Hi!
Alon Bar-Lev wrote:
On Wed, Mar 4, 2009 at 10:57 PM, Christoph Spielmann<[email protected]> wrote:
Sure...
1. I think dbus needs to start this, right? Anyway, I start it via the
settings/GSM
Nope dbus starts gsm0710muxd (or should start). Ophonekitd has to be started
with a script. Or manually by calling ophonekitd. freesmartphone-framework
has to be started with the provided init-script. And if you have the correct
settings GSM-subsystem should be started automatically. Could you send me
the log of frameworkd too please?
Attached.
I think i've seen that one before but i can't remember what the problem was
and how it can be fixed.
Hmmm....
can you try the following (with pin disabled):
1. remove frameworkd and everything else connected to openmoko-specific
stuff (gsm0710muxd, gpsd or fso-gpsd) from default runlevel (if you've added
it)
2. install mdbus (http://wiki.openmoko.org/wiki/OpenmokoFramework/mdbus)
2. reboot
3. log in again and check if gsm0710muxd is running
Not running. What should run it other than the init.d script?
You shouldn't start it with the initscript. dbus should start
gsm0710muxd automatically. If it's not started automatically something
is wrong.
4. start frameworkd (you might have to wait a lil, because frameworkd takes
a bit to start up)
OK.
5. execute the following commands and post the output:
mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device
org.freesmartphone.GSM.Device.GetInfo
mdbus -s org.freesmartphone.frameworkd /org/freesmartphone/GSM/Device
org.freesmartphone.GSM.SIM.GetSimInfo
# mdbus -s org.freesmartphone.frameworkd
/org/freesmartphone/GSM/Device org.freesmartphone.GSM.Device.GetInfo
/org/freesmartphone/GSM/Device: GetInfo failed:
org.freesmartphone.Resource.NotEnabled
# mdbus -s org.freesmartphone.frameworkd
/org/freesmartphone/GSM/Device org.freesmartphone.GSM.SIM.GetSimInfo
/org/freesmartphone/GSM/Device: GetSimInfo failed:
org.freesmartphone.Resource.NotEnabled
Even if i start gsm0710muxd it stays this way, also if I power_on the device.
That's the problem. Again gsm0710mux should get started automatically.
If it's not started automatically by dbus you can do what you want and
you won't get it to work. Believe me i had the same problem. Do you have
the following file installed:
/usr/armv4tl-softfloat-linux-gnueabi/usr/share/dbus-1/system-services/org.pyneo.muxer.service?
Usually this file should get installed by gsm0710muxd. I "solved" the
problem by completely removing ALL python-packages (including python
itself), deleting /usr/armv4tl-softfloat-linux-gnueabi/usr/lib/python2.5
and reinstall everything. After this procedure everything was working as
expected.
There is not much documentation for shr (or I could not find ones), does
anyone know a good resource?
I'm afraid there is no such thing as good documentation about shr... I made
things work by using trial and error, reading mailing list archives and look
through the tickets. In my case most things work now (phone, sms, suspend
and resume...) Things i know that are not working are pyphonelog which just
displays garbage here and shr-settings is umm very picky about what does and
what doesn't work.
Thanks for your help!!!
What are me other alternatives? If SHR does not work, is there any other
solution I can use, maybe something simpler? zhone does not work either,
guess it needs ophonekitd too.
Nope zhone needs just freesmartphone-framework and as that's not working
correctly zhone can't work. There are other alternatives (e.g. the stuff
provided by hackable:1 sounds interesting) but we concentrate on
freesmartphone-framework at the moment but feel free to try other stuff.
I guess nobody would complain about having alternatives.
Thanks!
No problem. After all we are one big gentoo-family, aren't we ;)
Christoph
Alon.
