,6 +2663,7 @@ static void wacom_remote_work(struct work_struct *work)
+ {
+       struct wacom *wacom = container_of(work, struct wacom, remote_work);
+       struct wacom_remote *remote = wacom->remote;
++      ktime_t kt = ktime_get();
+       struct wacom_remote_data data;
+       unsigned long flags;
+       unsigned int count;
+@@ -2677,6 +2690,10 @@ static void wacom_remote_work(struct work_struct *work)
+               serial = data.remote[i].serial;
+               if (data.remote[i].connected) {
+ 
++                      if (kt - remote->remotes[i].active_time > 
WACOM_REMOTE_BATTERY_TIMEOUT
++                          && remote->remotes[i].active_time != 0)
++                              wacom_remote_destroy_battery(wacom, i);
++
+                       if (remote->remotes[i].serial == serial) {
+                               wacom_remote_attach_battery(wacom, i);
+                               continue;
+diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
+index 15cd0cabee2a9..c1270db121784 100644
+--- a/drivers/hid/wacom_wac.c
++++ b/drivers/hid/wacom_wac.c
+@@ -1129,6 +1129,7 @@ static int wacom_remote_irq(struct wacom_wac *wacom_wac, 
size_t len)
+       if (index < 0 || !remote->remotes[index].registered)
+               goto out;
+ 
++      remote->remotes[i].active_time = ktime_get();
+       input = remote->remotes[index].input;
+ 
+       input_report_key(input, BTN_0, (data[9] & 0x01));
+diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
+index ee21bb260f22f..2e7cc5e7a0cb7 100644
+--- a/drivers/hid/wacom_wac.h
++++ b/drivers/hid/wacom_wac.h
+@@ -13,6 +13,7 @@
+ #define WACOM_NAME_MAX                64
+ #define WACOM_MAX_REMOTES     5
+ #define WACOM_STATUS_UNKNOWN  255
++#define WACOM_REMOTE_BATTERY_TIMEOUT  21000000000ll
+ 
+ /* packet length for individual models */
+ #define WACOM_PKGLEN_BBFUN     9
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index fb1062a6394c1..9b5a2cb110b3e 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -528,11 +528,12 @@ config MMC_ALCOR
+         of Alcor Micro PCI-E card reader
+ 
+ config MMC_AU1X
+-      tristate "Alchemy AU1XX0 MMC Card Interface support"
++      bool "Alchemy AU1XX0 MMC Card Interface support"
+       depends on MIPS_ALCHEMY
++      depends on MMC=y
+       help
+         This selects the AMD Alchemy(R) Multimedia card interface.
+-        If you have a Alchemy platform with a MMC slot, say Y or M here.
++        If you have a Alchemy platform with a MMC slot, say Y here.
+ 
+         If unsure, say N.
+ 
+diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c 
b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
+index 17c097cef7d45..5243fc0310589 100644
+--- a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
++++ b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
+@@ -8,7 +8,7 @@
+ #include "enetc.h"
+ 
+ int enetc_phc_index = -1;
+-EXPORT_SYMBOL(enetc_phc_index);
++EXPORT_SYMBOL_GPL(enetc_phc_index);
+ 
+ static struct ptp_clock_info enetc_ptp_caps = {
+       .owner          = THIS_MODULE,
+diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c 
b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
+index 68511597599e3..f7d392fce8c28 100644
+--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
++++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
+@@ -465,6 +465,7 @@ void mt76_connac2_mac_write_txwi(struct mt76_dev *dev, 
__le32 *txwi,
+                                   BSS_CHANGED_BEACON_ENABLED));
+       bool inband_disc = !!(changed & (BSS_CHANGED_UNSOL_BCAST_PROBE_RESP |
+                                        BSS_CHANGED_FILS_DISCOVERY));
++      bool amsdu_en = wcid->amsdu;
+ 
+       if (vif) {
+               struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
+@@ -524,12 +525,14 @@ void mt76_connac2_mac_write_txwi(struct mt76_dev *dev, 
__le32 *txwi,
+       txwi[4] = 0;
+ 
