On Thu, Aug 14, 2003 at 09:49:59AM -0500, Thomas T. Veldhouse wrote:
> If it detected the chipset, it is almost certainly compiled in ... or it
> wouldn't have checked for it.
>
At boottime I get the following message: 'ICH4: chipset detected but
driver not compiled in!'
So I guess that at least the IDE part of my chipset is not in the
kernel.
Greetings
Michael
> Tom Veldhouse
>
> ----- Original Message -----
> From: "Michael Gruetzner" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, August 14, 2003 8:22 AM
> Subject: Re: [gentoo-user] Very bad performance
>
>
> > On Thu, Aug 14, 2003 at 03:05:39PM +0200, Arne Halenza wrote:
> > > Hi Michael,
> > >
> > > maybe your DMA mode is not activated? You can check and activate it
> > > using the "hdparm" command (check the man-page about the command, I
> > > don't know the details at the moment). I had a similar problem in the
> > > past. The chipset I used was supported, but not in DMA mode. So I had
> > > the slowest PIO mode.
> > >
> > No, I already enabled DMA Mode. I just found out that dmesg tells me
> > that an ICH4 chipset was detected but the driver was not compiled in,
> > so I guess that could be the reason. Do you know, where in the kernel
> > config I can enable the ICH4 Support?
> >
> > Greetings
> > Michael
> >
> > --
> > The man scarce lives who is not more credulous than he ought to be.... The
> > natural disposition is always to believe. It is acquired wisdom and
> experience
> > only that teach incredulity, and they very seldom teach it enough.
> > - Adam Smith
> >
> > --
> > [EMAIL PROTECTED] mailing list
> >
> >
>
>
> --
> [EMAIL PROTECTED] mailing list
--
We are anthill men upon an anthill world.
-- Ray Bradbury
--
[EMAIL PROTECTED] mailing list
