On 12/20/2014 01:44 PM, Ed W wrote:
On 19/11/2014 22:05, Jean-Marc Beaune wrote:
Hi,
Re-installing Gentoo on this platform because I haven't upgraded it
for more than two years... :-/
Grub boots and loads the kernel but hangs after this line:
Loading Linux 3.16.5-gentoo ...
Just for a quick test, try this (if applicable).
"cp /boot/System.map / "
Unless it is already in the / dir.
I uncommented serial console in inittab so I can follow boot via console.
Any idea how I can get more debug information?
Thank you
Wow, quite late to this party....
I can trigger the same in an Alix, which is quite a different board, but
might be relevant. Check the SATA module included. In particular
beware that certain combinations of GPIO modules seem to bollox the SATA
module (GPIO-Keys in particular, not sure why)
Could be completely unrelated, but this is what kills my CS5335 based
stuff on ALIX...
I have an old Alix board (alix.2D3+B) that has not been used in a few
years. Drop me some private email, as I think this list is dead.
My speculation is after the gentoo herds are gone, may then we can
resurrect the gentoo-embedded project discussion group. Most now just
post to the gentoo user group.
Where did your "bionic" work end up?
Good luck
Ed W
hth,
James
