thank's, I know it is rare, but I forgot to write that it's not the first time I recompile the kernel, I should've do it at least 8 or 9 times, and it only failed when iptables where added. After the crash I booted from the old kernel and compile it again whitout iptables,boot from the new bzImage, and everything was fine. ...very strange thing....
--- "A. Khattri" <[EMAIL PROTECTED]> escribió: > On Wed, 11 May 2005, pepe antartico wrote: > > > I have a very strange and annoying problem, please > > need help. > > I added iptables support and recompiled my kernel > (is > > 2.6.11.7), then when rebooting, the startup > sequence > > stops after 10 or 15 seconds and freezes in a > blank > > screen. I tried recompiling the kernel with > iptables > > as modules and got the same result. When booting > from > > my old kernel everything is normal. I even tried > > several combinations compiling some options as > modules > > an others within the kernel but when booting got > stuck > > again. > > I really need help on this, any sugestions will be > > appreciated. > > iptables probably has nothing to do with this > problem. > > Perhaps you have enabled the console framebuffer but > it is the wrong > chipset. My advice would be to disable all > framebuffers until you get > everything else working. You can always go back and > fix that later. > > > -- > > -- > gentoo-user@gentoo.org mailing list > > _________________________________________________________ Do You Yahoo!? Información de Estados Unidos y América Latina, en Yahoo! Noticias. Visítanos en http://noticias.espanol.yahoo.com -- gentoo-user@gentoo.org mailing list
