Hi everyone, ok, I'm trying to get sound out of my Creative SoundBlaster MP3+ (external, USB).
So far, all the logs show me that it's being recognized by snd-usb-audio, at least: -- # lsusb: ... Bus 001 Device 003: ID 041e:3010 Creative Technology, Ltd Bus 001 Device 002: ID 0409:0059 NEC Corp. HighSpeed Hub ... # cat /proc/asound/card0/stream0 Creative Labs Sound Blaster MP3+ at usb-0000:00:1d.7-3.1, full speed : USB Audio Playback: Status: Stop Interface 1 Altset 1 Format: S16_LE Channels: 2 Endpoint: 1 OUT (ADAPTIVE) Rates: 48000 Capture: Status: Stop Interface 2 Altset 1 Format: S16_LE Channels: 2 Endpoint: 2 IN (ASYNC) Rates: 48000, 44100 # cat /etc/modules.conf ... alias char-major-116 snd alias char-major-14 soundcore alias snd-card-0 snd-usb-audio alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss ... -- All volume settings were demuted and set to max using alsamixer or kmix. - using kernel 2.6.10: When I try to play something in xmms or bmp, the time label gets frozen, and I don't hear anything (the GUI doesn't freeze, though). Instead, this is what i get in a console: > ** WARNING **: alsa_free(): snd_pcm_start() failed: Broken pipe This message is outputted infinitely until I kill -9 the player. Meanwhile, the same happens in the kernel log with the following message: > cannot submit datapipe for urb 0, err = -38 This is also being outputted infinitely. - using kernel 2.6.11-rc1-mm1 After upgrading, I surprisingly do hear sound, however it's overlayed with a kind of choppy "noise": 3 x "pop", pause, 3x "pop", pause, ... this scheme loops approx. 3x/sec. I've already tried using mmap mode and/or software mixing and playing with aplay or mplayer. Nothing helps. Any ideas? Thanks, Artjom -- gentoo-user@gentoo.org mailing list
