On Wed, Sep 17, 2003 at 07:56:59PM -0400, Ernie Schroder wrote:
> Thanks for the suggestions Pat. Iwas going to re-emerge
> 2.4.20-gentoo-r1 but it seems to have been removed from portage. I
> may be forced to build r-7 though I really wish I had that ebuild.
> Any ideas where I can find it?
>
I didn't realize it was gone. I tried searching google for it, but
had no luck.
Poking around in /usr/portage/distfiles, I did find:
linux-2.4.20.tar.bz2
patches-2.4.20-gentoo-r1.tar.bz2
Maybe you could recreate the 2.4.20-gentoo-r1 source tree with them.
But it'd probably be easier to just upgrade the kernel -- and besides
that, it's more likely to work ;-) I recently upgraded to
2.4.20-gentoo-r6, it was painless.
- PK
> On Wednesday 17 September 2003 04:19 pm, Pat Kerwan wrote:
> > On Wed, Sep 17, 2003 at 02:41:21PM -0400, Ernie Schroder wrote:
> > > aditional info:
> > > I can go into /usr/src/inux-2.4.20-gentoo-r7 and make menuconfig
> > > works.
> >
> > I'm not sure if this would help in this situation, but have you
> > tried running:
> >
> > # cp .config /tmp/
> > # make mrproper
> > # cp /tmp/.config .
> >
> > This often fixes problems that make clean doesn't. If that doesn't
> > work, I'd try re-emerging linux-2.4.20-gentoo-r1.
> >
> > Hope that helps,
> >
> > - PK
> >
> > > On Wednesday 17 September 2003 02:03 pm, Ernie Schroder wrote:
> > > > I want to add a module to my running kernel (2.4.20-gentoo-r1)
> > > > make menuconfig exits as below.
> > > >
> > > > MRK linux # make menuconfig
> > > > rm -f include/asm
> > > > ( cd include ; ln -sf asm-i386 asm)
> > > > make -C scripts/lxdialog all
> > > > make[1]: Entering directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/scripts/lxdialog'
> > > > make[1]: *** No rule to make target `all'. Stop.
> > > > make[1]: Leaving directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/scripts/lxdialog'
> > > > make: *** [menuconfig] Error 2
> > > >
> > > > Make xconfig seems to run normally but when I try to build the
> > > > modules, I get:
> > > >
> > > > make dep;make clean bzImage modules modules_install
> > > > make: *** No rule to make target `scripts/mkdep.c', needed by
> > > > `scripts/mkdep'. Stop.
> > > > make[1]: Entering directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/arch/i386/boot'
> > > > rm -f tools/build
> > > > rm -f setup bootsect zImage compressed/vmlinux.out
> > > > rm -f bsetup bbootsect bzImage compressed/bvmlinux.out
> > > > make[2]: Entering directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/arch/i386/boot/compressed'
> > > > rm -f vmlinux bvmlinux _tmp_*
> > > > make[2]: Leaving directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/arch/i386/boot/compressed'
> > > > make[1]: Leaving directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/arch/i386/boot'
> > > > find . \( -name '*.[oas]' -o -name core -o -name '.*.flags' \)
> > > > -type f -print \
> > > >
> > > > | grep -v lxdialog/ | xargs rm -f
> > > >
> > > > rm -f kernel/ksyms.lst include/linux/compile.h vmlinux
> > > > System.map .tmp* drivers/char/consolemap_deftbl.c
> > > > drivers/video/promcon_tbl.c drivers/char/conmakehash
> > > > drivers/char/drm/*-mod.c
> > > > drivers/pci/devlist.h drivers/pci/classlist.h
> > > > drivers/pci/gen-devlist drivers/zorro/devlist.h
> > > > drivers/zorro/gen-devlist
> > > > drivers/sound/bin2hex drivers/sound/hex2hex
> > > > drivers/atm/fore200e_mkfirm
> > > > drivers/atm/{pca,sba}*{.bin,.bin1,.bin2}
> > > > drivers/scsi/aic7xxx/aicasm/aicasm
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_gram.c
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_gram.h
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.c
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.h
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_macro_scan.c
> > > > drivers/scsi/aic7xxx/aicasm/aicasm_scan.c
> > > > drivers/scsi/aic7xxx/aicasm/aicdb.h
> > > > drivers/scsi/aic7xxx/aicasm/y.tab.h drivers/scsi/53c700_d.h
> > > > net/khttpd/make_times_h net/khttpd/times.h submenu*
> > > > rm -rf modules
> > > > make -C Documentation/DocBook clean
> > > > make[1]: Entering directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/Documentation/DocBook'
> > > > rm -f core *~
> > > > rm -f wanbook.sgml z8530book.sgml mcabook.sgml videobook.sgml
> > > > kernel-api.sgml parportbook.sgml kernel-hacking.sgml
> > > > kernel-locking.sgml via-audio.sgml mousedrivers.sgml
> > > > sis900.sgml deviceiobook.sgml procfs-guide.sgml tulip-user.sgml
> > > > journal-api.sgml rm -f wanbook.dvi z8530book.dvi mcabook.dvi
> > > > videobook.dvi kernel-api.dvi parportbook.dvi
> > > > kernel-hacking.dvi kernel-locking.dvi via-audio.dvi
> > > > mousedrivers.dvi sis900.dvi deviceiobook.dvi procfs-guide.dvi
> > > > tulip-user.dvi journal-api.dvi wanbook.aux z8530book.aux
> > > > mcabook.aux videobook.aux kernel-api.aux parportbook.aux
> > > > kernel-hacking.aux
> > > > kernel-locking.aux via-audio.aux mousedrivers.aux sis900.aux
> > > > deviceiobook.aux procfs-guide.aux tulip-user.aux
> > > > journal-api.aux wanbook.tex z8530book.tex mcabook.tex
> > > > videobook.tex kernel-api.tex parportbook.tex
> > > > kernel-hacking.tex
> > > > kernel-locking.tex via-audio.tex mousedrivers.tex sis900.tex
> > > > deviceiobook.tex procfs-guide.tex tulip-user.tex
> > > > journal-api.tex wanbook.log z8530book.log mcabook.log
> > > > videobook.log kernel-api.log parportbook.log
> > > > kernel-hacking.log
> > > > kernel-locking.log via-audio.log mousedrivers.log sis900.log
> > > > deviceiobook.log procfs-guide.log tulip-user.log
> > > > journal-api.log wanbook.out z8530book.out mcabook.out
> > > > videobook.out kernel-api.out parportbook.out
> > > > kernel-hacking.out
> > > > kernel-locking.out via-audio.out mousedrivers.out sis900.out
> > > > deviceiobook.out procfs-guide.out tulip-user.out
> > > > journal-api.out rm -f parport-share.png parport-multi.png
> > > > parport-structure.png parport-share.eps parport-multi.eps
> > > > parport-structure.eps rm -f procfs_example.sgml
> > > > make[1]: Leaving directory
> > > > `/usr/src/linux-2.4.20-gentoo-r1/Documentation/DocBook'
> > > > make: *** No rule to make target `init/main.c', needed by
> > > > `init/main.o'. Stop.
> > > >
> > > > Please help. I'm about to dash a new scanner to pieces.
> > >
> > > --
> > > Regards, Ernie
> > > 100% Microsoft and Intel free
> > >
> > >
> > > --
> > > [EMAIL PROTECTED] mailing list
> >
> > --
> > [EMAIL PROTECTED] mailing list
>
> --
> Regards, Ernie
> 100% Microsoft and Intel free
>
>
> --
> [EMAIL PROTECTED] mailing list
--
[EMAIL PROTECTED] mailing list
