Hi, Nachricht vom Montag, 4. August 2003, 15:51:25:
> Hi, > Nachricht vom Samstag, 2. August 2003, 23:59:46: >> Hi, >> I just bought a used APC UPS, being a Smart-UPS with a SmartSlot. >> In this SmartSlot is 9607 management card, which provides the second >> and third serial management-port. I can access the UPS via the first >> (built-in) serial-port just fine (using nut with the newapc driver) >> but I can't get anything of the ports on that expansion card. That >> card has a series of four DIP-Switches on it, but I have no >> documentation about that UPS, the expansion card or the >> DIP-Switches. >> Any hints? >> Anyone who can tell me anything about that card? >> Anyone who could just read of his settings of the DIP-Switches and >> tell me? >> Any help appreciated. >> Timo > I got a very helpful reply in the forum > http://forums.gentoo.org/viewtopic.php?t=72116 , but I am still > looking for docs on the exact settings of these DIP-Switches. > Timo Again, answering my self... I found this on the back of the card... +-----------------+---------+ | MODE SWITCH | 1 2 3 4 | +-----------------+---------+ | CONFIRMED | 0 0 0 - | | UNTIL LO-BATT | 0 0 1 - | | 2 MIN TIMER | 0 1 0 - | | 5 MIN | 0 1 1 - | | 10 MIN | 1 0 0 - | | 15 MIN | 1 0 1 - | | 30 MIN | 1 1 0 - | | 60 MIN | 1 1 1 - | +-----------------+---------+ | ADV = NORMAL | - - - 0 | | ADV = CONFIRMED | - - - 1 | +-----------------+---------+ Does anybody know what that means? Timo -- [EMAIL PROTECTED] mailing list