Le 26/02/2011 13:11, Volker Armin Hemmann a écrit : > On Saturday 26 February 2011 13:03:00 Roger Cahn wrote: >> Hi, >> >> Since I have installed kernel amd64 I have nomore >> cdrom and sr0 in /dev >> Here is my emerge --info: > which is useless. dmesg and kernel config would be much more helpfull. > Especially the scsi part of kernel config. Stuff like cdrom support. >
Hi everybody, I encounter the same problem with x86 system (Everything is ok on my second x86_64 PC). I didn't change anything in kernel configuration and recently, /dev/cdrom and /dev/sr0 disappeared. So, i can't mount any cdrom, but surprisingly, i can burn or erase a RW dvdrom with Brasero... dmesg does not show any error message before or after inserting cdrom or dvdrom. # dmesg | grep cdrom #cdrom: Uniform CD-ROM driver Revision: 3.20 # dmesg | grep sr0 # I don't use hal (-hal in make.conf) My kernel configuration : # SCSI device support CONFIG_SCSI_MOD=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # SCSI support type (disk, tape, CD-ROM) # CONFIG_SCSI_ENCLOSURE is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set Thank you very much for your help, Best regards -- Jacques