+       val = FIELD_PREP(MT_TXD5_PID, pid);
+-      if (pid >= MT_PACKET_ID_FIRST)
++      if (pid >= MT_PACKET_ID_FIRST) {
+               val |= MT_TXD5_TX_STATUS_HOST;
++              amsdu_en = amsdu_en && !is_mt7921(dev);
++      }
+ 
+       txwi[5] = cpu_to_le32(val);
+       txwi[6] = 0;
+-      txwi[7] = wcid->amsdu ? cpu_to_le32(MT_TXD7_HW_AMSDU) : 0;
++      txwi[7] = amsdu_en ? cpu_to_le32(MT_TXD7_HW_AMSDU) : 0;
+ 
+       if (is_8023)
+               mt76_connac2_mac_write_txwi_8023(txwi, skb, wcid);
+diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c 
b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+index 60fbbd1ac2f78..172ba7199485d 100644
+--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
++++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+@@ -1280,7 +1280,7 @@ mt7921_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, 
u32 rx_ant)
+               return -EINVAL;
+ 
+       if ((BIT(hweight8(tx_ant)) - 1) != tx_ant)
+-              tx_ant = BIT(ffs(tx_ant) - 1) - 1;
++              return -EINVAL;
+ 
+       mt7921_mutex_acquire(dev);
+ 
+diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
+index be6838c252f09..2b6d996e393e0 100644
+--- a/drivers/pinctrl/pinctrl-amd.c
++++ b/drivers/pinctrl/pinctrl-amd.c
+@@ -748,7 +748,7 @@ static int amd_pinconf_get(struct pinctrl_dev *pctldev,
+               break;
+ 
+       default:
+-              dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
++              dev_dbg(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
+                       param);
+               return -ENOTSUPP;
+       }
+@@ -798,7 +798,7 @@ static int amd_pinconf_set(struct pinctrl_dev *pctldev, 
unsigned int pin,
+                       break;
+ 
+               default:
+-                      dev_err(&gpio_dev->pdev->dev,
++                      dev_dbg(&gpio_dev->pdev->dev,
+                               "Invalid config param %04x\n", param);
+                       ret = -ENOTSUPP;
+               }
+diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
+index 5db9c737c022f..db7216f14164e 100644
+--- a/drivers/rtc/rtc-ds1685.c
++++ b/drivers/rtc/rtc-ds1685.c
+@@ -1434,7 +1434,7 @@ ds1685_rtc_poweroff(struct platform_device *pdev)
+               unreachable();
+       }
+ }
+-EXPORT_SYMBOL(ds1685_rtc_poweroff);
++EXPORT_SYMBOL_GPL(ds1685_rtc_poweroff);
+ /* ----------------------------------------------------------------------- */
+ 
+ 
+diff --git a/drivers/staging/rtl8712/os_intfs.c 
b/drivers/staging/rtl8712/os_intfs.c
+index 003e972051240..3ea70d042f9a0 100644
+--- a/drivers/staging/rtl8712/os_intfs.c
++++ b/drivers/staging/rtl8712/os_intfs.c
+@@ -323,6 +323,7 @@ int r8712_init_drv_sw(struct _adapter *padapter)
+       mp871xinit(padapter);
+       init_default_value(padapter);
+       r8712_InitSwLeds(padapter);
++      mutex_init(&padapter->mutex_start);
+       return ret;
+ }
+ 
+diff --git a/drivers/staging/rtl8712/usb_intf.c 
b/drivers/staging/rtl8712/usb_intf.c
+index 37364d3101e21..df05213f922f4 100644
+--- a/drivers/staging/rtl8712/usb_intf.c
++++ b/drivers/staging/rtl8712/usb_intf.c
+@@ -567,7 +567,6 @@ static int r871xu_drv_init(struct usb_interface *pusb_intf,
+       if (rtl871x_load_fw(padapter))
+               goto deinit_drv_sw;
+       init_completion(&padapter->rx_filter_ready);
+-      mutex_init(&padapter->mutex_start);
+       return 0;
+ 
+ deinit_drv_sw:
+diff --git a/drivers/tty/serial/qcom_geni_serial.c 
b/drivers/tty/serial/qcom_geni_serial.c
+index 6f6c4e9b77435..d6f682ed15811 100644
+--- a/drivers/tty/serial/qcom_geni_serial.c
++++ b/drivers/tty/serial/qcom_geni_serial.c
+@@ -129,6 +129,7 @@ struct qcom_geni_serial_port {
+       u32 tx_fifo_width;
+       u32 rx_fifo_depth;
+       bool setup;
++      unsigned long clk_rate;
+       int (*handle_rx)(struct uart_port *uport, u32 bytes, bool drop);
