What version of FreeBSD are you running? I'm asking because starting with 5.0, UFS2 is included, and you will need support for that in Linux if you used it. The UFS(1) module will not mount UFS2 slices.
Maybe this link can help: http://www1.coe.neu.edu/~haydin/linux/faq/minihowto/Linux+FreeBSD-5.html If it still fails, try disktype to see if the partition is recognized: http://freshmeat.net/projects/disktype/?topic_id=142%2C147%2C253 Good luck! On Thu, 2003-11-06 at 13:46, Ken McLennan wrote: > G'day there Gentoo List Members, > > I originally wrote a query in this message inquiring into non-root access, but > before sending it I found the answer in the forums. I've now fixed that problem > (thanks very much to the Gentoo community), but I still have one to go and I'm > stumped.. > > My fstab file is thus: > > # <fs> <mountpoint> <type> <opts> > <dump/pass> > > # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts. > /dev/hdb5 /boot ext3 noauto,noatime 1 1 > /dev/hdb7 / ext3 noatime 0 0 > /dev/hdb6 none swap sw 0 0 > /dev/hdb8 /usr ext3 noatime 0 0 > /dev/cdroms/cdrom0 /mnt/cdrom_0 iso9660 users,noauto,ro 0 0 > /dev/cdroms/cdrom1 /mnt/cdrom_1 iso9660 users,noauto,rw 0 0 > > /dev/hd0 /mnt/floppy vfat users,rw,noauto 0 0 > /dev/hda1 /mnt/c_drive ntfs users,ro,auto 0 0 > /dev/hda2 /mnt/d_drive umsdos 0 0 > /dev/hdb2 /mnt/e_drive vfat users,rw,auto 0 0 > /dev/hdb3 /mnt/f_drive ufs ufstype=old 0 0 > /dev/hdb4 /mnt/g_drive vfat users,rw,auto 0 0 > > or at least, these are the bits I've put in there. > > Can anyone please give me some advice as to how to read FreeBSD partitions > under Linux? I've tried various options for the ufstype as outlined in the manpages > for mount & fstab, but without success. /dev/hdb3 is a 20gig partition on which I've > installed a FreeBSD filesystem with the usual subpartitions as set up by the 'auto' > function in their version of fdisk. I'd like to have lilo offer it on bootup along > with Gentoo & Win_XP, but I can't seem to get Gentoo Linux to recognise what's > there. I've never tried to fiddle with BSD before, so I'm sure that the install is > OK, but I've got something wrong here. Any ideas as to what I've done wrong? > > I should add that /dev/hdb3 is, I think, an extended partition with hdb10, > hdb11, hdb12, and hdb13 inside it. > > See ya & thanks > Ken McLennan > Brisbane, Australia. > > -- > [EMAIL PROTECTED] mailing list -- ______________________________________________________________________ Guy Van Sanden http://unixmafia.port5.com Registered Linux user #249404 - September 1997 ______________________________________________________________________ -- [EMAIL PROTECTED] mailing list
