Hi, I know a number of threads on the forums have been devoted to this topic: I searched through most if not all of them.
With their help I've almost managed to get the ADSL modem working. As far as I can tell the problem lies with installing the microkernel. The logs output the following: Dec 9 21:50:49 [modem_run] modem_run version 1.2-beta2 started by root uid 0_ Dec 9 21:50:51 [kernel] usb_control/bulk_msg: timeout Dec 9 21:51:06 [modem_run] ADSL synchronization has been obtained_ Dec 9 21:51:06 [modem_run] ADSL line is up (576 kbit/s down | 288 kbit/s up)_ Dec 9 21:51:07 [kernel] CSLIP: code copyright 1989 Regents of the University of California Dec 9 21:51:07 [kernel] PPP generic driver version 2.4.2 Dec 9 21:51:07 [pppd] pppd 2.4.1 started by root, uid 0 Dec 9 21:51:07 [pppd] Using interface ppp0 Dec 9 21:51:07 [pppd] Connect: ppp0 <--> /dev/pts/2 Dec 9 21:51:07 [pppoa3] pppoa3 version 1.2-beta3 started by root (uid 0)_ Dec 9 21:51:07 [pppoa3] Control thread ready_ Dec 9 21:51:07 [kernel] HDLC line discipline: version $Revision: 3.3 $, maxframe=4096 Dec 9 21:51:07 [pppoa3] host --> pppoa3 --> modem stream ready_ Dec 9 21:51:07 [pppoa3] modem --> pppoa3 --> host stream ready_ Dec 9 21:51:38 [pppd] LCP: timeout sending Config-Requests_ Dec 9 21:51:38 [pppd] Connection terminated. Dec 9 21:51:38 [pppoa3] Error reading from source device_ Dec 9 21:51:38 [pppoa3] Woken by a sem_post event -> Exiting_ Dec 9 21:51:38 [pppoa3] Write to usb Canceled Dec 9 21:51:38 [pppoa3] Exiting I have donwloaded and installed the latest version of the speedtouch drivers and mgmt.o. I have also compiled the kernel with the required modules. I know the modem works as I can connect OK with WinXP. So any clues? Cheers Dg -- [EMAIL PROTECTED] mailing list
