On Fri, 9 Jan 2004 03:02 pm, Dennis Robertson wrote: > Hello List, > > I have finally managed to get direct rendering to work with my asus A7N8X > dlxe mobo and ati 9700pro graphics card using the 2.6.0-mm1 kernel. > However, there seem to be problems with the installation. Alsa also works > but doesn't seem to like it much. I also get a message about hdc. The > messages are:
Following GLSA 200401-01 I replaced my kernel with 2.6.1-r1-mm2 as advised and the alsa and dev hdc problems have disappeared. The following remains: > Direct Rendering: > fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, > GERMANY' taints kernel. > [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes. > [fglrx] module loaded - fglrx 3.2.8 [Sep 21 2003] on minor 0 > Debug: sleeping function called from invalid context at mm/slab.c:1868 > in_atomic():1, irqs_disabled():0 > Call Trace: > [<c011e59b>] __might_sleep+0xab/0xd0 > [<c0142d25>] kmem_cache_alloc+0x65/0x70 > [<e0adfc8b>] __ke_alloc_wait_queue_head_struct+0x1b/0x30 [fglrx] > [<e0ae2bf1>] firegl_setup_dev+0x91/0x1b0 [fglrx] > [<e0ae2c6c>] firegl_setup_dev+0x10c/0x1b0 [fglrx] > [<e0ae2184>] firegl_open+0x174/0x230 [fglrx] > [<e0ae20c2>] firegl_open+0xb2/0x230 [fglrx] > [<e0adf9ed>] firegl_stub_open+0x10d/0x1d0 [fglrx] > [<c01608b4>] chrdev_open+0xf4/0x220 > [<c01be161>] devfs_open+0xe1/0xf0 > [<c01565aa>] dentry_open+0x15a/0x230 > [<c0156446>] filp_open+0x66/0x70 > [<c01568f3>] sys_open+0x53/0x90 > [<c035b8e3>] syscall_call+0x7/0xb > > [fglrx] AGP detected, AgpState = 0x1f00421b (hardware caps of chipset) > agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. > agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode > agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode > [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps) > [fglrx] free AGP = 121909248 > [fglrx] max AGP = 121909248 > [fglrx] free LFB = 122683392 > [fglrx] max LFB = 122683392 > [fglrx] free Inv = 0 > [fglrx] max Inv = 0 > [fglrx] total Inv = 0 > [fglrx] total TIM = 0 > [fglrx] total FB = 0 > [fglrx] total AGP = 32768 > atkbd.c: Unknown key released (translated set 2, code 0x7a on > isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a > on isa0060/serio0). Debug: sleeping function called from invalid context at > include/asm/semaphore.h:119 > in_atomic():1, irqs_disabled():0 > Call Trace: > [<c011e59b>] __might_sleep+0xab/0xd0 > [<e0ae0209>] __ke_down_struct_sem+0x29/0x40 [fglrx] > [<e0aee003>] drm_find_file+0x23/0x70 [fglrx] > [<e0aee32f>] drm_getmagic+0xff/0x160 [fglrx] > [<e0aee230>] drm_getmagic+0x0/0x160 [fglrx] > [<e0ae24f6>] firegl_ioctl+0x146/0x1b0 [fglrx] > [<c0169bd4>] sys_ioctl+0xf4/0x290 > [<c035b8e3>] syscall_call+0x7/0xb > (Repeated 8 times) I would be very grateful if anyone can advise me on how to correct the problems causing this message. TIA. -- Dennis Robertson 2/2 Sylvia Street Noosaville QLD Australia Phone: 61 7 54742343 Mobile: 0419 535539 -- [EMAIL PROTECTED] mailing list