+       unsigned int baud;
+       void *rx_fifo;
+@@ -1061,6 +1062,7 @@ static void qcom_geni_serial_set_termios(struct 
uart_port *uport,
+                       baud * sampling_rate, clk_rate, clk_div);
+ 
+       uport->uartclk = clk_rate;
++      port->clk_rate = clk_rate;
+       dev_pm_opp_set_rate(uport->dev, clk_rate);
+       ser_clk_cfg = SER_CLK_EN;
+       ser_clk_cfg |= clk_div << CLK_DIV_SHFT;
+@@ -1330,10 +1332,13 @@ static void qcom_geni_serial_pm(struct uart_port 
*uport,
+ 
+       if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) {
+               geni_icc_enable(&port->se);
++              if (port->clk_rate)
++                      dev_pm_opp_set_rate(uport->dev, port->clk_rate);
+               geni_se_resources_on(&port->se);
+       } else if (new_state == UART_PM_STATE_OFF &&
+                       old_state == UART_PM_STATE_ON) {
+               geni_se_resources_off(&port->se);
++              dev_pm_opp_set_rate(uport->dev, 0);
+               geni_icc_disable(&port->se);
+       }
+ }
+diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
+index 93cf5f7888172..8411a0f312db0 100644
+--- a/drivers/tty/serial/sc16is7xx.c
++++ b/drivers/tty/serial/sc16is7xx.c
+@@ -1345,9 +1345,18 @@ static int sc16is7xx_gpio_direction_output(struct 
gpio_chip *chip,
+               state |= BIT(offset);
+       else
+               state &= ~BIT(offset);
+-      sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
++
++      /*
++       * If we write IOSTATE first, and then IODIR, the output value is not
++       * transferred to the corresponding I/O pin.
++       * The datasheet states that each register bit will be transferred to
++       * the corresponding I/O pin programmed as output when writing to
++       * IOSTATE. Therefore, configure direction first with IODIR, and then
++       * set value after with IOSTATE.
++       */
+       sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
+                             BIT(offset));
++      sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
+ 
+       return 0;
+ }
+@@ -1439,6 +1448,12 @@ static int sc16is7xx_probe(struct device *dev,
+               s->p[i].port.fifosize   = SC16IS7XX_FIFO_SIZE;
+               s->p[i].port.flags      = UPF_FIXED_TYPE | UPF_LOW_LATENCY;
+               s->p[i].port.iobase     = i;
++              /*
++               * Use all ones as membase to make sure uart_configure_port() in
++               * serial_core.c does not abort for SPI/I2C devices where the
++               * membase address is not applicable.
++               */
++              s->p[i].port.membase    = (void __iomem *)~0;
+               s->p[i].port.iotype     = UPIO_PORT;
+               s->p[i].port.uartclk    = freq;
+               s->p[i].port.rs485_config = sc16is7xx_config_rs485;
+diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c 
b/drivers/usb/chipidea/ci_hdrc_imx.c
+index 60b4de0a4f76d..caa91117ba429 100644
+--- a/drivers/usb/chipidea/ci_hdrc_imx.c
++++ b/drivers/usb/chipidea/ci_hdrc_imx.c
+@@ -175,10 +175,12 @@ static struct imx_usbmisc_data 
*usbmisc_get_init_data(struct device *dev)
+       if (of_usb_get_phy_mode(np) == USBPHY_INTERFACE_MODE_ULPI)
+               data->ulpi = 1;
+ 
+-      of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
+-                      &data->emp_curr_control);
+-      of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
+-                      &data->dc_vol_level_adjust);
++      if (of_property_read_u32(np, "samsung,picophy-pre-emp-curr-control",
++                      &data->emp_curr_control))
++              data->emp_curr_control = -1;
++      if (of_property_read_u32(np, "samsung,picophy-dc-vol-level-adjust",
++                      &data->dc_vol_level_adjust))
++              data->dc_vol_level_adjust = -1;
+ 
+       return data;
+ }
+diff --git a/drivers/usb/chipidea/usbmisc_imx.c 
