I checked the BIOS , everything seems ok , in particular "AC97 Audio" is set to Auto. The options are Auto/No. The motherboard is GigaByte i865. I am pretty sure the kernel is ok too - it used to work on the very same kernel ( before installing Audigy ) , and even if the modules were missing shouldn't it show up on lspci ? Any other ideas ?
On Sat, 2005-01-15 at 18:05 +0000, Douglas James Dunn wrote: > the only other thing i could think of is not having the right kernel > modules in it > > On Sun, 2005-01-16 at 03:21 +0900, Chul-Han Yoon wrote: > > Ivan Yosifov wrote: > > > > >Hello Everyone, > > > > > >I have a motherboard with intel8x0 on-board audio that used to work > > >fine. I need to have two sound cards , so I have installed Creative Labs > > >SB Audigy LS , which also works fine. However the onboard audio no > > >longer shows up in lspci: > > > > > >[EMAIL PROTECTED] ~ $ lspci > > >0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM > > >Controller/Host-Hub Interface (rev 02) > > >0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller > > >(rev 02) > > >0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > > >UHCI Controller #1 (rev 02) > > >0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > > >UHCI Controller #2 (rev 02) > > >0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > > >UHCI #3 (rev 02) > > >0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB > > >UHCI Controller #4 (rev 02) > > >0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 > > >EHCI Controller (rev 02) > > >0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) > > >0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC > > >Interface Bridge (rev 02)0000:00:1f.1 IDE interface: Intel Corp. > > >82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) > > >0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) SATA Controller > > >(rev 02) > > >0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller > > >(rev 02) > > >0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 > > >[GeForce4 MX 440 AGP 8x] (rev c1) > > >0000:02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > >RTL-8139/8139C/8139C+ (rev 10) > > >0000:02:02.0 Multimedia audio controller: Creative Labs SB Audigy LS > > >0000:02:09.0 Ethernet controller: Marvell Technology Group Ltd. Yukon > > >Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) > > > > > >Only the Audigy shows up , and I need to have them both. Any ideas why > > >the on-board audio disappeared and how to make it show up again ? > > > > > Check your CMOS Setup > > > > -- > > gentoo-user@gentoo.org mailing list > > > > > > -- Thanks, Ivan Yosifov. -- gentoo-user@gentoo.org mailing list
