On Monday 06 June 2005 18:24, Hans Hvelplund Odborg wrote:
> I think this may happen if you're emerging in parallel (e.g. emerge started
> on
> two consoles)
Nope this is not the case:
[EMAIL PROTECTED] ~ # grep MAKEOPTS /etc/make.conf
MAKEOPTS="-j1"
[EMAIL PROTECTED] ~ #
Besides, a colegue of mine has the same problem
> Stoian Ivanov wrote:
>
> > [EMAIL PROTECTED] ~ # emerge -a foomatic-db-engine
> >
> > These are the packages that I would merge, in order:
> >
> > Calculating dependencies ...done!
> > [ebuild R ] net-print/foomatic-db-engine-3.0.2
> >
> > Do you want me to merge these packages? [Yes/No]
> >>>> emerge (1 of 1) net-print/foomatic-db-engine-3.0.2 to /
> >>>> md5 files ;-) foomatic-db-engine-3.0.2.ebuild
> >>>> md5 files ;-) foomatic-db-engine-3.0.0.20031018.ebuild
> >>>> md5 files ;-) foomatic-db-engine-3.0.1.ebuild
> >>>> md5 files ;-) foomatic-db-engine-3.0.0.ebuild
> >>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.0
> >>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.1
> >>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.2
> >>>> md5 files ;-) files/perl-module-3.0.1.diff
> >>>> md5 files ;-) files/digest-foomatic-db-engine-3.0.0.20031018
> >>>> md5 files ;-) files/perl-module.diff
> >>>> md5 src_uri ;-) foomatic-db-engine-3.0.2.tar.gz
> >>>> Unpacking source...
> >>>> Unpacking foomatic-db-engine-3.0.2.tar.gz to
> >>>> /var/tmp/portage/foomatic-db-engine-3.0.2/work Source unpacked.
> > * Applying perl-module-3.0.1.diff ...
> >
> > [ ok ]
> > ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man
> > --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc
> > --localstatedir=/var/lib --build=i686-pc-linux-gnu creating cache
> > ./config.cache checking for gcc... gcc checking whether the C compiler
> > (gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe ) works... yes
> > checking whether the C compiler (gcc -O3 -march=athlon-xp
> > -fomit-frame-pointer -pipe ) is a cross-compiler... no checking whether we
> > are using GNU C... yes checking whether gcc accepts -g... yes checking for
> > a BSD compatible install... /bin/install -c checking whether ln -s
> > works... yes checking whether make sets ${MAKE}... yes
> > checking for xml2-config... /usr/bin/xml2-config
> > checking for dirent.h that defines DIR... yes
> > checking for opendir in -ldir... no
> > checking how to run the C preprocessor... gcc -E
> > checking for ANSI C header files... yes
> > checking for working const... yes
> > checking for strdup... yes
> > checking for strspn... yes
> > checking for strstr... yes
> > checking for xmlParseFile... no
> > checking for xmlCreatePushParserCtxt... no
> > checking for xmlParseChunk... no
> > checking for xmlFreeParserCtxt... no
> > checking for xmlFreeDoc... no
> > checking for xmlDocGetRootElement... no
> > checking for xmlNodeListGetString... no
> > checking for file... /usr/bin/file
> > checking for cat... /usr/bin/cat
> > checking for gs... /usr/bin/gs
> > checking for a2ps... A2PS_NOT_FOUND
> > checking for wget... /usr/bin/wget
> > checking for curl... /usr/bin/curl
> > checking for printf... /usr/bin/printf
> > checking GhostScript check... no
> > GS /usr/bin/gs
> > checking how to redirect GhostScript output to fd 3... ACCESS DENIED
> > open_wr: /dev/fd/3 ./configure: line 1763: /dev/fd/3: Permission denied
> > using |/usr/bin/cat >&3
> > checking for perl... /usr/bin/perl
> > Checking whether Perl will find libraries installed under /usr... yes
> > checking for bash... /bin/bash
> > checking for lpd/... no
> > checking for lp-errs... no
> > checking for lpd... no
> > checking for printcap... /etc/printcap
> > checking for lpd.conf... no
> > checking for lpr-lpd... no
> > checking for lpr-lprng... no
> > checking for lpr-lpr... no
> > checking for lpr... /usr/bin/lpr
> > checking for lpq-lpd... no
> > checking for lpq-lprng... no
> > checking for lpq-lpr... no
> > checking for lpq... /usr/bin/lpq
> > checking for lprm-lpd... no
> > checking for lprm-lprng... no
> > checking for lprm-lpr... no
> > checking for lprm... /usr/bin/lprm
> > checking for lpc-lpd... no
> > checking for lpc-lprng... no
> > checking for lpc-lpr... no
> > checking for lpc... no
> > checking for checkpc... no
> > checking for cups/... /etc/cups
> > checking for lpadmin... /usr/sbin/lpadmin
> > checking for lpstat... /usr/bin/lpstat
> > checking for cups/model/... /usr/share/cups/model
> > checking for cups/filter/... /usr/lib/cups/filter
> > checking for cups/backend/... /usr/lib/cups/backend
> > checking for cups/printers.conf... /etc/cups/printers.conf
> > checking for lpr-cups... no
> > checking for lpr... /usr/bin/lpr
> > checking for lpq-cups... no
> > checking for lpq... /usr/bin/lpq
> > checking for lprm-cups... no
> > checking for lprm... /usr/bin/lprm
> > checking for lpc-cups... no