b/drivers/usb/chipidea/usbmisc_imx.c
+index 2318c7906acdb..a2cb4f48c84c6 100644
+--- a/drivers/usb/chipidea/usbmisc_imx.c
++++ b/drivers/usb/chipidea/usbmisc_imx.c
+@@ -657,13 +657,15 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data 
*data)
+                       usbmisc->base + MX7D_USBNC_USB_CTRL2);
+               /* PHY tuning for signal quality */
+               reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1);
+-              if (data->emp_curr_control && data->emp_curr_control <=
++              if (data->emp_curr_control >= 0 &&
++                      data->emp_curr_control <=
+                       (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) {
+                       reg &= ~TXPREEMPAMPTUNE0_MASK;
+                       reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT);
+               }
+ 
+-              if (data->dc_vol_level_adjust && data->dc_vol_level_adjust <=
++              if (data->dc_vol_level_adjust >= 0 &&
++                      data->dc_vol_level_adjust <=
+                       (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) {
+                       reg &= ~TXVREFTUNE0_MASK;
+                       reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT);
+diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c 
b/drivers/usb/dwc3/dwc3-meson-g12a.c
+index eaea944ebd2ce..10298b91731eb 100644
+--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
++++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
+@@ -938,6 +938,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct 
device *dev)
+                       return ret;
+       }
+ 
++      if (priv->drvdata->usb_post_init) {
++              ret = priv->drvdata->usb_post_init(priv);
++              if (ret)
++                      return ret;
++      }
++
+       return 0;
+ }
+ 
+diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
+index 119641761c3b4..f13930b4534c1 100644
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -259,6 +259,7 @@ static void option_instat_callback(struct urb *urb);
+ #define QUECTEL_PRODUCT_EM05G                 0x030a
+ #define QUECTEL_PRODUCT_EM060K                        0x030b
+ #define QUECTEL_PRODUCT_EM05G_CS              0x030c
++#define QUECTEL_PRODUCT_EM05GV2                       0x030e
+ #define QUECTEL_PRODUCT_EM05CN_SG             0x0310
+ #define QUECTEL_PRODUCT_EM05G_SG              0x0311
+ #define QUECTEL_PRODUCT_EM05CN                        0x0312
+@@ -1190,6 +1191,8 @@ static const struct usb_device_id option_ids[] = {
+         .driver_info = RSVD(6) | ZLP },
+       { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 
QUECTEL_PRODUCT_EM05G_GR, 0xff),
+         .driver_info = RSVD(6) | ZLP },
++      { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 
QUECTEL_PRODUCT_EM05GV2, 0xff),
++        .driver_info = RSVD(4) | ZLP },
+       { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 
QUECTEL_PRODUCT_EM05G_CS, 0xff),
+         .driver_info = RSVD(6) | ZLP },
+       { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 
QUECTEL_PRODUCT_EM05G_RS, 0xff),
+@@ -2232,6 +2235,10 @@ static const struct usb_device_id option_ids[] = {
+         .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+       { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),                     
/* Foxconn T99W265 MBIM */
+         .driver_info = RSVD(3) },
++      { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),                     
/* Foxconn T99W368 MBIM */
++        .driver_info = RSVD(3) },
++      { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),                     
/* Foxconn T99W373 MBIM */
++        .driver_info = RSVD(3) },
+       { USB_DEVICE(0x1508, 0x1001),                                           
/* Fibocom NL668 (IOT version) */
+         .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+       { USB_DEVICE(0x1782, 0x4d10) },                                         
