When trying to start my second nic I get
bash-2.05b# /etc/init.d/net.eth1 start * Bringing eth1 up...
SIOCSIFADDR: No such device
eth1: unknown interface: No such device
SIOCSIFBRDADDR: No such device
eth1: unknown interface: No such device
SIOCSIFNETMASK: No such device
* Failed to bring eth1 up
My /etc/conf.d/net is as follows
------------------------------ # card on the laptop iface_eth0="192.168.0.5 broadcast 192.168.0.255 netmask 255.255.255.0" # # card on the port replicator iface_eth1="192.168.0.5 broadcast 192.168.0.255 netmask 255.255.255.0" # gateway="eth0/192.168.0.1" ------------------------------
I would like to use the nic on the port replicator at work and the nic on the laptop at home. Both at home and at work the laptop is on an intranet behind a firewall router. The gateway address is the same in both intranets.
I created the symbolic link for the init.d script
ln -s /etc/init.d/net.eth0 /etc/init.d/net.eth1
The result from lspci is
------------------------------------------------------------------------------- bash-2.05b# lspci 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04) 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03) 00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03) 00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2) 02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10) 02:06.0 PCI bridge: Actiontec Electronics Inc: Unknown device 0100 (rev 11) 02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller 02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller 08:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 08:08.0 Communication controller: Lucent Microelectronics WinModem 56k (rev 01) -------------------------------------------------------------------------------
I have built support for both nic into the kernel 2.4.22-r5.
Also another error:
bash-2.05b# ifconfig eth1 eth1: error fetching interface information: Device not found
What is the output of 'dmesg | grep eth'?
-- Andrew Gaffney Network Administrator Skyline Aeronautics, LLC. 636-357-1548
-- [EMAIL PROTECTED] mailing list
