Michael Haan ([EMAIL PROTECTED]) scribbled: > Ok, finally, the card loads: > > cx2388x dvb driver version 0.0.4 loaded cx88[0]: subsystem: 7063:3000, > board: pcHDTV HD3000 HDTV [card=22,autodetected] saa7115: starting > probe for adapter cx88[0] (0x1001b) tuner 1-0061: chip found @ 0xc2 > (cx88[0]) tuner 1-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) > ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt > 0000:02:08.2[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 225 > cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: 225, latency: 32, mmio: > 0xd9000000 cx88[0]/2: cx2388x based dvb card DVB: registering new > adapter (cx88[0]). DVB: registering frontend 0 (pcHDTV HD3000 > HDTV)... > > > But then I get this (I think when trying to scan channels?): > > or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)... > or51132: No firmware uploaded(timeout or file not found?) > > I do have the file: > > [EMAIL PROTECTED] util # find / -name dvb-fe-or51132-qam.fw > /usr/lib64/hotplug/firmware/dvb-fe-or51132-qam.fw > > Not sure if it's in the right place or not, though. I'm almost there > - can anyone help?
I believe firmware default location is '/lib/firmware', you may have to create the dir. hth, cooper. -- gentoo-user@gentoo.org mailing list