> > checking for lpc... no
> > checking for lp-cups... no
> > checking for lp... /usr/bin/lp
> > checking for cancel-cups... no
> > checking for cancel... /usr/bin/cancel
> > checking for enable-cups... no
> > checking for enable... /usr/bin/enable
> > checking for disable-cups... no
> > checking for disable... /usr/bin/disable
> > checking for accept-cups... no
> > checking for accept... no
> > checking for reject-cups... no
> > checking for reject... no
> > checking for lpmove... no
> > checking for lpoptions... /usr/bin/lpoptions
> > checking for lpinfo... /usr/sbin/lpinfo
> > checking for pdq/... no
> > checking for pdq/printrc... no
> > checking for pdq... no
> > checking for lpr-pdq... no
> > checking for ppr/bin/pprd... no
> > checking for ppr/interfaces/... /usr/lib/ppr/interfaces
> > checking for ppr/PPDFiles/... no
> > checking for ppr/... no
> > checking for ppr... no
> > checking for lpr-ppr... no
> > checking for ppad... no
> > checking for ppop... no
> > checking for nc... no
> > checking for netcat... no
> > checking for rlpr... no
> > checking for smbclient... /usr/bin/smbclient
> > checking for nprint... no
> > checking for ptal-connect... /usr/bin/ptal-connect
> > checking for ptal-printd/... no
> > checking for mtink/... no
> > checking for gzip... /bin/gzip
> > checking for foomatic/db/source/... /usr/share/foomatic/db/source
> > checking for db/source/... no
> > checking for foomatic-rip... /usr/bin/foomatic-rip
> > checking for foomatic-rip... no
> > updating cache ./config.cache
> > creating ./config.status
> > creating Makefile
> > creating makeDefaults
> > creating makeMan
> > creating foomatic-configure
> > creating foomatic-printjob
> > creating foomatic-kitload
> > creating foomatic-ppdfile
> > creating foomatic-preferred-driver
> > creating foomatic-cleanupdrivers
> > creating foomatic-getpjloptions
> > creating foomatic-addpjloptions
> > creating foomatic-compiledb
> > creating foomatic-fix-xml
> > creating foomatic-nonumericalids
> > creating foomatic-replaceoldprinterids
> > creating foomatic-ppd-options
> > creating foomatic-printermap-to-gimp-print-xml
> > Finished configuring.
> > Type 'make' to build the package
> > then 'make install' to install it.
> > chmod a+rx ./makeDefaults
> > ./makeDefaults
> > if [ x = x--inplace ] ; then touch .testing-stamp ; fi
> > ( cd lib && /usr/bin/perl Makefile.PL verbose INSTALLDIRS=site )
> > ABSTRACT => q[Foomatic printer configuration library code]
> > AUTHOR => q[Grant Taylor <[EMAIL PROTECTED]>]
> > INSTALLDIRS => q[site]
> > NAME => q[Foomatic]
> > PREFIX => q[/usr]
> > PREREQ_PM => { }
> > Using PERL=/usr/bin/perl5.8.6
> > Writing Makefile for Foomatic
> > gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe -o foomatic-combo-xml
> > foomatic-combo-xml.c foomatic-combo-xml.c: In function `loadidlist':
> > foomatic-combo-xml.c:153: warning: assignment from incompatible pointer
> > type foomatic-combo-xml.c: In function `parse':
> > foomatic-combo-xml.c:1172: warning: assignment from incompatible pointer
> > type foomatic-combo-xml.c:1188: warning: assignment from incompatible
> > pointer type gcc -O3 -march=athlon-xp -fomit-frame-pointer -pipe
> > -I/usr/include/libxml2 -L/usr/lib -lxml2 -lz -lpthread -lm -o
> > foomatic-perl-data foomatic-perl-data.c foomatic-perl-data.c: In function
> > `perlquote': foomatic-perl-data.c:326: warning: assignment discards
> > qualifiers from pointer target type foomatic-perl-data.c:327: warning:
> > assignment discards qualifiers from pointer target type chmod a+rx
> > ./makeMan ./makeMan for m in foomatic-printjob foomatic-configure
> > foomatic-combo-xml foomatic-perl-data foomatic-ppdfile foomatic-compiledb
> > foomatic-ppd-options foomatic-kitload foomatic-getpjloptions
> > foomatic-addpjloptions foomatic-preferred-driver foomatic-fix-xml
> > foomatic-nonumericalids foomatic-replaceoldprinterids
> > foomatic-printermap-to-gimp-print-xml; do \
> > /usr/bin/perl -p -i -e "s=use lib '.*lib/';\n==s" $m; \
> > done
> > chmod a+rx Makefile makeDefaults makeMan foomatic-configure
> > foomatic-printjob foomatic-kitload foomatic-ppdfile
> > foomatic-preferred-driver foomatic-cleanupdrivers foomatic-getpjloptions
> > foomatic-addpjloptions foomatic-compiledb foomatic-fix-xml
> > foomatic-nonumericalids foomatic-replaceoldprinterids foomatic-ppd-options
> > foomatic-printermap-to-gimp-print-xml mkinstalldirs
> > --------------------------- ACCESS VIOLATION SUMMARY
> > --------------------------- LOG FILE =
> > "/tmp/sandbox-net-print_-_foomatic-db-engine-3.0.2-13846.log"
> >
> > open_wr: /dev/fd/3 (symlink to /proc/14225/fd/3)
> >
> --------------------------------------------------------------------------------
> > [EMAIL PROTECTED] ~ #
> >
> >
--
gentoo-user@gentoo.org mailing list
