cApTaiN_FaNtAsTiK
> here's a detail of my Xorg file:
*************************************************** Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection
# This loads the font modules Load "type1" # Load "speedo" Load "freetype" # Load "xtt"
# This loads the GLX module Load "glx" # This loads the DRI module # Load "dri"
EndSection
# ********************************************************************** # Files section. This allows default font and rgb paths to be set # **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # #
FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" # FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/local/" # FontPath "/usr/share/fonts/Speedo/" # FontPath "/usr/share/fonts/TrueType/" # FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# ********************************************************************** # Server flags section. # **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# ********************************************************************** # Input devices # **********************************************************************
# ********************************************************************** # Core keyboard's InputDevice section # **********************************************************************
Section "InputDevice"
Identifier "Keyboard1" Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg # Option "XkbRules" "xorg" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg" Option "XkbModel" "microsoft" Option "XkbLayout" "ca_enhanced"
EndSection
# ********************************************************************** # Core Pointer's InputDevice section # **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment # the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted.
# Option "BaudRate" "9600" # Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons" # Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the xorg.conf man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection
# ********************************************************************** # Monitor section # **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 57.0
# HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-90
EndSection
# ********************************************************************** # Graphics device section # **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section.
Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device" Identifier "** NVIDIA (generic) [nv]" Driver "nvidia" #VideoRam 65536 # Insert Clocks lines here if appropriate EndSection
# ********************************************************************** # Screen sections # **********************************************************************
# Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "** NVIDIA (generic) [nv]" Monitor "My Monitor" DefaultDepth 16
Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1024x768" ViewPort 0 0 EndSubsection EndSection
# ********************************************************************** # ServerLayout sections. # **********************************************************************
# Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone.
Section "ServerLayout"
# The Identifier line must be present Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents".
InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI" # Mode 0666 # EndSection
*****************************************
_________________________________________________________________
Des mécanismes de contrôle parental puissants permettent à votre enfant de découvrir tout ce qu’Internet a à offrir. http://join.msn.com/?pgmarket=fr-ca&page=features/parental&ST=1&xAPID=1983&DI=2043 Commencez dès maintenant à profiter de tous les avantages de MSN Premium et obtenez les deux premiers mois GRATUITS*.
-- gentoo-user@gentoo.org mailing list