> On Thu, 24 Mar 2005, Patrick Marquetecken wrote: > >> I have installed a Adaptec ANA-6944A/TX fast 4 port ethernet card >> (32-bit). >> It works fine with the tulip dirver. >> If i run ethtool on these ports i always get this error, never with my >> other networdcards. >> >> vpn_bxl init.d # ethtool eth3 >> Settings for eth3: >> No data available >> >> what coult this be? > > Which kernel version are you running? 2.6.10-gentoo-r6 > > Can you run 'lspci' and show output? (If you dont have lspci then run > "emerge pciutils"). 0000:11:04.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) 0000:11:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) 0000:11:06.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) 0000:11:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) > Patrick
> -- > Aj > -- > gentoo-user@gentoo.org mailing list > > > -- cccc -- gentoo-user@gentoo.org mailing list