/* Fibocom L610 (AT mode) */
+diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
+index 72f8d1e876004..816945913ed0d 100644
+--- a/drivers/usb/typec/tcpm/tcpci.c
++++ b/drivers/usb/typec/tcpm/tcpci.c
+@@ -593,6 +593,10 @@ static int tcpci_init(struct tcpc_dev *tcpc)
+       if (time_after(jiffies, timeout))
+               return -ETIMEDOUT;
+ 
++      ret = tcpci_write16(tcpci, TCPC_FAULT_STATUS, 
TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT);
++      if (ret < 0)
++              return ret;
++
+       /* Handle vendor init */
+       if (tcpci->data->init) {
+               ret = tcpci->data->init(tcpci, tcpci->data);
+diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
+index d5950ef9d1f35..5f45b82dd1914 100644
+--- a/drivers/usb/typec/tcpm/tcpm.c
++++ b/drivers/usb/typec/tcpm/tcpm.c
+@@ -2747,6 +2747,13 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
+                       port->sink_cap_done = true;
+                       tcpm_set_state(port, ready_state(port), 0);
+                       break;
++              /*
++               * Some port partners do not support GET_STATUS, avoid soft 
reset the link to
++               * prevent redundant power re-negotiation
++               */
++              case GET_STATUS_SEND:
++                      tcpm_set_state(port, ready_state(port), 0);
++                      break;
+               case SRC_READY:
+               case SNK_READY:
+                       if (port->vdm_state > VDM_STATE_READY) {
+diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
+index 361f3c29897e8..1b91ac5be9610 100644
+--- a/fs/erofs/zdata.c
++++ b/fs/erofs/zdata.c
+@@ -869,6 +869,8 @@ hitted:
+       cur = end - min_t(erofs_off_t, offset + end - map->m_la, end);
+       if (!(map->m_flags & EROFS_MAP_MAPPED)) {
+               zero_user_segment(page, cur, end);
++              ++spiltted;
++              tight = false;
+               goto next_part;
+       }
+       if (map->m_flags & EROFS_MAP_FRAGMENT) {
+diff --git a/fs/nilfs2/alloc.c b/fs/nilfs2/alloc.c
+index 6ce8617b562d5..7342de296ec3c 100644
+--- a/fs/nilfs2/alloc.c
++++ b/fs/nilfs2/alloc.c
+@@ -205,7 +205,8 @@ static int nilfs_palloc_get_block(struct inode *inode, 
unsigned long blkoff,
+       int ret;
+ 
+       spin_lock(lock);
+-      if (prev->bh && blkoff == prev->blkoff) {
++      if (prev->bh && blkoff == prev->blkoff &&
++          likely(buffer_uptodate(prev->bh))) {
+               get_bh(prev->bh);
+               *bhp = prev->bh;
+               spin_unlock(lock);
+diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
+index d4c0895a88116..f625872321cca 100644
+--- a/fs/nilfs2/inode.c
++++ b/fs/nilfs2/inode.c
+@@ -1025,7 +1025,7 @@ int nilfs_load_inode_block(struct inode *inode, struct 
buffer_head **pbh)
+       int err;
+ 
+       spin_lock(&nilfs->ns_inode_lock);
+-      if (ii->i_bh == NULL) {
++      if (ii->i_bh == NULL || unlikely(!buffer_uptodate(ii->i_bh))) {
+               spin_unlock(&nilfs->ns_inode_lock);
+               err = nilfs_ifile_get_inode_block(ii->i_root->ifile,
+                                                 inode->i_ino, pbh);
+@@ -1034,7 +1034,10 @@ int nilfs_load_inode_block(struct inode *inode, struct 
buffer_head **pbh)
+               spin_lock(&nilfs->ns_inode_lock);
+               if (ii->i_bh == NULL)
+                       ii->i_bh = *pbh;
+-              else {
++              else if (unlikely(!buffer_uptodate(ii->i_bh))) {
++                      __brelse(ii->i_bh);
++                      ii->i_bh = *pbh;
++              } else {
+                       brelse(*pbh);
+                       *pbh = ii->i_bh;
+               }
+diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
+index 21e8260112c8f..a4a147a983e0a 100644
+--- a/fs/nilfs2/segment.c
++++ b/fs/nilfs2/segment.c
