Hi Martin! Did you try to setup the printer from the web interface? You just have to point your web browser to http://localhost:631. Some times it works better than setting the printer configuration yourself. Hope that helps!
On Tue, 05 Aug 2003 19:56:46 +0200 Martin Monsorno <[EMAIL PROTECTED]> wrote: > Hi *, > > i have a problem while trying to print with CUPS from my gentoo > machine. > > - i have installed net-print/cups. > > - the printer is connected to a printserver (an SMC router), which > speaks the lpd protocoll, I can connect to this with telnet on port > 515, and i can print from a windows machine to it > > - according to this I configured CUPS to use the DeviceURI > lpd://router/lp (which is the correct URI according to the > printserver docs) > > - now when i try to print, /var/log/cups/error_log says: > > ,---- > | I [05/Aug/2003:19:45:43 +0200] Started filter > | /usr/lib/cups/filter/foomatic-rip (PID 7481) for job 11. E > | [05/Aug/2003:19:45:43 +0200] PID 7481 stopped with status 22! I > | [05/Aug/2003:19:45:43 +0200] Hint: Try setting the LogLevel to > | "debug" to find out more. I [05/Aug/2003:19:45:43 +0200] Started > | backend /usr/lib/cups/backend/lpd (PID 7482) for job 11. W > | [05/Aug/2003:19:45:43 +0200] [Job 11] Remote host did not respond > | with data status byte after 300 seconds! > `---- > > and /var/log/syslog says: > > ,---- > | Aug 5 19:19:31 igent kernel: Process rastertoprinter tried to read > | below stack Aug 5 19:19:31 igent kernel: addr: 7f7f7f7f, gpr1: > | 7ffff210, pc: 0fa66704, lr: 0fa64dd4i > `---- > > > Any hints what could be the problem? > > thanks > > -- > Martin > > -- > [EMAIL PROTECTED] mailing list > > -- [EMAIL PROTECTED] mailing list