+@@ -725,6 +725,11 @@ static size_t nilfs_lookup_dirty_data_buffers(struct 
inode *inode,
+               struct page *page = pvec.pages[i];
+ 
+               lock_page(page);
++              if (unlikely(page->mapping != mapping)) {
++                      /* Exclude pages removed from the address space */
++                      unlock_page(page);
++                      continue;
++              }
+               if (!page_has_buffers(page))
+                       create_empty_buffers(page, i_blocksize(inode), 0);
+               unlock_page(page);
+diff --git a/fs/smb/server/auth.c b/fs/smb/server/auth.c
+index 5e5e120edcc22..15e5684e328c1 100644
+--- a/fs/smb/server/auth.c
++++ b/fs/smb/server/auth.c
+@@ -355,6 +355,9 @@ int ksmbd_decode_ntlmssp_auth_blob(struct 
authenticate_message *authblob,
+               if (blob_len < (u64)sess_key_off + sess_key_len)
+                       return -EINVAL;
+ 
++              if (sess_key_len > CIFS_KEY_SIZE)
++                      return -EINVAL;
++
+               ctx_arc4 = kmalloc(sizeof(*ctx_arc4), GFP_KERNEL);
+               if (!ctx_arc4)
+                       return -ENOMEM;
+diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c
+index 4b210cdd75569..c81aee9ce7ec4 100644
+--- a/fs/smb/server/oplock.c
++++ b/fs/smb/server/oplock.c
+@@ -1492,7 +1492,7 @@ struct create_context *smb2_find_context_vals(void 
*open_req, const char *tag, i
+                   name_len < 4 ||
+                   name_off + name_len > cc_len ||
+                   (value_off & 0x7) != 0 ||
+-                  (value_off && (value_off < name_off + name_len)) ||
++                  (value_len && value_off < name_off + (name_len < 8 ? 8 : 
name_len)) ||
+                   ((u64)value_off + value_len > cc_len))
+                       return ERR_PTR(-EINVAL);
+ 
+diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c
+index f8ca44622d909..9b621fd993bb7 100644
+--- a/fs/smb/server/smb2pdu.c
++++ b/fs/smb/server/smb2pdu.c
+@@ -4322,7 +4322,7 @@ static int smb2_get_ea(struct ksmbd_work *work, struct 
ksmbd_file *fp,
+               if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN))
+                       name_len -= XATTR_USER_PREFIX_LEN;
+ 
+-              ptr = (char *)(&eainfo->name + name_len + 1);
++              ptr = eainfo->name + name_len + 1;
+               buf_free_len -= (offsetof(struct smb2_ea_info, name) +
+                               name_len + 1);
+               /* bailout if xattr can't fit in buf_free_len */
+diff --git a/fs/smb/server/smb2pdu.h b/fs/smb/server/smb2pdu.h
+index dd10f8031606b..665a837378540 100644
+--- a/fs/smb/server/smb2pdu.h
++++ b/fs/smb/server/smb2pdu.h
+@@ -410,7 +410,7 @@ struct smb2_ea_info {
+       __u8   Flags;
+       __u8   EaNameLength;
+       __le16 EaValueLength;
+-      char name[1];
++      char name[];
+       /* optionally followed by value */
+ } __packed; /* level 15 Query */
+ 
+diff --git a/fs/smb/server/transport_rdma.c b/fs/smb/server/transport_rdma.c
+index c06efc020bd95..7578200f63b1d 100644
+--- a/fs/smb/server/transport_rdma.c
++++ b/fs/smb/server/transport_rdma.c
+@@ -1366,24 +1366,35 @@ static int smb_direct_rdma_xmit(struct 
smb_direct_transport *t,
+       LIST_HEAD(msg_list);
+       char *desc_buf;
+       int credits_needed;
+-      unsigned int desc_buf_len;
+-      size_t total_length = 0;
++      unsigned int desc_buf_len, desc_num = 0;
+ 
+       if (t->status != SMB_DIRECT_CS_CONNECTED)
+               return -ENOTCONN;
+ 
++      if (buf_len > t->max_rdma_rw_size)
++              return -EINVAL;
++
+       /* calculate needed credits */
+       credits_needed = 0;
+       desc_buf = buf;
+       for (i = 0; i < desc_len / sizeof(*desc); i++) {
++              if (!buf_len)
++                      break;
++
+               desc_buf_len = le32_to_cpu(desc[i].length);
++              if (!desc_buf_len)
++                      return -EINVAL;
++
++              if (desc_buf_len > buf_len) {
++                      desc_buf_len = buf_len;
++                      desc[i].length = cpu_to_le32(desc_buf_len);
++                      buf_len = 0;
++              }
+ 
+               credits_needed += calc_rw_credits(t, desc_buf, desc_buf_len);
+               desc_buf += desc_buf_len;
+-              total_length += desc_buf_len;
+-              if (desc_buf_len == 0 || total_length > buf_len ||
+-                  total_length > t->max_rdma_rw_size)
+-                      return -EINVAL;
++              buf_len -= desc_buf_len;
++              desc_num++;
+       }
+ 
+       ksmbd_debug(RDMA, "RDMA %s, len %#x, needed credits %#x\n",
+@@ -1395,7 +1406,7 @@ static int smb_direct_rdma_xmit(struct 
smb_direct_transport *t,
+ 
+       /* build rdma_rw_ctx for each descriptor */
+       desc_buf = buf;
+-      for (i = 0; i < desc_len / sizeof(*desc); i++) {
++      for (i = 0; i < desc_num; i++) {
+               msg = kzalloc(offsetof(struct smb_direct_rdma_rw_msg, sg_list) +
+                             sizeof(struct scatterlist) * SG_CHUNK_SIZE, 
GFP_KERNEL);
+               if (!msg) {
+diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h
+index 17657451c762c..77eb40b918d7d 100644
+--- a/include/linux/usb/tcpci.h
++++ b/include/linux/usb/tcpci.h
+@@ -103,6 +103,7 @@
+ #define TCPC_POWER_STATUS_SINKING_VBUS        BIT(0)
+ 
+ #define TCPC_FAULT_STATUS             0x1f
++#define TCPC_FAULT_STATUS_ALL_REG_RST_TO_DEFAULT BIT(7)
+ 
+ #define TCPC_ALERT_EXTENDED           0x21
+ 
+diff --git a/kernel/module/main.c b/kernel/module/main.c
+index 7a6f43d2b7757..7a376e26de85b 100644
+--- a/kernel/module/main.c
++++ b/kernel/module/main.c
+@@ -1214,12 +1214,20 @@ void *__symbol_get(const char *symbol)
+       };
+ 
+       preempt_disable();
+-      if (!find_symbol(&fsa) || strong_try_module_get(fsa.owner)) {
+-              preempt_enable();
+-              return NULL;
++      if (!find_symbol(&fsa))
++              goto fail;
++      if (fsa.license != GPL_ONLY) {
++              pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",
++                      symbol);
++              goto fail;
+       }
++      if (strong_try_module_get(fsa.owner))
++              goto fail;
+       preempt_enable();
+       return (void *)kernel_symbol_value(fsa.sym);
++fail:
++      preempt_enable();
++      return NULL;
+ }
+ EXPORT_SYMBOL_GPL(__symbol_get);
+ 
+diff --git a/sound/usb/stream.c b/sound/usb/stream.c
+index f10f4e6d3fb85..3d4add94e367d 100644
+--- a/sound/usb/stream.c
++++ b/sound/usb/stream.c
+@@ -1093,6 +1093,7 @@ static int __snd_usb_parse_audio_interface(struct 
snd_usb_audio *chip,
+       int i, altno, err, stream;
+       struct audioformat *fp = NULL;
+       struct snd_usb_power_domain *pd = NULL;
++      bool set_iface_first;
+       int num, protocol;
+ 
+       dev = chip->dev;
+@@ -1223,11 +1224,19 @@ static int __snd_usb_parse_audio_interface(struct 
snd_usb_audio *chip,
+                               return err;
+               }
+ 
++              set_iface_first = false;
++              if (protocol == UAC_VERSION_1 ||
++                  (chip->quirk_flags & QUIRK_FLAG_SET_IFACE_FIRST))
++                      set_iface_first = true;
++
+               /* try to set the interface... */
+               usb_set_interface(chip->dev, iface_no, 0);
++              if (set_iface_first)
++                      usb_set_interface(chip->dev, iface_no, altno);
+               snd_usb_init_pitch(chip, fp);
+               snd_usb_init_sample_rate(chip, fp, fp->rate_max);
+-              usb_set_interface(chip->dev, iface_no, altno);
++              if (!set_iface_first)
++                      usb_set_interface(chip->dev, iface_no, altno);
+       }
+       return 0;
+ }


Reply via email to